summaryrefslogtreecommitdiff
path: root/configs/pg_wcom_seli8_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-02-17configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-03board/pg_wcom: rework defconfigHolger Brunck1-2/+4
Switch off SCSI related config options to get rid of the board removal warning. We don't use this interface. Also disable UBIFS to decrease the image size, as this is also not used. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-13board/km: move ls102xa boards to environment text filesHolger Brunck1-1/+1
Create a common.env which we can use later on also for other boards. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-06post: Migrate to KconfigTom Rini1-0/+1
We move the existing CONFIG_POST_* functionality over to CFG_POST and then introduce CONFIG_POST to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass1-1/+1
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-16configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_QUIET_TEST to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_FLASH_QUIET_TEST Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_EMPTY_INFO to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_FLASH_EMPTY_INFO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTCOUNT_LE et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_BOOTCOUNT_LE CONFIG_SYS_BOOTCOUNT_BE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06Convert CONFIG_LAYERSCAPE_NS_ACCESS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_LAYERSCAPE_NS_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06nxp: Make board/freescale/common/Kconfig safe to include once in arch/KconfigTom Rini1-0/+1
The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-21configs: set CONFIG_COUNTER_FREQUENCYPeng Fan1-0/+1
Set CONFIG_COUNTER_FREQUENCY according to COUNTER_FREQUENCY in config header file. Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: Re-run migration]
2022-04-08configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01configs: Resync with savedefconfigTom Rini1-8/+8
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARMV7_SECURE_BASE et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_ARMV7_SECURE_BASE CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-10event: Convert misc_init_f() to use eventsSimon Glass1-0/+1
This hook can be implmented using events, for the three boards that actually use it. Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we can just use CONFIG_EVENT to control this. Since sandbox always enables CONFIG_EVENT, we can drop the defconfig lines there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-04Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-04Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-09configs: Resync with savedefconfigTom Rini1-5/+5
Rsync all defconfig files using moveconfig.py and update scripts/pylint.base Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass1-0/+1
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-01configs/expu1/seli8: limit autoboot stop to space keyAleksandar Gerasimovski1-0/+3
Make it in a same way as on the other FOXMC products, this also helps to avoid unwanted stop caused by some terminal servers that are sending junk on the serial line. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01configs: seli8: enable ver envvar for version_stringAleksandar Gerasimovski1-0/+1
This is used by out ESW for reading u-boot build version. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01configs/seli8: enable field fail-safe u-boot updateAleksandar Gerasimovski1-1/+4
Field fail-safe u-boot update for pg-wcom-ls102x designs is introduced with patch 81fb05e. This patch enables already added support by: - Defining default u-boot build as bootpackage (factory) image. - Defining u-boot update image location according to the SELI8 NOR layout. - Extending mtd partitions according defined SELI8 NOR layout. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-12-28Finish conversion of CONFIG_SYS_CLK_FREQ to KconfigTom Rini1-0/+1
In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-13configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09configs: fsl: migrate FMAN/QE specific defines to KconfigRajesh Bhagat1-0/+1
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-01configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_NAND_FSL_ELBC et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_NAND_FSL_ELBC CONFIG_NAND_FSL_IFC Note that a number of PowerPC platforms had previously enabled CONFIG_NAND_FSL_ELBC without CONFIG_MTD_RAW_NAND, and now they no longer enable the option, reducing the size of a few functions. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini1-0/+1
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01nxp: Migrate CONFIG_DDR_CLK_FREQ to KconfigTom Rini1-0/+1
As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini1-0/+1
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-17configs: seli8: set envsize to 0x4000Aleksandar Gerasimovski1-1/+1
During the mainlining of the board this was by mistake set to sector size. Our user space env scripts are expecting envsize of 0x4000, and setting this differently will break our cross-platform compatibility. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-27configs: Resync with savedefconfigTom Rini1-7/+7
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-15board/km: add support for seli8 design based on nxp ls102xAleksandar Gerasimovski1-0/+70
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-24 21:31:43 +0300