summaryrefslogtreecommitdiff
path: root/configs/qemu_arm_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-02-17configs: Resync with savedefconfigTom Rini1-3/+3
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-06arm: qemu: Move GUIDs to the C fileSimon Glass1-0/+1
These are only used in one place, so move them there. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06arm: qemu: Switch to standard bootSimon Glass1-1/+3
Drop use of the distro scripts and use standard boot instead. Enable BOOTDEV_FULL just for convenience, although this does add quite a bit to the size. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-19configs: enable poweroff command on QEMU ARM platformsHeinrich Schuchardt1-0/+1
Enable the sysreset based poweroff command. It invokes PSCI. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_MAX_FLASH_SECT to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini1-0/+2
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-04Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-11nvme: Split out PCI supportMark Kettenis1-1/+1
Apple SoCs have an integrated NVMe controller that isn't connected over a PCIe bus. In preparation for adding support for this NVMe controller, split out the PCI support into its own file. This file is selected through a new CONFIG_NVME_PCI Kconfig option, so do a wholesale replacement of CONFIG_NVME with CONFIG_NVME_PCI. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-01-21configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to KconfigPatrick Delaunay1-0/+2
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries to defconfigs. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> [trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-23fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARDSimon Glass1-1/+0
Use this new Kconfig instead of OF_BOARD, so we know for sure which boards obtain their devicetree from a prior stage. Leave sandbox alone since it does not. Also don't touch xilinx_versal_virt since it does not have a specific TARGET Kconfig. This option implies OF_BOARD for now, but with future work standard passage may be used instead. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add rpi_4_32b and rpi_arm64 to the list of boards converted] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-23arm: qemu: Add a devicetree file for qemu_armSimon Glass1-0/+1
This uses QEMU virt which creates its own devicetree. Add an empty version of this file, so that we can at least build this board when devicetrees are required. Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canaonical.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-21Merge tag 'v2022.01-rc4' into nextTom Rini1-0/+1
Prepare v2022.01-rc4
2021-11-30configs: enable CMD_TPM on QEMU ARMHeinrich Schuchardt1-0/+1
With TPM emulation enabled in u-boot-test-hooks we should also provide the tpm2 command used for the test/py/tests/test_tpm2.py test. One of the Python TPMv2 tests expects sandbox specific values. So disable it on other platforms. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-18arm: qemu: Enable the debug UARTSimon Glass1-0/+5
Enable this to permit early debugging. Due to the way qmeu works, the input clock can be zero and things still work. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-10configs: Enable tpmv2 mmio on qemu for arm/arm64Ilias Apalodimas1-0/+2
A previous commit is adding an MMIO TPMv2 driver. Include in the default qemu arm configs, since we plan on using them on EFI testing Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-01configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini1-0/+1
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-16configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-27configs: Resync with savedefconfigTom Rini1-3/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-06efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=nHeinrich Schuchardt1-1/+0
CONFIG_EFI_GRUB_ARM32 is only needed for architectures with caches that are not managed via CP15 (or for some outdated buggy versions of GRUB). It makes more sense to disable the setting per architecture than per defconfig. Move QEMU's CONFIG_EFI_GRUB_ARM32_WORKAROUND=n from defconfig to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01configs: qemu: enable dfu testingHeinrich Schuchardt1-0/+9
For testing automated updates via dfu and mtd we need the dfu and mtd commands as well as preboot support. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-10configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-29arm: qemu: disable the EFI workaround for older GRUBArd Biesheuvel1-0/+1
The QEMU/mach-virt targeted port of u-boot currently only runs on QEMU under TCG emulation, which does not model the caches at all, and so no users can exist that are relying on the GRUB hack for EFI boot. We will shortly enable support for running under KVM, but the GRUB hack (which disables all caches without doing cache cleaning by VA during ExitBootServices()) is likely to cause more problems than it solves, given that KVM hosts require correct maintenance if they incorporate non-architected system caches. So let's disable the GRUB hack by default on the QEMU/mach-virt port. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-29arm: qemu: enable LPAE on 32-bitArd Biesheuvel1-0/+1
QEMU's mach-virt machine only supports selecting CPU models that implement the virtualization extensions, and are therefore guaranteed to support LPAE as well. Initially, QEMU would not allow emulating these CPUs running in HYP mode (or EL2, for AArch64), but today, it also contains a complete implementation of the virtualization extensions themselves. This means we could be running U-Boot in HYP mode, in which case the LPAE long descriptor page table format is the only format that is supported. If we are not running in HYP mode, we can use either. So let's enable CONFIG_ARMV7_LPAE for qemu_arm_defconfig so that we get the best support for running with the MMU and caches enabled at any privilege level. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-16qemu_arm_defconfig: Enable CONFIG_PCI_INIT_ROvidiu Panait1-2/+1
Replace the "pci enum" preboot sequence with CONFIG_PCI_INIT_R=y. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-01-22configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-07configs: qemu: enable FIT images on qemu_arm(64)_defconfigHeinrich Schuchardt1-0/+5
For testing UEFI FIT images we need FIT image support on QEMU. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-04mtd: rename CONFIG_MTD -> CONFIG_DM_MTDMiquel Raynal1-1/+1
CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-21env: Finish migration of common ENV optionsTom Rini1-0/+3
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-17efi_loader: enable CONFIG_CMD_NVEDIT_EFI on QEMUHeinrich Schuchardt1-0/+1
To reduce the default image size CONFIG_CMD_NVEDIT_EFI was disabled by default. Re-enable it on the QEMU platforms supporting the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-02Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass1-0/+2
This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-30configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-08configs: Resync with savedefconfigTom Rini1-7/+7
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-12qemu-arm: Add persistent environment supportSumit Garg1-0/+7
Currently on qemu-arm platforms environment is kept in RAM. Instead use pflash device 1 to provide persistent environment support across device reset. Also (optionally) provide support for persistent environment across qemu machine OFF/ON using following instructions: - Create envstore.img using qemu-img: qemu-img create -f raw envstore.img 64M - Add a pflash drive parameter to the command line: -drive if=pflash,format=raw,index=1,file=envstore.img Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2018-11-14arm: qemu: Add a Kconfig in the board directoryBin Meng1-1/+0
This adds a Kconfig file in the board directory, so that some board-specific options can be specified there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14configs: Resync with savedefconfigTom Rini1-2/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-23efi_selftest: test qemu-arm(64)_defconfigHeinrich Schuchardt1-0/+1
We should run the EFI selftest on both a 32bit and a 64bit ARM platform on Travis to catch possible errors. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini1-0/+1
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-19ARM: qemu-arm: enable RTCHeinrich Schuchardt1-0/+2
QEMU provides an emulated ARM AMBA PrimeCell PL031 RTC. The patch sets the base address in the board include file according to the definition in hw/arm/virt.c of the QEMU source. It defines the Kconfig option for the existing driver, and enables the RTC driver in qemu_arm64_defconfig and qemu_arm_defconfig as well as the date command. We need an RTC to provide the GetTime() runtime service in the UEFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Tested-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2018-02-11configs: Migrate CONFIG_SYS_TEXT_BASETom Rini1-0/+1
On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-19ARM: qemu-arm: Add support for AArch64Tuomas Tynkkynen1-0/+1
This adds support for '-machine virt' on AArch64. This is rather simple: we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig symbols, provide the ARMv8 memory map from the board file and add a new defconfig based on the 32-bit defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-12-13ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen1-0/+1
And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-11cmd: Toggle the default value of CONFIG_CMD_IMLSTuomas Tynkkynen1-1/+0
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-24 20:01:03 +0300