summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2021-10-31board: samsung: add support for Galaxy A series of 2017 (a5y17lte)Dzmitry Sankouski3-0/+104
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski2-0/+39
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31serial: qcom: add support for GENI serial driverDzmitry Sankouski1-0/+6
Generic Interface (GENI) Serial Engine (SE) based uart can be found on newer qualcomm SOCs, starting from SDM845. Tested on Samsung SM-G9600(starqltechn) by chain-loading u-boot with stock bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31doc: board: apple: Add Apple M1 documentationMark Kettenis3-0/+69
Provide preliminary instructions on how to get U-Boot to run on Apple Silicon Macs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31iommu: Add IOMMU uclassMark Kettenis1-0/+206
This uclass is intended to manage IOMMUs on systems where the IOMMUs are not in bypass mode by default. In that case U-Boot cannot ignore the IOMMUs if it wants to use devices that need to do DMA and sit behind such an IOMMU. This initial IOMMU uclass implementation does not implement and device ops and is intended for IOMMUs that have a bypass mode that does not require address translation. Support for IOMMUs that do require address translation is planned and device ops will be defined when support for such IOMMUs will be added. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas1-4/+3
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-25Revert "Revert "doc: Update CapsuleUpdate READMEs""AKASHI Takahiro1-0/+124
This reverts commit a7e4f905d206d5895dab4bd38a8316e4f2fe15fe. The description originally written by Sughosh is still valid even after the commit 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to .rodata"") was applied. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2021-10-25doc: Remove the obsolete README.mpc74xx fileThomas Huth1-22/+0
Support for the PPC74xx processors has been removed in commit d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support") more than 6 years ago already. So the corresponding README file can now be removed, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-25doc: remove AMCC PPC405 processor referencesHeinrich Schuchardt1-22/+0
Support for PPC4XX processors has been removed. So we should not mention it in the documentation. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini3-32/+40
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini5-94/+12
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic10-72/+446
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21doc: Remove obsolete README.440-DDR-performance fileThomas Huth1-90/+0
The PPC 440 support has been removed in commit 98f705c9cefd ("powerpc: remove 4xx support") already, so this file is certainly not required anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21doc: add python3-pkg-resources to build dependenciesHeinrich Schuchardt1-3/+3
tools/binman/control.py imports Python package pkg_resources. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21doc: add system reset to API documentationHeinrich Schuchardt2-0/+8
Complete the Sphinx documentation in include/sysreset.h Add the include to the generated HTML documentation of the U-Boot API. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-21doc: require Sphinx 3.4.3Heinrich Schuchardt1-1/+1
For enums documented according to the requirements in chapter "Structure, union, and enumeration documentation" of https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html errors occur with Sphinx 2.4.4 which disappear with Sphinx 3.4.3, e.g. /builds/u-boot/custodians/u-boot-efi/doc/api/sysreset:6: ./include/sysreset.h:60:Unknown interpreted text role "enum". Sphinx 3.4.3 is the version used by Debian in the current release. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-20Merge tag 'u-boot-imx-20211020' of ↵Tom Rini4-1/+130
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed.
2021-10-20doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blownMarek Vasut1-7/+9
On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are placed at different offset than on iMX8MM with Fast Boot fuse NOT blown. List both options and both offsets to avoid confusion. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10Marek Vasut1-1/+1
The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the text which currently says it is in GPR0 while using the correct address of GPR10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20imx8mm-evk: Generate a single bootable flash.bin againFabio Estevam1-1/+0
After the conversion to binman in commit 8996e6b7c6a1 ("imx8mm_evk: switch to use binman to pack images"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mm_evk.rst to remove the u-boot.itb copy step. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler1-23/+30
Use binman to pack images. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-19drivers/gpio: add support for MAX7320 i2c i/o expanderHannes Schmelzer1-0/+36
This commit adds support for the MAX7320 (and clones) gpio expander. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2021-10-19Makefile: Only build dtc if neededSimon Glass1-0/+21
At present U-Boot always builds dtc if CONFIG_OF_CONTROL is defined, even when DTC is provided. The built dtc is not actually used, so this is a waste of time. Update the Makefile logic to build dtc only if one is not provided to the build with the DTC variable. Add documentation to explain this. This saves about 3.5 seconds of elapsed time on a clean build of sandbox_spl for me. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-15doc: rockchip: write all brand names with a capitalJohan Jonker1-8/+8
Brand names are supposed to be written with a capital, so change them all. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-10-15doc: rockchip: sort rockchip support list for rk3188Johan Jonker1-2/+2
In the list of mainline U-boot supported Rockchip boards rk3188 is placed below under the name rv3188. Give back it's original name and sort the list in alphabetical order. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-10-15pytest: Show a message when sandbox crashesSimon Glass1-0/+8
When a test hands on a real board there is no way on the console to obtain any information about why it hung. With sandbox we can actually find out that it died and get a signal or exit code. Add this to make it easier to figure out what happened. So instead of: test/py/u_boot_spawn.py:171: in expect c = os.read(self.fd, 1024).decode(errors='replace') E OSError: [Errno 5] Input/output error We get: test/py/u_boot_spawn.py:171: in expect c = os.read(self.fd, 1024).decode(errors='replace') E ValueError: U-Boot exited with signal 11 (Signals.SIGSEGV) Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-15pytest: Shorten traceback length by defaultSimon Glass1-0/+7
This produces a lot of code output which is not very helpful and is quite annoying to wade through. Use the short format by default. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-12dt-bindings: pwm: pwm-at91: Add PWM bindings for A5D2Dan Sneddon1-0/+16
Document the bindings needed for the PWM device on the SAMA5D2. Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com>
2021-10-07imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards ↵Frieder Schrempf2-0/+86
(N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-07imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards ↵Frieder Schrempf2-0/+44
(N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-10-07arm: dts: imx8mp: Generate single bootable binaryTeresa Remmet1-1/+0
binman conversion made flashing flash.bin and u-boot.itb necessary. Update binman config to create a single flash.bin image again. This updates imx8mp_evk and phyCORE-i.MX8MP as they share the same binman config. Updated also imx8mp_evk documentation. Tested on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-07doc: boards: amlogic: update for Radxa ZeroChristian Hewitt2-1/+76
Add documentation bits for the Radxa Zero Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: updated u200 MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: amlogic: add JetHub D1/H1 docsVyacheslav Bocharov3-63/+270
Fix doc/board/amlogic/index.rst: - Add S905W to S905X column. - Add JetHub devices to the corresponding columns. - Fix tabs to spaces for table alignment Add doc/board/amlogic files: - jethub-j100.rst - jethub-j80.rst Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: amlogic: add Banana Pi M5Neil Armstrong1-0/+1
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: meson: add Beelink GS-King X boardNeil Armstrong1-1/+1
The Beelink GS-King X is a variant of the GS King boards but with an internal USB to SATA bridge and advanced audio features. [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07doc: boards: amlogic: update for Odroid HC4Neil Armstrong2-1/+4
Add documentation bits for the Odroid-HC4. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-06Convert CONFIG_NAND_OMAP_ECCSCHEME to KconfigTom Rini1-66/+0
The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in include/linux/mtd/omap_gpmc.h for valid ECC schemes. Make which one we will use be a choice statement, enumerating the ones which we have implemented. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06acpi: Use U-Boot version for OEM_REVISIONPali Rohár1-1/+0
OEM_REVISION is 32-bit unsigned number. It should be increased only when changing software version. Therefore it should not depend on build time. Change calculation to use U-Boot version numbers and set this revision to date number. Prior this change OEM_REVISION was calculated from build date and stored in the same format. After this change macro U_BOOT_BUILD_DATE is not used in other files so remove it from global autogenerated files and also from Makefile. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-05doc: test: Explain how to run pytests in parallelSimon Glass1-0/+30
Add documentation for this so people can try it out. At present it does not fully work. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-03board: siemens: Add support for SIMATIC IOT2050 devicesJan Kiszka3-0/+88
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version. Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash. Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050 Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-10-02arm: Remove zmx25 board and ARCH_MX25Tom Rini1-10/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser <weisserm@arcor.de> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01doc/kwboot.1: Update man pageMarek Behún1-21/+39
Update man page for the kwboot utility. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk16-38/+38
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing white spaceWolfgang Denk2-2/+2
Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk2-3/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk9-9/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-29Merge branch 'network_master' of ↵Tom Rini1-1/+11
https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-28net: replace the "xfi" phy-mode with "10gbase-r"Vladimir Oltean1-1/+11
As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28doc: Add mention of the /config bindingSimon Glass2-0/+11
The devicetree binding files are in their own directory and use a simple text format. Add a link for the binding for the /config node, since it is otherwise hard to find. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-03 19:52:06 +0300