summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-08-16configs: Resync with savedefconfigTom Rini37-41/+6
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-16test: dm: Add test for ECDSA UCLASS supportAlexandru Gagniuc1-0/+2
This test verifies that ECDSA_UCLASS is implemented, and that ecdsa_verify() works as expected. The definition of "expected" is "does not find a device, and returns -ENODEV". The lack of a hardware-independent ECDSA implementation prevents us from having one in the sandbox, for now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16ARM: stm32: Set environment sector size to 4k on DHSOMMarek Vasut2-2/+2
The DHSOM SPI NOR is using 4k erase blocks, make use of it and define the default environment sector size to 4k. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: add defconfig for trusted boot with FIPPatrick Delaunay1-0/+158
Add TF-A FIP support for trusted boot on STM32MP15x, when STM32MP15x_STM32IMAGE is not activated. With FIP support the SSBL partition is named "fip" and its size is 4MB, so the ENV partition name in device tree (for SD card or eMMC) or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND) need to be modified. With FIP the TEE MTD partitions are removed because the OP-TEE binray are included in the FIP containers. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: add config for STM32IMAGE supportPatrick Delaunay1-0/+1
By default for trusted boot with TF-A, U-Boot (u-boot-nodtb) is located in FIP container with its device tree and with the secure monitor (provided by TF-A or OP-TEE). The FIP file is loaded by TF-A BL2 and each components is extracted at the final location. This patch add CONFIG_STM32MP15x_STM32IMAGE to request the STM32 image generation for SOC STM32MP15x when FIP container is not used (u-boot.stm32 is loaded by TF-A as done previously to keep the backward compatibility). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-13Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini1-1/+1
- Enable SeaBIOS support for Crown Bay - Update SeaBIOS build instructions in the x86 doc - Enable CONFIG_SPI_FLASH_SMART_HWCAPS for Crown Bay
2021-08-13x86: crownbay: Enable CONFIG_SPI_FLASH_SMART_HWCAPSBin Meng1-1/+0
Now that the spi-nor fix has been made in u-boot/master via: commit 87e7219f9c6a ("mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()") enable CONFIG_SPI_FLASH_SMART_HWCAPS on Intel Crown Bay again. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-13x86: crownbay: Enable SeaBIOS supportBin Meng1-0/+1
Enable SeaBIOS support for any kernel that requires legacy BIOS services. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-12Merge tag 'u-boot-rockchip-20210812' of ↵Tom Rini1-0/+2
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Rockchip SFC driver support; - DTS sync from kernel; - emmc hs400 support for rk3399; - Fix for spinore bootdevice and MMC boot order;
2021-08-11Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-1/+4
- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony) - mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel) - mvebu: sata_mv: Fix HDD identication during cold start (Tony) - a37xx: pci: Fix handling PIO config error responses (Pavel) - Other minor misc changes and board maintainer updates
2021-08-11Merge tag 'u-boot-amlogic-20210810' of ↵Tom Rini3-1/+13
https://source.denx.de/u-boot/custodians/u-boot-amlogic - odroid-n2: fix fdtfile suffix for n2-plus - sei610 & meson64_android cleanups to prepare android 11 boot support - use Android BCB mechanism for reboot reason instead of HW reboot flag - Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
2021-08-11rockchip: config: evb-rk3399: add hs400 and SDMA supportYifeng Zhao1-0/+2
This enable hs400 and SDMA support for emmc on evb-rk3399. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configsTony Dinh1-1/+4
Add DM_ETH, SATA_MV and associated configs to goflexhome_defconfig. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-10configs: Resync with savedefconfigTom Rini97-199/+154
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-10configs: sei510/610: android bootflow via abootimgGuillaume La Roque2-0/+10
Activate the following Kconfig options: * AVB for Android Verified Boot support * ADTIMG for merging DTBOs * ABOOTIMG for extracting Android boot image Also rework the partitioning tables: - add a misc partition to handle BCB messages - add a dtbo partition to store various DTBOs - add a vbmeta partition for AVB hashes - Merge vendor and system into the "super" partition Note: avb support is disables by default. To activate it: => setenv force_avb 1; => saveenv; Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-08-10board: amlogic: odroid-n2: fix fdtfile suffix for n2-plusChristian Hewitt1-1/+1
The N2+ dtb is meson-g12b-odroid-n2-plus.dtb, not n2_plus, so correct the suffix provided in the board file. Also align the board ident string shown during boot to match. Fixes: 8bc780106c13 ("board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-08-09Merge tag 'u-boot-imx-20210809' of ↵Tom Rini7-6/+129
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09arm: imx: add i.MX8ULP EVK supportPeng Fan1-0/+103
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09board: gateworks: venice: add board model to dtTim Harvey1-0/+1
Add the specific board model from EEPROM config to the device-tree to make it easier to access from Linux userspace. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09configs: imx8mm_venice_defconfig: remove unused SPL featuresTim Harvey1-1/+0
remove unused SPL features to shink the size of the SPL which otherwise would no longer fit into IMX8M Mini OCRAM. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09mx28evk: Convert to driver modelFabio Estevam1-4/+14
Make the conversion to driver model as it is mandatory. Successfully tested booting Linux from the SD card. Dropped support for networking and splash screen as these need to be properly converted to DM and tested. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09mx7dsabresd: Select CONFIG_IMX_HABFabio Estevam1-0/+1
Select CONFIG_IMX_HAB so that the "hab_status" command becomes available, which is useful for checking if the chip has been correctly setup to run in secure boot mode. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-08-09board: gateworks: venice: add imx8mm-gw7902 supportTim Harvey1-1/+1
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC Do the following to add support for it: - add dts - add PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09imx: ventana: replace hard-coded LED config with dt based configTim Harvey3-0/+9
Use device-tree LED config instead of hard-coded board-specific config. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-08ARM: renesas: Set CONFIG_SYS_TEXT_BASE=0x0 on R-Car Gen3Marek Vasut1-1/+1
Since R-Car Gen3 already enables position independent build, also set CONFIG_SYS_TEXT_BASE=0x0 to finalize the switch. This is possible since 534f0fbd65 ("arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y") fixed current env_get_char() crash with CONFIG_SYS_TEXT_BASE=0x0 . This change permits us to start U-Boot from any location in DRAM instead of specific TEXT_BASE. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-08-08ARM: rmobile: Remove default bootargsMarek Vasut7-7/+0
The bootargs in all those boards are a copy of initial example bootargs, just remove those as they make little sense in most configurations. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-08-03Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini9-9/+2
2021-08-03Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini1-1/+2
- Fixed broken ICH SPI driver in software sequencer mode - Added "m25p,fast-read" to SPI flash node for x86 boards - Drop ROM_NEEDS_BLOBS and BUILD_ROM for x86 ROM builds - Define a default TSC timer frequency for all x86 boards - x86 MTRR MSR programming codes bug fixes - x86 "hob" command bug fixes - Don't program MTRR for DRAM for FSP1 - Move INIT_PHASE_END_FIRMWARE to FSP2 - Use external graphics card by default on Intel Crown Bay - tangier: Fix DMA controller IRQ polarity in CSRT
2021-08-02x86: crownbay: Use external graphics card by defaultBin Meng1-2/+1
The board routes the Integrated Graphics Device (IGD) to an LVDS panel, which is less popular than a PCIe based graphics card. Disable the IGD so that it does not show up in the PCI configuration space as a VGA display controller, so we can use an external PCIe graphics card with whatever cable we have. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02x86: crownbay: Adjust VGA rom addressBin Meng1-0/+1
binman complains when binary blobs are present: Node '/binman/rom/intel-vga': Offset 0xfff90000 (4294508544) overlaps with previous entry '/binman/rom/u-boot-dtb-with-ucode' ending at 0xfff9204c (4294516812) Adjust VGA rom address to 0xfffa0000 so that u-boot.rom image can be successfully built again. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02x86: crownbay: Disable CONFIG_SPI_FLASH_SMART_HWCAPSBin Meng1-0/+1
Since commit 71025f013ccb ("mtd: spi-nor-core: Rework hwcaps selection") SPI flash on Intel Crown Bay board does not work anymore. Disable CONFIG_SPI_FLASH_SMART_HWCAPS until a proper fix is made to the spi-nor core. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-01lib: disable CONFIG_SPL_HEXDUMP by defaultHeinrich Schuchardt1-0/+2
CONFIG_HEXDUMP is needed to display UEFI variables using 'printenv -e'. Enabling CONFIG_SPL_HEXDUMP only makes sense for debugging purposes. Hence CONFIG_SPL_HEXDUMP should not be enabled by default. The following boards currently have CONFIG_SPL_HEXDUMP=y. This includes boards that don't use SPL at all. axm_defconfig imx8mm-cl-iot-gate_defconfig imx8mm_venice_defconfig imxrt1020-evk_defconfig imxrt1050-evk_defconfig kontron_sl28_defconfig kp_imx53_defconfig lx2160ardb_tfa_stmm_defconfig mt7622_rfb_defconfig octeon_ebb7304_defconfig octeon_nic23_defconfig qemu_arm64_defconfig qemu_arm_defconfig qemu-riscv32_defconfig qemu-riscv32_smode_defconfig qemu-riscv64_defconfig qemu-riscv64_smode_defconfig qemu-x86_64_defconfig qemu-x86_defconfig sandbox64_defconfig sandbox_defconfig stm32mp15_basic_defconfig stm32mp15_trusted_defconfig synquacer_developerbox_defconfig taurus_defconfig xilinx_versal_virt_defconfig The patch only keeps it enabled on sandbox_spl_defconfig Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-31arm: kirkwood: Dreamplug: Add DM Ethernet and DM SATA configsTony Dinh1-0/+4
Add DM_ETH, SATA_MV and associated configs to dreamplug_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31arm: mvebu: gdsys: Remove custom spl_board_init()Pali Rohár1-1/+0
The gdsys a38x config file (controlcenterdc_defconfig) uses BootROM to load U-Boot proper. Since it is now possible to do this via U-Boot SPL framework, we do not need to provide custom spl_board_init() which calls return_to_bootrom(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage headerPali Rohár12-13/+0
Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-30configs: sei610/sei510: set CONFIG_CMD_BCB=yMattijs Korpershoek2-0/+2
SEI-610 and SEI-510 are both for Android boards based on Yukawa[1] Enable the BCB command to enable the standard Android boot flow. [1] https://android.googlesource.com/device/amlogic/yukawa/ Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-29Merge tag 'ti-v2021.10-rc2' of ↵Tom Rini7-9/+42
https://source.denx.de/u-boot/custodians/u-boot-ti - Add MMC High speed modes for AM64 and J7200 - Add Sierra/Torrent SERDES driver - Minor clean-ups for R5F boot from SPL
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass259-259/+259
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass130-137/+137
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass163-163/+163
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOSTSimon Glass34-34/+34
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass96-96/+96
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEWSimon Glass3-3/+3
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_ETH_SUPPORT to SPL_ETHSimon Glass4-4/+4
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_CRYPTO_SUPPORT to SPL_CRYPTOSimon Glass5-5/+5
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass75-75/+75
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-28Makefile: Move phy rules into drivers/phySimon Glass10-0/+10
These don't belong in the drivers Makefile so move them down into the correct place. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup some missing dependencies this exposed] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-28test: cmd: setexpr: add format string testsRoland Gaudig1-0/+1
Add test cases for the setexpr format string operator. Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> [trini: Enable on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-27Merge tag 'u-boot-amlogic-20210727' of ↵Tom Rini4-0/+8
https://source.denx.de/u-boot/custodians/u-boot-amlogic - Add SMBIOS info for Khadas VIM boards - Fix meson-axg-mipi PHY build - Fix VIM3 board phy-names property setup - Return correct value for non emmc boot sources on VIM3 - add kernel compression vars
2021-07-27configs: Enable SMBIOS for Khadas VIM boardsArtem Lapkin4-0/+8
Enable configs to support SMBIOS for all Khadas VIM boards Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Artem Lapkin <art@khadas.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-13 15:33:28 +0300