summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2023-08-09Merge tag 'x86-pull-20230809' of ↵Tom Rini4-7/+127
https://source.denx.de/u-boot/custodians/u-boot-x86 - x86: Fixes for distro booting - x86: Move some boards to text environment
2023-08-09env: Explain how to use #include files in text environmentSimon Glass1-0/+6
Provide documentation on how to share common settings among boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09doc: Explain how to avoid the distro-boot scriptsSimon Glass1-1/+1
Now that standard boot is available, mention this in the environment documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09x86: Update qemu documentationSimon Glass1-4/+84
Add some hints and observations related to booting distros on QEMU on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09x86: coreboot: Update doc for CBFS accessSimon Glass1-0/+34
Add an example to show how cbfs is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [Removed CONFIG_CMD_CBFS from defconfig files] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09bootstd: Rename bootdev_setup_sibling_blk()Simon Glass1-2/+2
This name is a little confusing since it suggests that it sets up the sibling block device. In fact it sets up a bootdev for it. Rename the function to make this clearer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-08-09doc: Begin adding a best practices document for board portsTom Rini2-0/+27
To help guide developers down the right path, begin a document that lists some best practices to follow when creating a new board port. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-09doc: imx8mp_evk: Use in-tree build in the exampleFabio Estevam1-7/+9
To make it consistent with the instructions from other NXP imx8m boards, such as imx8mm-evk and imx8mn-evk, use U-Boot in-tree build in the examples. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-09doc: imx8mp_evk: Remove unneeded export ATF_LOAD_ADDR lineFabio Estevam1-1/+0
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export. The ATF address is now passed via binman in imx8mp-u-boot.dtsi: atf { description = "ARM Trusted Firmware"; type = "firmware"; arch = "arm64"; compression = "none"; load = <0x970000>; entry = <0x970000>; atf_blob: atf-blob { filename = "bl31.bin"; type = "atf-bl31"; }; }; Remove the unneeded export ATF_LOAD_ADDR line. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-09doc: ti: Explain how the various gadget devices can be usedMiquel Raynal1-0/+62
Describe the current situation wrt the handling of USB devices on AM33xx based boards, taking the example of a common board (the Beagle Bone Black) and explaining how the different USB gadgets can be used. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-08-09doc: board: toradex: fix verdin module outputMarcel Ziswiler3-115/+127
Fix the Verdin module output which was missing white space for correct rendering. While at it also leave product links, add section author also for the Verdin iMX8M Mini and Plus, and add a missing CROSS_COMPILE export for the Verdin iMX8M Mini. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Nishanth Menon <nm@ti.com> #verdin-am62 Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-09doc: Add the link for the documentation of the .itsJit Loon Lim1-0/+3
Provide the link for the .its related documentation for Arria10. Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
2023-08-09doc: board: ti: k3: Add a guide to debugging with OpenOCDJason Kacines6-0/+1190
Bootloader debug usually tends to be a bit dicey prior to DDR and serial port getting active in the system. JTAG typically remains the only practical debug option during the initial bringup. OpenOCD is one of the most popular environment for providing debug capability via a GDB compatible interface for developers to work with. Debugging U-Boot and bootloaders on K3 platform does have a bit of tribal knowledge that is better documented in our common platform documentation. Signed-off-by: Jason Kacines <j-kacines@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-08arm_ffa: introduce armffa commandAbdellatif El Khlifi3-0/+104
Provide armffa command showcasing the use of the U-Boot FF-A support armffa is a command showcasing how to invoke FF-A operations. This provides a guidance to the client developers on how to call the FF-A bus interfaces. The command also allows to gather secure partitions information and ping these partitions. The command is also helpful in testing the communication with secure partitions. For more details please refer to the command documentation [1]. A Sandbox test is provided for the armffa command. [1]: doc/usage/cmd/armffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-08arm_ffa: introduce sandbox test cases for UCLASS_FFAAbdellatif El Khlifi1-0/+1
Add functional test cases for the FF-A support These tests rely on the FF-A sandbox emulator and FF-A sandbox driver which help in inspecting the FF-A communication. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-08arm_ffa: introduce sandbox FF-A supportAbdellatif El Khlifi2-2/+18
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support Features of the sandbox FF-A support: - Introduce an FF-A emulator - Introduce an FF-A device driver for FF-A comms with emulated Secure World - Provides test methods allowing to read the status of the inspected ABIs The sandbox FF-A emulator supports only 64-bit direct messaging. Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-08arm_ffa: introduce Arm FF-A supportAbdellatif El Khlifi2-0/+237
Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0 The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1] describes interfaces (ABIs) that standardize communication between the Secure World and Normal World leveraging TrustZone technology. This driver uses 64-bit registers as per SMCCCv1.2 spec and comes on top of the SMCCC layer. The driver provides the FF-A ABIs needed for querying the FF-A framework from the secure world. The driver uses SMC32 calling convention which means using the first 32-bit data of the Xn registers. All supported ABIs come with their 32-bit version except FFA_RXTX_MAP which has 64-bit version supported. Both 32-bit and 64-bit direct messaging are supported which allows both 32-bit and 64-bit clients to use the FF-A bus. FF-A is a discoverable bus and similar to architecture features. FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by the PSCI driver. Clients are able to probe then use the FF-A bus by calling the DM class searching APIs (e.g: uclass_first_device). The Secure World is considered as one entity to communicate with using the FF-A bus. FF-A communication is handled by one device and one instance (the bus). This FF-A driver takes care of all the interactions between Normal world and Secure World. The driver exports its operations to be used by upper layers. Exported operations: - ffa_partition_info_get - ffa_sync_send_receive - ffa_rxtx_unmap Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). Arm specific methods are implemented in the Arm driver (arm-ffa.c). For more details please refer to the driver documentation [2]. [1]: https://developer.arm.com/documentation/den0077/latest/ [2]: doc/arch/arm64.ffa.rst Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Tom Rini <trini@konsulko.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-07Prepare v2023.10-rc2Tom Rini1-2/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-04board: toradex: add verdin am62 supportMarcel Ziswiler4-8/+140
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT V1.0A module and subsequent V1.1 launch configuration SKUs. They are strapped to boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, DFU support is disabled for now due to missing AM62x USB support. The device trees were taken straight from Linux v6.5-rc1. Boot sequence is: SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img) Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-03doc: describe QEMU virtio block deviceHeinrich Schuchardt1-2/+12
Enhance the description of QEMU block devices * Describe how to attach a virtio-blk device. * Sort the command lines for MMC to match the other devices. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-03doc: move README.falcon to HTMLHeinrich Schuchardt3-232/+259
Move the Falcon mode documentation to HTML. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-03doc: board: ti: Add SPDX License to svg imagesNishanth Menon16-0/+64
Add Licensing to svg images to clarify the terms. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-03doc: U-Boot boot phasesHeinrich Schuchardt1-3/+10
Add more detail to the description of U-Boot boot phases: * describe which steps are optional * mentions alternative boot flows Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-02riscv: qemu: Enable usb keyboard as an input deviceBin Meng1-0/+5
This brings PCI xHCI support to QEMU RISC-V and uses a usb keyboard as one of the input devices. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-02riscv: qemu: Enable Bochs video supportBin Meng1-0/+5
Enable video console using the emulated Bochs VGA card. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-31board: rockchip: Add Radxa E25 Carrier BoardJonas Karlman1-0/+1
Radxa E25 is a network application carrier board for the Radxa CM3I SoM with a RK3568 SoC. It features dual 2.5G ethernet, mini PCIe, M.2 B Key, USB3, eMMC, SD, nano SIM card slot and a 26-pin GPIO header. Features tested on a Radxa E25 v1.4: - SD-card boot - eMMC boot - USB host - PCIe/Ethernet adapters is detected - SATA Device tree is imported from linux next-20230728. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: FUKAUMI Naoki <naoki@radxa.com>
2023-07-31board: rockchip: add Radxa ROCK5A Rk3588 boardEugen Hristev1-0/+1
ROCK 5A is a Rockchip RK3588S based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specifications: Rockchip Rk3588S SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector 4-lane MIPI DSI connector Audio – 3.5mm earphone jack eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60 Gigabit Ethernet RJ45 with optional PoE support 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 56mm (Raspberry Pi 4 form factor) Kernel commits: d1824cf95799 ("arm64: dts: rockchip: Add rock-5a board") 991f136c9f8d ("arm64: dts: rockchip: Update sdhci alias for rock-5a") 304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a") cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31doc: rockchip: Update SPI flashing instructionJonas Karlman1-21/+5
Update documentation on how to write a bootable u-boot-rockchip-spi.bin image into SPI flash. This removes the reference to a hardcoded and now obsolete 0x60000 payload offset. Also remove an obsolete reference to pad_cat. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Pine64 SOQuartz on CM4-IOJonas Karlman1-0/+1
The Pine64 SOQuartz compute module is mostly pin-compatible with the RPi CM4 form factor. Therefore, it can slot into the official Raspberry Pi CM4 IO carrier board. Add this configuration to U-Boot. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Pine64 SOQuartz on BladeJonas Karlman1-0/+1
The Pine64 SOQuartz Blade board is a carrier board for the SOQuartz CM4-compatible compute module. It features PoE, an M.2 slot, an SD card slot, HDMI, USB, serial and ethernet. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - PCIe/NVMe - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Pine64 SOQuartz on Model AJonas Karlman1-0/+1
The Pine64 SOQuartz Model A board is a carrier board for the SOQuartz CM4-compatible compute module. It exposes PCIe, ethernet, USB, HDMI, CSI, DSI, eDP and a 40 pin GPIO header, and is powered by 12V DC. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - PCIe/NVMe/AHCI - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Pine64 Quartz64-B BoardJonas Karlman1-0/+1
The Pine64 Quartz64 Model B is a credit-card sized single-board computer based on the Rockchip RK3566 SoC. The board features an M.2 PCIe slot, USB3, USB2, eMMC, SD, ethernet, HDMI, analog audio out, a 40 pin GPIO header and a DSI and CSI port, as well as on-board Wi-Fi. Features tested on a Quartz64-B 4GB v1.4 2022-06-06: - SD-card boot - eMMC boot - SPI Flash boot - PCIe/NVMe - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Pine64 Quartz64-A BoardJonas Karlman1-0/+1
The Pine64 Quartz64 Model A is a single-board computer based on the Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0, CSI, DSI, eDP, eMMC, SD, and an e-paper parallel port, as well as a 20 pin GPIO header. Features tested on a Quartz64-A 8GB v2.0 2021-04-27: - SD-card boot - eMMC boot - PCIe/NVMe/AHCI - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28Merge tag 'efi-2023-10-rc2' of ↵Tom Rini25-853/+11949
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-10-rc2 Documentation: * Update the documentation for TI K3 boards (use SVG images) * Update doc/sphinx/requirements.txt * Describe QEMU emulation of block devices UEFI * Fix device paths for special block devices
2023-07-28Merge branch '2023-07-27-TI-K2-K3-updates'Tom Rini1-16/+15
- Resync some of the K3 DTS files with the kernel, and pull in some required related updates to keep drivers in sync with the dts files now. Bring in some incremental fixes on top of one of the series I applied recently as well as updating the iot2050 platform. Also do a few small updates to the K2 platforms.
2023-07-28doc: board: siemens: iot2050: Update build env varsJan Kiszka1-2/+2
ATF is now called BL31, and OP-TEE since 3.21 suggests to use tee-raw.bin instead of (the still identical) tee-pager_v2.bin. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations againJan Kiszka1-14/+13
This avoids having to maintain to defconfigs that are 99% equivalent. The approach is to use binman to generate two flash images, flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we can avoid duplicating the common binman image definitions. Suggested-by: Andrew Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28board: rockchip: Add Hardkernel ODROID-M1Jonas Karlman1-0/+1
Hardkernel ODROID-M1 is a single board computer with a RK3568B2 SoC, a slightly modified version of the RK3568 SoC. Features tested on a ODROID-M1 8GB v1.0 2022-06-13: - SD-card boot - eMMC boot - SPI Flash boot - PCIe/NVMe/AHCI - SATA port - USB host Device tree is imported from linux v6.4. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28arm: rockchip: Add Radxa ROCK 4SEChristopher Obbard1-1/+1
Add board-specific devicetree/config for the RK3399T-based Radxa ROCK 4SE board. This board offers similar peripherals in a similar form-factor to the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor (which has different OPP table than the RK3399) and other minimal hardware changes. Kernel tag: next-20230719 Kernel commits: - 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE") Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28board: rockchip: Add Edgeble Neural Compute Module 6BJagan Teki1-0/+1
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module based on Rockchip RK3588J from Edgeble AI. Add support for this SoM and IO board. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28arch: rockchip: rk3588: Fix missing suffix 'A' for Edgeble Neu6AJagan Teki1-1/+1
Add missing suffix 'A' for Edgeble Neu6A SoM and IO boards. Fixes: <15b2d1fb727> ("board: rockchip: Add Edgeble Neural Compute Module 6") Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28doc: anbernic: Update RGxx3 Docs for panel detectionChris Morgan1-11/+20
Update the Anbernic RGxx3 documentation to note that panel detection has been added and how it works. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28board: ti: k3: Convert boot flow ascii flow to svgNishanth Menon4-12/+1265
Replace the ascii flow diagram with svg. Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: k3: Sort the boards in alphabetical orderNishanth Menon1-2/+2
Keep the boards sorted in alphabetical order. Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: *: Add platform informationNishanth Menon4-0/+17
Add link to the actual platform for folks to find details about the board in addition to the SoC's TRM. Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: j7200_evm: Convert the emmc layout to svgNishanth Menon3-30/+1169
Convert the emmc memory layout to svg Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: am65x_evm: Convert the emmc layout to svgNishanth Menon2-16/+749
Convert the emmc memory layout to svg Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: am65/j721e: Convert OSPI memory map to svgNishanth Menon3-52/+723
Convert the memory map for OSPI as a common memory map Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: am65x_evm: Convert the UART boot responsibility to list tableNishanth Menon1-10/+28
Use list tables to map up the UART Boot responsibility table. Signed-off-by: Nishanth Menon <nm@ti.com>
2023-07-28doc: board: ti: j7200_evm: Convert switch settings to list tablesNishanth Menon1-11/+26
Use list tables to map up the dip switch settings Signed-off-by: Nishanth Menon <nm@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 08:43:02 +0300