summaryrefslogtreecommitdiff
path: root/configs/sandbox_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-07-16image: Rename CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORTSimon Glass1-1/+1
Drop the ENABLE and SUPPORT parts of this, which are redundant. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-08configs: Remove unnecessary CONFIG_DM_PCI_COMPAT=yTom Rini1-1/+0
The following boards no longer need CONFIG_DM_PCI_COMPAT enabled, so remove that. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-06sandbox: cros-ec: Add tests for the Chromium OS EC PWM driverAlper Nebi Yasak1-0/+1
This patch adds a limited pulse-width modulator to sandbox's Chromium OS Embedded Controller emulation. The emulated PWM device supports multiple channels but can only set a duty cycle for each, as the actual EC doesn't expose any functionality or information other than that. Though the EC supports specifying the PWM channel by its type (e.g. display backlight, keyboard backlight), this is not implemented in the emulation as nothing in U-Boot uses this type specification. This emulated PWM device is then used to test the Chromium OS PWM driver in sandbox. Adding the required device node to the sandbox test device-tree unfortunately makes it the first PWM device, so this also touches some other tests to make sure they still use the sandbox PWM. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-28Merge tag 'v2021.07-rc5' into nextTom Rini1-1/+1
Prepare v2021.07-rc5 # gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # configs/am64x_evm_r5_defconfig
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-17test: Add K210 PLL tests to sandbox defconfigsSean Anderson1-0/+2
This adds the unit test for the K210 PLL to the sandbox defconfigs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-08sandbox: log: Avoid build error with !CONFIG_LOGSimon Glass1-0/+1
The pr_cont_test.c test requires CONFIG_LOG since it directly accesses fields in global_data that require it. Move the test into the CONFIG_LOG condition to avoid build errors. Enable CONFIG_LOG on sandbox (not sandbox_spl, etc.) so that we still run this test. This requires resyncing of the configs. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-05-04sandbox: add test of CONFIG_ENV_IMPORT_FDTRasmus Villemoes1-0/+1
Check that a variable defined in /config/environment is found in the run-time environment, and that clearing fdt_env_path from within that node works. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [trini: Conditionalize the test being linked in] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-04test: Add gpio-sysinfo testSean Anderson1-0/+1
This adds a test for the gpio-sysinfo driver. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-27configs: Resync with savedefconfigTom Rini1-3/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-20Add support for stack-protectorJoel Peshkin1-0/+2
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20sandbox: enable IRQ using select for sandbox architectureWasim Khan1-1/+0
Enable IRQ using select for sandbox architecture. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-18Merge tag 'ti-v2021.07-rc1' of ↵Tom Rini1-0/+1
https://source.denx.de/u-boot/custodians/u-boot-ti - Support for pinmux status command on beaglebone - Updates for MMC speed modes for J721e-evm - Fix MMC booting on omap35_logic_somlv board
2021-04-13firmware: scmi: sandbox test for voltage regulatorEtienne Carriere1-0/+1
Implement sandbox regulator devices for SCMI voltage domains and test them in DM scmi tests. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12test: pinmux: add test for 'pinctrl-single' driverDario Binacchi1-0/+1
The test adds two pinmux nodes to the device tree, one to test when a register changes only one pin's mux (pinctrl-single,pins), and the other to test when more than one pin's mux is changed (pinctrl-single,bits). This required replacing the controller's register access functions when the driver is used on sandbox. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-06Convert CONFIG_MISC_INIT_F to KconfigSimon Glass1-0/+1
This converts the following to Kconfig: CONFIG_MISC_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-02-26test: dm: Add test for fastboot mmc partition namingSean Anderson1-0/+2
This test verifies the mapping between fastboot partitions and partitions as understood by U-Boot. It also tests the creation of GPT partitions, though that is not the primary goal. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-22Merge tag 'u-boot-amlogic-20210222' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - adds adc-keys button driver - fix meson-saradc driver to get reference voltage - add adc-keys test for sandbox - enable adc-keys for VIM3 & VIM3L boards - fix button.h build
2021-02-18dm: test: Add test case for dev->dma_offsetNicolas Saenz Julienne1-0/+1
Add test to validate dev->dma_offset is properly set on devices. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18test: add a simple test for the adc-keys button driverMarek Szyprowski1-0/+1
Add adc-keys device to the sandbox/test.dts and connect it to the channel #3 of the sandbox_adc driver. The default values sampled by sandbox_adc driver determines that button3 and button4 are released and button5 is pressed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-29configs: Resync with savedefconfigTom Rini1-8/+6
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-18cmd: Add a pwm commandPragnesh Patel1-0/+1
Add the command "pwm" for controlling the pwm channels. This command provides pwm invert/config/enable/disable functionalities via PWM uclass drivers Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-03sandbox: enable capsule update for testingAKASHI Takahiro1-0/+6
Add more configuration options to allow for efi capsule update on sandbox. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-11-30configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-06board: Rename uclass to sysinfoSimon Glass1-2/+2
This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-29configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-28test: mux-cmd: Add tests for the 'mux' commandPratyush Yadav1-0/+1
Tests tests run the three mux subcommands: list, select, and deselect, and verify that the commands do what we expect. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28test: Add tests for the multiplexer frameworkJean-Jacques Hiblot1-0/+2
Provide tests to check the behavior of the multiplexer framework. Two sets of tests are added. One is using an emulated multiplexer driver that can be used to test basic functionality like select, deselect, etc. The other is using the mmio mux which adds tests specific to it. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay1-0/+1
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14test: Add PStore command testsFrédéric Danis1-0/+2
Add PStore command to sandbox and sandbox64 defconfigs. Add test checking: - 'pstore display' of all records - 'pstore display' only the 2nd dump record - 'pstore save' of all records Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> [trini: Adjust to always load files from source directory] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2020-10-05configs: Resync with savedefconfigTom Rini1-3/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-01Merge branch '2020-09-30-assorted-network-improvements' into nextTom Rini1-0/+1
- Generic UDP framework - TFTP fixes - dwc_eth_qos, smc911x, smc911x and mscc phy fixes
2020-09-30sandbox: enable support of generic udp protocolPhilippe Reynes1-0/+1
This commit enable the support of the generic udp protocol. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: smci: sandbox test for SCMI reset controllersEtienne Carriere1-0/+1
Add tests for SCMI reset controllers. A test device driver sandbox-scmi_devices.c is used to get reset resources, allowing further resets manipulation. Change sandbox-smci_agent to emulate 1 reset controller exposed through an agent. Add DM test scmi_resets to test this reset controller. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: scmi: sandbox test for SCMI clocksEtienne Carriere1-0/+1
Add tests for SCMI clocks. A test device driver sandbox-scmi_devices.c is used to get clock resources, allowing further clock manipulation. Change sandbox-smci_agent to emulate 3 clocks exposed through 2 agents. Add DM test scmi_clocks to test these 3 clocks. Update DM test sandbox_scmi_agent with load/remove test sequences factorized by {load|remove}_sandbox_scmi_test_devices() helper functions. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: add SCMI agent uclassEtienne Carriere1-0/+2
This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-27configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-25pci: pci-uclass: Add multi entry support for memory regionsSuneel Garapati1-0/+1
Enable PCI memory regions in ranges property to be of multiple entry. This helps to add support for SoC's like OcteonTX/TX2 where every peripheral is on PCI bus. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass1-0/+1
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-20i2c: eeprom: Use reg property instead of offset and sizeMichal Simek1-0/+1
Remove adhoc dt binding for fixed-partition definition for i2c eeprom. fixed-partition are using reg property instead of offset/size pair. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-10configs: Resync with savedefconfigTom Rini1-4/+4
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08test/py: Add tests for the SquashFS commandsJoao Marcos Costa1-0/+1
Add Python scripts to test 'ls' and 'load' commands. The scripts generate a SquashFS image and clean the directory after the assertions, or if an exception is raised. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-08cmd: Update the memory-search commandSimon Glass1-0/+1
Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-31test: sandbox: add test for erase commandPatrick Delaunay1-0/+1
Add test for the erase command tested on ENV in EXT4. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31configs: sandbox: activate command env select and env loadPatrick Delaunay1-0/+2
Add support of environment location with the new env command: 'env select' and 'env load' The ENV backend is selected by priority order - 0 = "nowhere" (default at boot) - 1 = "EXT4" To test EXT4 env support, this backend is selected by name: > env select EXT4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31configs: sandbox: activate env in ext4 supportPatrick Delaunay1-0/+4
Activate ENV in EXT4 support in sandbox. The sandbox behavior don't change; the default environment with the nowhere backend (CONFIG_ENV_IS_NOWHERE)is still used: the weak function env_get_location() return ENVL_NOWHERE for priority 0. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-29sandbox: enable buttonPhilippe Reynes1-0/+2
Enable the support of button (driver and command) on sandbox. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-29sandbox: enable FIT cipher support in defconfigPatrick Oppenlander1-0/+1
Linux distributions generally use the "make defconfig && make tools-all" recipe to generate a uboot-tools (or similar) package. This patch enables FIT cipher support in the default mkimage build. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-5/+3
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>