summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23reboot-mode: read the boot mode from GPIOs statusNandor Han1-0/+2
A use case for controlling the boot mode is when the user wants to control the device boot by pushing a button without needing to go in user-space. Add a new backed for reboot mode where GPIOs are used to control the reboot-mode. The driver is able to scan a predefined list of GPIOs and return the magic value. Having the modes associated with the magic value generated based on the GPIO values, allows the reboot mode uclass to select the proper mode. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini77-0/+80
fsl-qoriq: Update mc firmware size, address in LS1088A, LS2088A, LX2 Updates on ls1043aqds, ls1043ardb Refactor I2C MUX Code on fsl-qoriq platforms.
2021-07-21board: sifive: drop stuff related to unmatched revision 1Zong Li1-4/+0
This patch reverts the following commits: - 4b4159d0f3 ("riscv: dts: add dts for unmatched rev1") - ffe9a394df ("board: sifive: support spl multi-dtb on unmatched board") We won't plan to support unmatched that the revision below 3 in u-boot, so they can be dropped because they might be useless. Changed in v2: - rebase codebase to the latest master branch Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21ARM: dts: rmobile: Remove multiple unused DT properties on R-Car Gen3Marek Vasut6-0/+12
Filter out dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask iommus DT properties on R-Car Gen3, since they are not used by U-Boot and only take space. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: rmobile: Enable sysinfo on R-Car Gen3Marek Vasut3-0/+3
Enable support for sysinfo on supported R-Car Gen3 boards. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. On R-Car Gen3 the sysinfo rcar3 driver is used to parse the board ID EEPROM, obtain board type and revision from it, and let board-info print this information on boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: rmobile: Enable I2C EEPROM support on R-Car Gen3Marek Vasut3-0/+21
Enable support for I2C EEPROM driver on supported Renesas R-Car Gen3 boards. This is useful for accessing the board ID EEPROM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20configs: ls1043aqds: Configure environment related configsKuldeep Singh3-0/+3
LS1043A-QDS board requires updation in few environment configs in TFA and QSPI defconfigs. Following are the changes: - Define CONFIG_ENV_ADDR - Unset CONFIG_SPI_FLASH_BAR - Enable CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1046ardb: enable PHY_FIXEDCamelia Groza8-0/+8
The optical 10G port is described as fixed-link in the device tree. Enable the necessary support. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: t2080qds: Update I2C mux configStephen Carlson6-0/+6
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: lx2160a: Update I2C mux configStephen Carlson8-0/+8
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: ls2080a, ls2088a: Update I2C mux configStephen Carlson14-0/+14
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> [Squashed ls2088a patch to fix compilation] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: ls1088a: Update I2C mux configStephen Carlson12-0/+12
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: ls1046a: Update I2C mux configStephen Carlson11-0/+11
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: ls1043aqds: Update I2C mux configStephen Carlson9-0/+9
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: ls1021aqds: Update I2C mux configStephen Carlson9-0/+9
Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-19Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini4-2/+20
- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony) - Zyxel NSA310S NAS: Convert to Driver Model (Tony) - Turris_omnia: Add `u-boot-env` NOR partition (Marek) - Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek) - Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)
2021-07-19Merge tag 'ti-v2021.10-rc1' of ↵Tom Rini23-26/+55
https://source.denx.de/u-boot/custodians/u-boot-ti - Enabled distro boot for all TI platforms. - Cleanup for AM335x Guardian Board - PRUSS rproc on AM65 platform. - Add PMIC support for J7200 - Misc fixes for Nokia RX-51 # Conflicts: # arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitionsPali Rohár1-0/+3
U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTBMarek Behún1-0/+1
Fixup SPI NOR partition nodes in Linux' device tree prior booting Linux. Linux' devicetree does not contain "u-boot-env" partition and we do not want to add it there because the address is different between stock U-Boot and current upstream U-Boot. Instead we add code that recreates partition nodes from scratch according to how U-Boot sees them (which is defined in U-Boot's device tree). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Add DM Ethernet and DM SATA configsTony Dinh1-1/+5
Add DM_ETH, SATA_MV and associated configs to sheevaplug_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Add DM USB, DM Ethernet, and DM SATA configsTony Dinh1-1/+11
Convert to Driver Model. - Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig - Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig - Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig - Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR to nsa310s_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19usb: Enforce DM_USB migration for USB_HOST devices.Tom Rini13-1/+12
As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-19m68k: Remove M52277EVB boardTom Rini2-70/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-19m68k: Remove M54451EVB boardTom Rini2-82/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-19m68k: Remove M54418TWR boardTom Rini6-207/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-19m68k: Remove M54455EVB boardTom Rini5-224/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-19vinco: Enable DM_USB and DM_SPI_FLASH supportTom Rini1-1/+2
As this platform already enables CONFIG_DM and CONFIG_OF_CONTROL, migrating to DM_USB and DM_SPI_FLASH is just a matter of enabling the correct options. Cc: Gregory CLEMENT <gregory.clement@bootlin.com> u-boot@lists.denx.de (open list) Reported-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18mips: mt7688: gardena-smart-gateway: Adjust to production valuesReto Schneider1-1/+10
This commit updates the default config with the values that will be used soon on the MediaTek MT7688 based GARDENA smart gateway. CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more demanding new configuration. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-17Merge branch '2021-07-16-cleanup-image-support'Tom Rini19-19/+19
- A large rework of the logic around supporting various image types/formats and sharing between the host and target.
2021-07-17Merge tag 'u-boot-imx-20210717' of ↵Tom Rini7-9/+25
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX ---- - mx7ulp : fix WDOG - imx8 : Phytec - USB3 support for i.MX8 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277
2021-07-17imx8mq_evk: Enable the USB3.0 host portYe Li1-0/+9
Setup USB clock in board codes, and enable the DWC3 XHCI and PHY drivers to make USB3.0 host port working on i.MX8MQ EVK. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2021-07-16Kconfig: Rename SPL_CRC32_SUPPORT to SPL_CRC32Simon Glass16-16/+16
Drop the _SUPPORT suffix so we can use CONFIG_IS_ENABLED() with this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Rename CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORTSimon Glass2-2/+2
Drop the ENABLE and SUPPORT parts of this, which are redundant. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Shorten FIT_ENABLE_SHAxxx_SUPPORTSimon Glass1-1/+1
The ENABLE part of this name is redundant, since all boolean Kconfig options serve to enable something. The SUPPORT part is also redundant since Kconfigs can be assumed to enable support for something. Together they just serve to make these options overly long and inconsistent with other options. Rename FIT_ENABLE_SHAxxx_SUPPORT to FIT_SHAxxx Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-0/+1
- designware_wdt: reset watchdog in designware_wdt_stop() function (Meng) - socfpga_stratix10: enable wdt command (Meng) - wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART (Teresa)
2021-07-16arm: socfpga: socfpga_stratix10: enable wdt command by defaultMengLi1-0/+1
In latest u-boot code, watchdog feature is implemented, so enable wdt command by default. Signed-off-by: Meng Li <Meng.Li@windriver.com>
2021-07-16configs: stm32mp1: activate command rngPatrick Delaunay2-4/+4
Activate the command rng with CONFIG_CMD_RNG, used to test the rng driver Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-16stm32mp: configs: activate the command stm32key only for ST boardsPatrick Delaunay2-0/+2
This command is used to evaluate the secure boot on stm32mp SOC, it is deactivated by default in real products. We activate this command only in STMicroelectronics defconfig used with the evaluation boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-15Nokia RX-51: Add support for booting kernel in zImage formatPali Rohár1-0/+1
Enable U-Boot bootz command and update env scripts to try loading also zImage file and to try booting via bootz command. Update also lowlevel_init.S code for checking validity of zImage magic to correctly relocate kernel in zImage format. This change allows U-Boot to directly boot Linux kernel without need for converting kernel image into U-Boot uImage format. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210618132704.32066-1-pali@kernel.org
2021-07-15configs: j7200_evm_r5_defconfig: Enable AVS, PMIC and dependent configsGowtham Tammana1-0/+7
Enable AVS, PMIC and dependent configs. Signed-off-by: Gowtham Tammana <g-tammana@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210714205300.17424-6-g-tammana@ti.com
2021-07-15configs: am65x_evm: Switch envboot out for distro_bootcmdTom Rini1-1/+1
Swap out the TI-centric "envboot" logic for the generic distro_bootcmd logic for the bootcmd we run before trying to do something more complex involving additional firmware, etc. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210713141139.15183-1-trini@konsulko.com
2021-07-15arm: omap4: Disable USB_TTY and related optionsTom Rini2-2/+0
The usbtty functionality is not currently used on these two platforms, disable it. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210708014348.4010-1-trini@konsulko.com
2021-07-15configs: j721e_evm: Switch envboot out for distro_bootcmdTom Rini1-1/+1
Swap out the TI-centric "envboot" logic for the generic distro_bootcmd logic for the bootcmd we run before trying to do something more complex involving additional firmware, etc. Cc: Lokesh Vutla <lokeshvutla@ti.com> (maintainer:J721E BOARD) Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701142743.26190-1-trini@konsulko.com
2021-07-15ti: am43xx_evm: Switch to DISTRO_BOOT onlyTom Rini5-5/+5
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701132612.7559-1-trini@konsulko.com
2021-07-15configs: am3517_evm: Fix boot hangAdam Ford1-3/+2
SPL is really tight on space, so decrease a little memory that we allocate in order to fix boot hang. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Derald D. Woods <woods.technical@gmail.com> Link: https://lore.kernel.org/r/20210626134258.601331-1-aford173@gmail.com
2021-07-15configs: omap3x_logic: Fix boot hang by reducing SYS_MALLOC_F_LENAdam Ford4-4/+4
The AM3517 uses SYS_MALLOC_F_LEN of size 0x3000, but the rest of the OMAP3 boards from LogicPD / BeaconEmbedded use 0x4000, but they don't boot SPL. Reduce the malloc size to restore booting. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210625185717.243211-1-aford173@gmail.com
2021-07-15configs: am65x_evm_a53: Enable PRUSS remoteprocLokesh Vutla1-0/+2
Enable PRUSS remoteproc driver for AM65 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210622063431.3151-6-lokeshvutla@ti.com
2021-07-15configs: am64x_evm_a53_defconfig: Move TF-A load address to 0x701c0000Aswath Govindraju1-1/+1
Earlier, the region 0x701c0000 to 0x701dffff was firewalled off because of a bug in SYSFW. In the v2021.05 release of SYSFW this bug has been fixed and this region can now be used for other allocations. Therefore, move TF-A's load address to 0x701c0000 and update its location in the device tree node. Also, increase the size allocated for TF-A to account for future expansions. Fixes: defd62ca137b ("arm: dts: k3-am64-main: Update the location of ATF in SRAM and increase its max size") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210616163821.20457-2-a-govindraju@ti.com
2021-07-15ti: am335x_evm: Switch to DISTRO_BOOT onlyTom Rini5-5/+5
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210610230147.22475-1-trini@konsulko.com
2021-07-15configs: am335x_guardian: add register maps supportGireesh Hiremath1-0/+1
add support to direct memory access of hardware peripherals registers Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-19-Gireesh.Hiremath@in.bosch.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-11 11:40:13 +0300