summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2020-09-24configs: P1010RDB: Enable DM_ETH configHou Zhiqiang16-0/+32
Enable the DM_ETH and DM_MDIO config. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1020RDB: Enable DM_ETH configHou Zhiqiang12-0/+36
Enable the DM_ETH and DM_MDIO config. On P1020RDB, the eTSEC1 is connecting with a switch VSC7385, so also enable the fixed PHY support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSNVladimir Oltean9-0/+9
The tsec driver now requires DM_MDIO when DM_ETH is enabled. To avoid build errors, enable DM_MDIO in these boards' configs before we actually add DM_MDIO support to tsec. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1010RDB: Enable eSPI controller and SPI flash DM driverHou Zhiqiang16-0/+32
Enable the DM_SPI and DM_SPI_FLASH in P1010RDB defconfigs except SECBOOT defconfigs. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T4240RDB: Enable ESPI driverXiaowei Bao2-0/+4
Enable the DM ESPI driver in T4240RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T2080RDB: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in T2080RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T1042D4RDB: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in T1042D4RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T1024RDB: Enable ESPI driverXiaowei Bao5-0/+10
Enable the DM ESPI driver in T1024RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P5040DS: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in P5040DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P4080DS: Enable ESPI driverXiaowei Bao3-0/+6
Enable the DM ESPI driver in P4080DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P3041DS: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in P3041DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P2041RDB: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in P2041RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P2020RDB: Enable ESPI driverXiaowei Bao8-0/+16
Enable the DM ESPI driver in P2020RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1020RDB: Enable ESPI driverXiaowei Bao12-0/+24
Enable the DM ESPI driver in P1020RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: enable espi device module in T2080QDSChuanhua Han6-0/+12
This patch is to enable espi DM for T2080QDS in uboot Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-21Merge branch 'master' into nextTom Rini15-4/+29
Merge in v2020.10-rc5
2020-09-21configs: Resync with savedefconfigTom Rini4-6/+6
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-18configs: bcmstb: Disable networking supportThomas Fitzsimmons2-0/+2
Silence the "Driver Model for Ethernet drivers" migration warning for the bcm7445 and bcm7260 ports, neither of which supports networking yet. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-18board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfigSoeren Moch1-1/+0
This is not required for sysboot (we defined fdtfile), let's save a few bytes in the binary image without these variables. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker1-1/+1
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker1-1/+1
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17mx6qsabrelite: increase the environment offsetDenis Pynkin1-1/+1
The size of the binary created with the default U-boot config is much greater than the default offset for environment `0x60000`. In case if that binary is used for booting via MMC it is overlapped with the environment stored on MMC. This leads to U-Boot corruption while saving environment with `saveenv` command and non-bootable SabreLite board. The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in commit a09fea1 but did not count in the change to `0xC0000` if option `CONFIG_ENV_IS_IN_MMC` is used. The offset is also used for variant with environment saving onto SPI NOR flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the U-Boot binary flashed on SPI NOR is also corrupted after environment saving with the original 0x60000 offset. Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-17colibri_imx7: use preboot for fdtfile evaluationIgor Opaniuk2-0/+4
Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: a62c60610f("colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_vf: use preboot for fdtfile evaluationIgor Opaniuk1-0/+2
Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: 304042c1f3("colibri_vf: set fdtfile for distroboot") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx6ull: use preboot for fdtfile evaluationIgor Opaniuk1-0/+2
Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: board: 31b1e17f44("toradex: add Colibri iMX6ULL support") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17mpc83xx, keymile boards: enable DM_ETH and add DTSHeiko Schocher8-32/+53
enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-09-16rockchip: rv1108: enable board early initKever Yang2-0/+2
Enable board early init callback to init board specific hardware. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-15configs: Add spiboot support for am335xFaiz Abbas1-0/+93
am335x internal SRAM is too small to support the addition of SPI bootmode to the default defconfig. Add a separate spiboot_defconfig Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-09-15configs: j7200_evm_r5: Enable FS_LOADERSuman Anna1-0/+1
Enable the FS_LOADER and associated configs in the j7200_evm_r5_defconfig so that the R5 SPL can support the loading of firmware files from a boot media/file system. Signed-off-by: Suman Anna <s-anna@ti.com>
2020-09-15configs: j7200_evm_a72: Enhance bootcmd to start remoteprocsSuman Anna1-1/+1
The A72 U-boot can support early booting of any of the Main or MCU R5F remote processors from U-boot prompt to achieve various system usecases before booting the Linux kernel. Update the default BOOTCOMMAND to provide an automatic and easier way to start various remote processors through added environment variables. Signed-off-by: Suman Anna <s-anna@ti.com>
2020-09-15configs: j7200_evm_a72: Enable R5F remoteproc driverSuman Anna1-0/+2
The J7200 SoCs has two R5F sub-systems. Enable the TI K3 R5F remoteproc driver and the remoteproc command options to allow these R5F processors to be booted from A72 U-Boot. The Kconfigs are added using savedefconfig. Signed-off-by: Suman Anna <s-anna@ti.com>
2020-09-15configs: j7200_evm_*_defconfig: Enable HyperFlash boot related configsVignesh Raghavendra2-0/+16
Enable configs required to support HyperFlash boot and detection of onboard mux switch for HyperFlash selection Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-09-10configs: odroid-c4: update for HDMI output background & USB keyboardAnand Moon1-0/+4
Enable options SYS_WHITE_ON_BLACK to permit HDMI background screen from white to back, also enable USB_KEYBOARD. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-10configs: odroid-n2: update for HDMI output & USB keyboardAnand Moon1-0/+9
Enable options to permit HDMI output on Odroid-N2 G12B boards. Enable VPU Power Domain. Enable USB_KEYBOARD. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-08config: Enable USB Keyboard suuport on RPi4 32 bitMatthias Brugger1-0/+1
Supporting USB keyboards out of the box is both handy for development and production. Notably if u-boot is used to boot into GRUB. This patch adds USB keyboard support for 32 bit RPi4 config. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-09-07configs: Resync with savedefconfigTom Rini12-17/+5
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-04defconfig: espressobin: Add support for ISSI SPI flashesKonstantin Porotchkin1-0/+1
Enable support of ISSI SPI flashes found on EspressoBIN boards Change-Id: I6de61c48f108fb4f410f321b9db45887d23212e5 Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/61455 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Stefan Chulski <stefanc@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-04defconfig: espressobin: Include support for Gigadevice SPIKonstantin Porotchkin1-0/+1
Include support for CONFIG_SPI_FLASH_GIGADEVICE for supporting newly produces EspressoBin boards (v7) Change-Id: I5d4b972cbe2ee5a9d52ce9908794ad4e1b59ee3b Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/61236 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-01configs: qemu: enable dfu testingHeinrich Schuchardt2-0/+18
For testing automated updates via dfu and mtd we need the dfu and mtd commands as well as preboot support. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-31arm: mvebu: Espressobin: Setup MTD partitions when booting kernelPali Rohár1-0/+1
Due to different partition layouts in different U-Boot versions, DTS for Espressobin in Linux does not contain any definition of MTD partitions. See commit https://git.kernel.org/stable/c/00954566464a4 for more details. This patch via ft_board_setup() hook fills current partition layout used by U-Boot, so booted kernel would see correct MTD partitions layout. U-Boot env partition is calculated from CONFIG_ENV_OFFSET option. First partition contains secure firmware, ARM trusted firmware and U-Boot with checksums. So it is not possible to replace just one image (e.g. U-Boot) without updating other parts where is stored checksum of U-Boot. Therefore there is no extra partition defined for U-Boot and first partition is called just 'firmware'. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-31arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-BootPali Rohár1-1/+1
Espressobin board comes with Marvell's U-Boot version where U-Boot env is stored in SPI at offset 0x3F0000. This patch changes env offset in Espressobin defconfig file to match Marvell's U-Boot version. Users who want to use previous or different env offset can still change it in .config file when compiling U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-31arm: dts: a37x0: enable sd card support on espressobinWilson Ding1-0/+1
Enabled SDIO slot 0 (south bridge) for SD card on Espressobin board. Change-Id: I51a2debf9fba276b9c4a2bc6da91328d47f443e3 Signed-off-by: Wilson Ding <dingwei@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/60945 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> [pali: Define cd-gpios and enable CONFIG_DM_REGULATOR_GPIO] Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-31arm: mvebu: Espressobin: Enable CONFIG_MVNETAPali Rohár1-0/+1
Espressobin uses mvneta ethernet driver. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-27cmd: Kconfig: Change dependency for CMD_ADCMichal Simek11-0/+11
CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-27configs: Resync with savedefconfigTom Rini8-17/+15
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-26Merge tag 'u-boot-imx-20200825' of ↵Tom Rini103-35/+136
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - mx6: SOCs user selectable Fix for imx6q_logic Some DM conversion - mx7: introduce secondary boot device Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/720918010 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini7-0/+498
- Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
2020-08-25Merge tag 'u-boot-rockchip-20200820' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3399 evb sdcard support - Fix for SPL_LED support
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-0/+10
- Sipeed Maix support S-mode. - Provide command sbi. - Use fdtdec_get_addr_size_auto_parent to get fu540 cache base address. - Fix a compiler error with CONFIG_SPL_SMP=n. - Fix sifive ram driver 32 compiler warnings. - Fix kendryte/pll.h redefine nop() warning.
2020-08-25x86: qemu-x86_defconfig: Increase CONFIG_SYS_MALLOC_F_LENStefan Roese1-0/+1
With the upcoming increase of the malloc area in U-Boot ("pci: pci-uclass: Dynamically allocate the PCI regions"), the CI QEMU x86 test fails: U-Boot 2020.10-rc2-g0a668f6d38 (Aug 25 2020 - 06:12:51 +0000) alloc space exhausted Error binding driver 'cpu_qemu': -12 Some drivers failed to bind alloc space exhausted initcall sequence fff6a760 failed at call fff13b3d (err=-19) This patch now increases CONFIG_SYS_MALLOC_F_LEN to 0x1000, which is already used on qemu-x86_64_defconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 02:00:16 +0300