summaryrefslogtreecommitdiff
path: root/configs/omap3_logic_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-27configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-15configs: omap3x_logic: Fix boot hang by reducing SYS_MALLOC_F_LENAdam Ford1-1/+1
The AM3517 uses SYS_MALLOC_F_LEN of size 0x3000, but the rest of the OMAP3 boards from LogicPD / BeaconEmbedded use 0x4000, but they don't boot SPL. Reduce the malloc size to restore booting. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210625185717.243211-1-aford173@gmail.com
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-25configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-24ARM: enable LTO for some boardsMarek Behún1-0/+1
Enable LTO for some boards that were tested by people on U-Boot Mailing List. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Adam Ford <aford173@gmail.com> Tested-by: Pali Rohár <pali@kernel.org> Tested-by: Tim Harvey <tharvey@gateworks.com>
2021-05-11configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-15configs: omap3_logic: Enable CONFIG_SPL_ALLOC_BDAdam Ford1-0/+1
With bd_info dropped from the data section, the Logic PD OMAP3 boards and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores them. Fixes: 38d6b7ebdaee ("spl: Drop bd_info in the data section") Signed-off-by: Adam Ford <aford173@gmail.com>
2020-10-09configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford1-1/+3
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-19ARM: omap3_logic boards: Convert to DM_ETHAdam Ford1-1/+1
With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality. Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board. The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init(). Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-01-20configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL sizeAdam Ford1-0/+2
Currently the DM37 and OMAP35 boards do not boot due to SPL bring too large. SPL doesn't need GPIO, I2C nor MMC sector access since it uses a FAT file system. This patch unifies all these boards to remove these unused features from their defconfigs Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-05configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flashMiquel Raynal1-0/+1
Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal1-1/+1
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-11-08Revert "ARM: omap3_logic/omap35_logic: Enable GPIO in SPL"Adam Ford1-0/+1
The SPL is too tight, and it cannot start any longer. To help reduce the size of SPL, we need to remove some non-critical features. This reverts commit 66063a7c1388fb724e8671b03c529fb5cda992dd. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-23configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-02Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass1-0/+2
This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-27ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo bootingAdam Ford1-1/+0
The SOM-LV and Torpedo boards are very similar, but something happened growing SPL enough to break the Torpedo. The SOM-LV board were not doing alias sequencing during SPL and they continue to work while something broke the Torpedo. This patch disables SPL_DM_SEQ_ALIAS allowing it to boot again. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for TorpedoAdam Ford1-0/+1
The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-18ARM: omap3_logic/omap35_logic: Enable GPIO in SPLAdam Ford1-1/+0
The MMC controller enabled card detect, so this patch enables the GPIO driver in SPL to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-01Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini1-0/+1
Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
2019-04-30configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt1-0/+1
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-30configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-25ARM: omap3_logic: Enable UUIDAdam Ford1-0/+1
Instead of hardcoding the mmcroot to /dev/mmcblkX, use the UUID method. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-20ARM: omap3_logic: Enable SPL booting device treeAdam Ford1-1/+6
With the generic omap3-u-boot.dtsi file available, this patch increased the memory of the various incarnations of the omap3_logic board, and points their respective u-boot.dtsi files to the newly created generic one, and removes the PLATDATA from the board file. These are all done at once because the're all utilizing the same omap3logic.c board file. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-08configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-12ARM: omap3_logic/omap35_logic: Move to DM_USBAdam Ford1-9/+4
The existing config is setup as a gadget but it doesn't use DM_USB. This patch converts all boards to DM_USB, but as host. As host, it is able to mount USB drives and browse them. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-10configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIASJean-Jacques Hiblot1-0/+1
Those platforms need CONFIG_SPL_DM_SEQ_ALIAS because they enable both DM_I2C and SPL_DM. Without CONFIG_SPL_DM_SEQ_ALIAS, it is not possible to get the I2C bus with i2c_get_chip_for_busnum(). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Felix Brack <fb@ltec.ch> Tested-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-11-17ARM: omap3_logic: Remove SPL_OF_CONTROL and OF_PLATDATAAdam Ford1-2/+0
After the recomendation, some testing shows like these are unnecessary. Suggested-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Adam Ford <aford173@gmail.com>
2018-11-16ARM: omap3_logic: Make CONFIG_SYS_TEXT_BASE match README.omap3Adam Ford1-0/+1
README.omap3 has two options. For option 1, CONFIG_SYS_TEXT_BASE is set to 0x80100000. Option 2 lists 0x80008000. The existing value is neither of these, so this patch makes it equivalent to Option 1. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-11-14configs: Migrate and re-enabled CONFIG_CMD_MTDPARTSTom Rini1-0/+1
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-12ARM: omap3_logic: Enable DM_PMIC and DM_REGULATORAdam Ford1-0/+5
Enabling DM_PMIC, DM_REGULATOR_FIXED, and DM_REGULATOR_GPIO gives us the ability to better monitor voltages and enable hardware through the device tree. The TL4030 (TPS65950) is not yet migrated to DM, so this patch only enables the fixed and GPIO controlled regulators. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-12ARM: omap3_logic: Enable PinctrlAdam Ford1-0/+2
The simple pinctrl driver currently available works with the omap3. Enabling this will use the device tree to automatically set the pin-muxing for various drivers. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-12ARM: omap3_logic_defconfig: Convert to DM_SPLAdam Ford1-0/+3
The OF_CONTROL and OF_PLATDATA are not really useful without DM. This patch supports DM_SPL, but it requires manual references both Serial and MMC. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-03configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini1-0/+1
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-14configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-10configs: omap3_logic: Disable NAND ID during SPLAdam Ford1-0/+1
For these boards, the GPMC timings are more determined by processor speed/type than the NAND/PoP memory. This code is never invoked, so disable the config option, so it doesn't take the time to compile it in. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10omap3_logic: Fix CONS_INDEXAdam Ford1-1/+1
The console index for SPL should be 1 not 3 in order to see text during SPL. Fixes: 6f6b7cfa89e5 ("Convert all of CONFIG_CONS_INDEX to Kconfig") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-28configs: omap3_logic: Remove USB Storage and enable CONFIG_BLKAdam Ford1-2/+0
With the pending requirement for CONFIG_BLK, this patch removes the USB_STORAGE option which assumes that DM_USB is enabled, but isn't yet available for the omap2340 musb glue among other issues. Once the USB issues are resolved, a future patch can enable them again. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: configs: omap3_logic: remove Legacy OMAP3 USB driverAdam Ford1-1/+0
Only the MUSB driver is currently supported on the omap3_logic boards. The driver is using the new-musb and not the legacy version, so this patch removes the dead code references. Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-11 01:46:53 +0300