summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 ↵Tom Rini2-3/+12
into next - Enhance the 'zboot' command to be more like 'bootm' with sub-commands - The last series of ACPI core changes for programmatic generation of ACPI tables - Add all required ACPI tables for ApolloLake and enable ACPIGEN on Chromebook Coral - A feature minor enhancements to the 'hob' command - Intel edison: Support for writing an xFSTK image via binman
2020-09-25x86: coral: Update config and device tree for ACPISimon Glass1-2/+9
Enable new features and provide require device-tree config so that U-Boot produces the correct ACPI tables on Coral. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25x86: apl: Generate CPU tablesSimon Glass1-0/+1
Add ACPI generation to the APL CPU driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25x86: acpi: Add a common routine to write WiFi infoSimon Glass1-0/+1
Intel WiFi chips can use a common routine to write the information needed by linux. Add an implementation of this. Enable it for coral. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25x86: link: Allow more space for U-BootSimon Glass1-1/+1
The extra ACPI code increases U-Boot above it current size limit. Move the start earlier to provide space. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-24Merge tag 'xilinx-for-v2021.01' of ↵Tom Rini11-12/+22
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.01 arm64: - Support for bigger U-Boot images compiled with PIE microblaze: - Extend support for LE/BE systems zynqmp: - Refactor silicon ID detection code with using firmware interface - Add support for saving variables based on bootmode zynqmp-r5: - Fix MPU mapping and defconfig setting. xilinx: - Minor driver changes: names alignment - Enable UBIFS - Minor DT and macros fixes - Fix boot with appended DT - Fix distro boot cmd: - pxe: Add fixing for platforms with manual relocation support clk: - fixed_rate: Add DM flag to support early boot on r5 fpga: - zynqmppl: Use only firmware interface and enable SPL build serial: - uartlite: Enable for ARM systems and support endians mmc: - zynq: Fix indentation net: - gem: Support for multiple phys - emac: Fix 64bit support and enable it for arm64 kconfig: - Setup default values for Xilinx platforms - Fix dependecies for Xilinx drivers - Source board Kconfig only when platform is enabled - Fix FPGA Kconfig entry with SPL - Change some defconfig values bindings: - Add binding doc for vsc8531
2020-09-24configs: powerpc: add usb (host) mass storage supportRan Wang48-0/+48
commit 0cfccb54014b ("configs: Resync with savedefconfig") removed CONFIG_USB_STORAGE from some powerpc platforms' defconfig files, whicih would block the use case of system loading rootfs from USB drives, add them back. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P5040DS secure boot configsPriyanka Jain2-123/+0
Remove NXP powerpc P5040DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P5020DS board supportPriyanka Jain7-410/+0
Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24powerpc:Remove P4080DS secure boot configsPriyanka Jain1-59/+0
Remove NXP powerpc P4080DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P3041DS secure boot configsPriyanka Jain2-122/+0
Remove NXP powerpc P3041DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1024RDB board supportPriyanka Jain5-348/+0
Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1021RDB board supportPriyanka Jain8-630/+0
Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020MBG board supportPriyanka Jain4-248/+0
Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020UTM board supportPriyanka Jain4-248/+0
Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1025RDB board supportPriyanka Jain5-360/+0
Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P1010RDB secure boot configsPriyanka Jain12-767/+0
Remove NXP powerpc P1010RDB secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove p1023rdb board supportPriyanka Jain1-50/+0
Remove NXP powerpc p1023rdb board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P2020RDB: Enable DM_ETH configHou Zhiqiang8-0/+24
Enable the DM_ETH and DM_MDIO config. On P2020RDB, the eTSEC1 is connecting with a switch VSC7385, so also enable the fixed PHY support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1010RDB: Enable DM_ETH configHou Zhiqiang16-0/+32
Enable the DM_ETH and DM_MDIO config. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1020RDB: Enable DM_ETH configHou Zhiqiang12-0/+36
Enable the DM_ETH and DM_MDIO config. On P1020RDB, the eTSEC1 is connecting with a switch VSC7385, so also enable the fixed PHY support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSNVladimir Oltean9-0/+9
The tsec driver now requires DM_MDIO when DM_ETH is enabled. To avoid build errors, enable DM_MDIO in these boards' configs before we actually add DM_MDIO support to tsec. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1010RDB: Enable eSPI controller and SPI flash DM driverHou Zhiqiang16-0/+32
Enable the DM_SPI and DM_SPI_FLASH in P1010RDB defconfigs except SECBOOT defconfigs. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T4240RDB: Enable ESPI driverXiaowei Bao2-0/+4
Enable the DM ESPI driver in T4240RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T2080RDB: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in T2080RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T1042D4RDB: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in T1042D4RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T1024RDB: Enable ESPI driverXiaowei Bao5-0/+10
Enable the DM ESPI driver in T1024RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P5040DS: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in P5040DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P4080DS: Enable ESPI driverXiaowei Bao3-0/+6
Enable the DM ESPI driver in P4080DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P3041DS: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in P3041DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P2041RDB: Enable ESPI driverXiaowei Bao4-0/+8
Enable the DM ESPI driver in P2041RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P2020RDB: Enable ESPI driverXiaowei Bao8-0/+16
Enable the DM ESPI driver in P2020RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1020RDB: Enable ESPI driverXiaowei Bao12-0/+24
Enable the DM ESPI driver in P1020RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: enable espi device module in T2080QDSChuanhua Han6-0/+12
This patch is to enable espi DM for T2080QDS in uboot Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-23xilinx: zynqmp-r5: Increase amount of MALLOC spaceMichal Simek1-0/+1
There is not enough space for early allocation. That's why increase it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: r5: Disable EFI loaderMichal Simek1-0/+1
Xilinx ZynqMP R5 configuration is quite minimal and there is no reason to enable EFI for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: Disable CONFIG_EFI_LOADER_BOUNCE_BUFFER for ZynqMP/VersalMichal Simek2-2/+0
Both SOCs shouldn't have any problem with 64bit dma accesses. Also with PIE enabled when u-boot is placed above 4GB without any memory mapped below 4GB address space efi_memory_init() call is failing due to missing memory node. For this two reason disable this option for ZynqMP and Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGAMichal Simek2-2/+2
The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile and zynqmp.c to simplify if/endif logic in zynqmp.c. This change is mostly done to be able to use CONFIG_IS_ENABLED macro and obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync. And removing one line from Topic Miami boards which is not needed because symbol is not enabled via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-23ARM: zynqmp: Fix SPL_DM_SPI dependenciesMichal Simek5-5/+0
Add missing dependencies for DM_SPI_FLASH. Kconfig reports it as: WARNING: unmet direct dependencies detected for SPL_DM_SPI_FLASH Depends on [n]: SPL [=n] && SPL_DM [=n] Selected by [y]: - ARCH_ZYNQMP [=y] && <choice> && SPL_DM_SPI [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23arm64: versal: Generate position-independent pre-relocation codeMichal Simek1-0/+1
Enable position independent pre-relocation to let users options to put u-boot to different locations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: zynqmp: Add support for saving variablesMichal Simek1-0/+4
Enabling saving variables to MMC(FAT), NAND, SPI based on primary bootmode. Maybe that logic can be tuned for more complicated use cases and better tested for different bootmodes. Tested on zcu104 to SD(FAT) and JTAG(NOWHERE). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: versal: Enable AXI ethernet driverAshok Reddy Soma2-2/+2
Enable AXI ethernet driver for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23nand: Kconfig: Change dependency for NAND_ARASANMichal Simek3-0/+3
NAND_ARASAN selecting DM_MTD uunconditionally. Driver can be enabled with !DM that's why Kconfig it showing it as error: WARNING: unmet direct dependencies detected for DM_MTD Depends on [n]: DM [=n] Selected by [y]: - NAND_ARASAN [=y] && MTD_RAW_NAND [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-23xilinx: Enable uartlite driver for Versal/ZynqMPT Karthik Reddy2-0/+2
Add CONFIG_XILINX_UARTLITE config to versal/zynqmp defconfig to enable uartlite driver support by default. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23configs: xilinx: Enable configs required for ubifsAshok Reddy Soma2-0/+5
Enable required configs for using ubifs in uboot. UBIFS testing procedure from u-boot: Let's say we have two partitions in dt as below and want to format partition1 "images" with ubifs. partition@0 { label = "boot"; reg = <0x0 0x1000000>; }; partition@1 { label = "images"; reg = <0x1000000 0x7000000>; }; We will format the partition from linux and copy some files and access from uboot later. First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. this is required as ubifs expects min LEB size as 15*1024 bytes. Use below commands in linux to format "images" partition with ubifs. ubiformat /dev/mtd1 ubiattach /dev/ubi_ctrl -m 1 ubimkvol /dev/ubi0 -N images -m mount -t ubifs ubi0:images /mnt We can copy files to /mnt and unmount it. To access this ubifs partition from uboot, run below commands. (Don't forget to probe device before, e.g. sf probe 0 0 0) setenv mtdids "nor0=nor0" setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)" ubi part images ubifsmount ubi0:images make sure we match "mtdparts" to whatever is given in dt w.r.t partition sizes. "mtdparts" command will list the mtd partitions in u-boot. Once ubifs is mounted, we can use "ubifsls" to list the files in that partition and use "ubifsload <addr> <filename>" to load files from ubifs partition to DDR. Reading information about mtd layout from DT is not supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: kconfig: Move sourcing of board Kconfig to mach foldersMichal Simek1-1/+1
Do not source xilinx board Kconfig by other boards. These configs should be available only when Xilinx platforms are selected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-21Merge branch 'master' into nextTom Rini15-4/+29
Merge in v2020.10-rc5
2020-09-21configs: Resync with savedefconfigTom Rini4-6/+6
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-18configs: bcmstb: Disable networking supportThomas Fitzsimmons2-0/+2
Silence the "Driver Model for Ethernet drivers" migration warning for the bcm7445 and bcm7260 ports, neither of which supports networking yet. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-18board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfigSoeren Moch1-1/+0
This is not required for sysboot (we defined fdtfile), let's save a few bytes in the binary image without these variables. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 04:57:38 +0300