summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-01-07udoo_neo: Enable support for USB and storagePeter Robinson1-0/+7
Enable support for USB and USB storage on the UDOO Neo. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fix ethernetPeter Robinson1-1/+1
The ethernet has a RMII not RGMII, also needs DM_MDIO and finally initialise it later in the process as it's not needed that early on and not everything is ready so it locks up the device. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fixes for booting from the mSD cardPeter Robinson1-0/+1
This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-24configs: rock-pi-4: Enable rockchip efuse supportSjoerd Simons2-0/+2
Enable efuse support for reading the cpuid#, serial# and generate a board unique mac address Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OFJagan Teki1-0/+108
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24arm64: dts: rockchip: Sync px30 from linux-nextJagan Teki2-4/+4
Sync the px30 devicetree files from linux-next tree. commit <14ce8069f48b> ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3") Note, this path even sync rk3326 files as it depends on px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: Kconfig: Enable SPL support for rk3568Nico Cheng1-1/+24
Enable SPL support in Kconfig and add some related option in rk3568_common.h Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com> Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-13Merge tag 'u-boot-stm32-20211213' of ↵Tom Rini1-0/+2
https://source.denx.de/u-boot/custodians/u-boot-stm - enable KSZ90x1 PHY driver on DHCOR - DHSOM boards: - increase USB power-good delay - add update_sf script to install U-Boot into SF - increase PHY auto-negotiation timeout to 20 seconds - fix SoM and board coding strap GPIO handling # gpg verification failed.
2021-12-13ARM: stm32: Enable KSZ90x1 PHY driver on DHCORMarek Vasut1-0/+2
Enable KSZ9x01 PHY driver in DHCOR common configuration, since the AV96 board has this PHY populated on the PCB. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13ARM: rmobile: Fix rzg2_beacon_defconfig to address new aliasesAdam Ford1-1/+0
The resync of the device trees from Linux 5.16-rc3 caused aliases to appear on the MMC devices which changed the numbering. This broke the reading/writing of the environmental variables, so update the defconfig accordingly. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-02riscv: Support booting SiFive Unmatched from SPI.Thomas Skibo1-0/+6
Configure SPI flash devices into SPL. Add SPI boot option to spl.c. Document how to format flash for booting. Signed-off-by: Thomas Skibo <thomas-git@skibo.net> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02riscv: Update Microchip MPFS Icicle Kit supportPadmarao Begari1-1/+0
This patch updates Microchip MPFS Icicle Kit support. For now, add Microchip I2C driver, set environment variables for mac addresses and default build for SBI_V02. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-11-30configs: enable CMD_TPM on QEMU ARMHeinrich Schuchardt2-0/+2
With TPM emulation enabled in u-boot-test-hooks we should also provide the tpm2 command used for the test/py/tests/test_tpm2.py test. One of the Python TPMv2 tests expects sandbox specific values. So disable it on other platforms. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-16Merge tag 'xilinx-for-v2022.01-rc3' of ↵Tom Rini1-1/+1
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.01-rc3 sdhci: - Fix emmc mini case with missing firmware interface zynqmp: - Restore JTAG interface if required - Allow overriding board name - Add support for DLC21 - Fix one fallthrought statement description - Use config macro instead of name duplication - Save multiboot to variable firmware: - Handle ipi_req errors better - Use local buffer in case user doesn't need it instead of NULL/0 location spi: - gqsi: Fix write issue at low frequencies net: - gem: Disable broadcasts
2021-11-14Merge tag 'efi-2022-01-rc2-2' of ↵Tom Rini2-0/+4
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc2-2 UEFI: * fix measurement of BootOrder variable for TCG2 protocol TPM: * TIS mmio driver. This driver supports QEMU's emulated TPM.
2021-11-13configs: Resync with savedefconfigTom Rini53-54/+37
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_LAST_STAGE_INIT to KconfigTom Rini5-0/+5
This converts the following to Kconfig: CONFIG_LAST_STAGE_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_PL011_SERIAL et al to KconfigTom Rini8-0/+8
This converts the following to Kconfig: CONFIG_PL011_SERIAL CONFIG_PL01X_SERIAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MACB to KconfigTom Rini12-5/+15
This converts the following to Kconfig: CONFIG_MACB Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MD5 to KconfigTom Rini2-0/+2
This converts the following to Kconfig: CONFIG_MD5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_IMX_BOOTAUX et al to KconfigTom Rini5-0/+5
This converts the following to Kconfig: CONFIG_IMX_BOOTAUX CONFIG_IMX_THERMAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_PROMPT et al to KconfigTom Rini2-0/+2
This converts the following to Kconfig: CONFIG_SYS_PROMPT CONFIG_SYS_PROMPT_HUSH_PS2 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini17-0/+20
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_PHYLIB et al to KconfigTom Rini26-0/+32
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_PHY_ATHEROS CONFIG_PHY_GIGE CONFIG_MII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MISC_INIT_F et al to KconfigTom Rini5-0/+5
This converts the following to Kconfig: CONFIG_MISC_INIT_F CONFIG_MISC_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini9-0/+9
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_USDHC to KconfigTom Rini11-11/+11
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_BITBANGMII to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_BITBANGMII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_DOS_PARTITION to KconfigTom Rini4-0/+4
This converts the following to Kconfig: CONFIG_DOS_PARTITION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_E1000 to KconfigTom Rini6-0/+6
This converts the following to Kconfig: CONFIG_E1000 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ARCH_CPU_INIT to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12boards: siemens: iot2050: Re-enable bootstage reportingJan Kiszka1-0/+2
This got lost while fixing up the condition in board/siemens/iot2050/board.c Fixes: b55881dd ("bootstage: Add SPL support") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini104-3/+171
- device-tree sync-up with Linux for ls1028a - fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc, spintable code, configs, qspi node, pci - enable EFI_SET_TIME support in sl28 - powerpc: Drop -mstring
2021-11-10configs: Enable tpmv2 mmio on qemu for arm/arm64Ilias Apalodimas2-0/+4
A previous commit is adding an MMIO TPMv2 driver. Include in the default qemu arm configs, since we plan on using them on EFI testing Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-10Merge tag 'u-boot-stm32-20211110' of ↵Tom Rini9-29/+46
https://source.denx.de/u-boot/custodians/u-boot-stm - DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL
2021-11-10stm32mp15: remove configs dependency on CONFIG_TFABOOTPatrick Delaunay9-0/+13
Remove the dependency on CONFIG_TFABOOT in stm32mp Kconfig - always activate the ARCH config: CONFIG_ARCH_SUPPORT_PSCI and CONFIG_CPU_V7_HAS_NONSEC - CONFIG_ARMV7_NONSEC is deactivated in trusted defconfig - the correct sysreset driver is activated in each defconfig: CONFIG_SYSRESET_PSCI or SYSRESET_SYSCON Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Align mtdparts with SPI NOR layout on DHSOMMarek Vasut2-1/+4
The DHSOM uses different SPI NOR layout than the ST devkit, stop pulling in the ST specific runtime mtdparts settings and adjust the mtdparts accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Disable video output on DHSOMMarek Vasut2-26/+2
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Disable EFI on DHSOMMarek Vasut2-0/+8
The EFI support is unused and disabling it saves about 70 kiB of space. In case EFI support is required, it can be re-enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Increase default SF bus frequency to 50 MHz and enable SFDPMarek Vasut2-2/+6
Increase default SPI NOR bus frequency from 1 MHz to 50 MHz and enable SFDP parsing to obtain more accurate SPI NOR configuration. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Enable DFU MTD support on DHSOMMarek Vasut2-0/+4
All the STM32MP1 based DHSOM have SPI NOR from which they boot, enable DFU_MTD support to make it possible to expose that SPI NOR via the DFU. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp: add binman support for STM32MP15xPatrick Delaunay9-0/+9
Use binman to add the stm32image header on SPL binary for basic boot or on U-Boot binary when it is required, i.e. for TF-A boot without FIP support, when CONFIG_STM32MP15x_STM32IMAGE is activated. The "binman" tool is the recommended tool for specific image generation. This patch allows to suppress the config.mk file and it is a preliminary step to manage FIT generation with binman. The init_r parsing of U-Boot device tree to search the binman information is not required for STM32MP15, so the binman library can be removed in U-Boot (CONFIG_BINMAN_FDT is deactivated). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-09configs: ls1028a: ensure Ethernet is enabledVladimir Oltean6-0/+6
CONFIG_FSL_ENETC is not explicitly enabled in the NXP LS1028A config files, instead it is selected by CONFIG_MSCC_FELIX_SWITCH, a state of matters which is fragile. CONFIG_MSCC_FELIX_SWITCH depends on CONFIG_DM_DSA, which depends on CONFIG_PHY_FIXED. Not all LS1028A boards did enable CONFIG_PHY_FIXED, which resulted in all of Ethernet being compiled out. This patch makes sure that CONFIG_PHY_FIXED is enabled for all LS1028A boards, and CONFIG_FSL_ENETC as well - don't rely on that fragile selection done by the Felix switch config. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09configs: fsl: migrate FMAN/QE specific defines to KconfigRajesh Bhagat95-0/+117
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09configs: ls1046aqds: Configure environment related configsKuldeep Singh1-2/+3
LS1046A-QDS board requires updation in few environment configs in TFA defconfigs of the board. Following are the changes: - Update CONFIG_ENV_ADDR - Update CONFIG_ENV_SECT_SIZE - Enable CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigsKuldeep Singh9-0/+27
LS1046A-QDS has CONFIG_SPI_FLASH_SST, CONFIG_SPI_FLASH_EON and CONFIG_SPI_FLASH_STMICRO defines present in header. Move these entries from header to defconfigs. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: enable USB periheral support and gadgetsMichael Walle1-0/+5
Enable support to update the board via the DFU protocol and make it possible to export the block devices via USB mass storage protocol. This will not work out of the box, yet. You have to change the dr_mode of the usb0 controller to peripheral manually to make it work. True, OTG support will hopefully coming soon. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: switch to dwc3 driverMichael Walle1-1/+3
Now that the DWC3 USB driver has support for the layerscape platform, use it. This will have the benefit that peripheral mode will work. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: enable EFI UpdateCapsule supportMichael Walle1-0/+6
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 06:15:44 +0300