summaryrefslogtreecommitdiff
path: root/drivers/clk/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-10-18clk:starfive-jh7110: Add clock driver for JH7110yanhong.wang1-0/+1
Add a clock driver for StarFive JH7110 Soc platform. Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
2021-08-22clk: clk_versaclock: Add support for versaclock driverAdam Ford1-0/+9
The driver is based on the Versaclock driver from the Linux code, but due differences in the clock API between them, some pieces had to be changed. This driver creates a mux, pfd, pll, and a series of fod ouputs. Rate Usecnt Name ------------------------------------------ 25000000 0 `-- x304-clock 25000000 0 `-- clock-controller@6a.mux 25000000 0 |-- clock-controller@6a.pfd 2800000000 0 | `-- clock-controller@6a.pll 33333333 0 | |-- clock-controller@6a.fod0 33333333 0 | | `-- clock-controller@6a.out1 33333333 0 | |-- clock-controller@6a.fod1 33333333 0 | | `-- clock-controller@6a.out2 50000000 0 | |-- clock-controller@6a.fod2 50000000 0 | | `-- clock-controller@6a.out3 125000000 0 | `-- clock-controller@6a.fod3 125000000 0 | `-- clock-controller@6a.out4 25000000 0 `-- clock-controller@6a.out0_sel_i2cb A translation function is added so the references to <&versaclock X> get routed to the corresponding clock-controller@6a.outX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2021-07-01Merge tag 'xilinx-for-v2021.10' of ↵Tom Rini1-0/+11
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.10 clk: - Add driver for Xilinx Clocking Wizard IP fdt: - Also record architecture in /fit-images net: - Fix plat/priv data handling in axi emac - Add support for 10G/25G speeds pca953x: - Add missing dependency on i2c serial: - Fix dependencies for DEBUG uart for pl010/pl011 - Add setconfig option for cadence serial driver watchdog: - Add cadence wdt expire now function zynq: - Update DT bindings to reflect the latest state and descriptions zynqmp: - Update DT bindings to reflect the latest state and descriptions - SPL: Add support for ECC DRAM initialization - Fix R5 core 1 handling logic - Enable firmware driver for mini configurations - Enable secure boot, regulators, wdt - Add support xck devices and 67dr - Add psu init for sm/smk-k26 SOMs - Add handling for MMC seq number via mmc_get_env_dev() - Handle reserved memory locations - Add support for u-boot.itb generation for secure OS - Handle BL32 handoffs for secure OS - Add support for 64bit addresses for u-boot.its generation - Change eeprom handling via nvmem aliases
2021-06-23clk: zynq: Add clock wizard driverZhengxun1-0/+11
The Clocking Wizard IP supports clock circuits customized to your clocking requirements. The wizard support for dynamically reconfiguring the clocking primitives for Multiply, Divide, Phase Shift/Offset, or Duty Cycle. Limited by U-Boot clk uclass without set_phase API, this patch only provides set_rate to modify the frequency. Signed-off-by: Zhengxun <zhengxunli.mxic@gmail.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-17clk: k210: Move k210 clock out of its own subdirectorySean Anderson1-1/+13
Now that we have only one clock driver, we don't need to have our own subdirectory. Move the driver back with the rest of the clock drivers. The MAINTAINERS for kendryte pinctrl is also fixed since it has always been wrong. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-23clk: Fix typo in Zynq Kconfig symbol descriptionMichal Simek1-1/+1
Trivial typo fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-18clk: Add Microchip PolarFire SoC clock driverPadmarao Begari1-0/+1
Add clock driver code for the Microchip PolarFire SoC. This driver handles reset and clock control of the Microchip PolarFire SoC device. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-12clk: move clk-ti-sci driver to 'ti' directoryDario Binacchi1-8/+0
The patch moves the clk-ti-sci.c file to the 'ti' directory along with all the other TI's drivers, and renames it clk-sci.c. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12clk: ti: add mux clock driverDario Binacchi1-0/+1
The driver manages a register-mapped multiplexer with multiple input clock signals or parents, one of which can be selected as output. It uses routines provided by the common clock framework (ccf). The code is based on the drivers/clk/ti/mux.c driver of the Linux kernel version 5.9-rc7. For DT binding details see: - Documentation/devicetree/bindings/clock/ti/mux.txt Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-09-30clk: add clock driver for SCMI agentsEtienne Carriere1-0/+8
This change introduces a clock driver for SCMI agent devices. When SCMI agent and SCMI clock drivers are enabled, SCMI agent binds a clock device for each SCMI clock protocol devices enabled in the FDT. SCMI clock driver is embedded upon CONFIG_CLK_SCMI=y. If enabled, CONFIG_SCMI_AGENT is also enabled. SCMI Clock protocol is defined in the SCMI specification [1]. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Lukasz Majewski <lukma@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-03clk: clk_octeon: Add simple MIPS Octeon clock driverStefan Roese1-0/+7
This patch adds a simple clock driver for the Marvell Octeon MIPS SoC family. Its for IO clock rate passing via DT in some of the Octeon driver, like I2C. So that we don't need to use the non-mainline API octeon_get_io_clock(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Lukasz Majewski <lukma@denx.de>
2020-07-01clk: Add K210 pll supportSean Anderson1-0/+1
This pll code is primarily based on the code from the kendryte standalone sdk in lib/drivers/sysctl.c. k210_pll_calc_config is roughly analogous to the algorithm used to set the pll frequency, but it has been completely rewritten to be fixed-point based. Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Lukasz Majewski <lukma@denx.de>
2020-05-13CLK: ARC: HSDK: add separate clock map for HSDK-4xDEugeniy Paltsev1-3/+4
HSDK and HSDK-4xD clock trees are slightly different. commit 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") introduce regression for HSDK board cause crash when setting tunnel clock. Fix that. Fixes: 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-07x86: Add a clock driver for Intel devicesSimon Glass1-0/+10
So far we have avoided adding a clock driver for Intel devices. But the Designware I2C driver needs a different clock (133MHz) on Intel devices than on others (166MHz). Add a simple driver that provides this information. This driver can be expanded later as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-11clk: cdce9xx: add support for cdce9xx clock synthesizerTero Kristo1-0/+7
Add support for CDCE913/925/937/949 family of devices. These are modular PLL-based low cost, high performance, programmable clock synthesizers, multipliers and dividers. They generate up to 9 output clocks from a single input frequency. The initial version of the driver does not support programming of the PLLs, and thus they run in the bypass mode only. The code is loosely based on the linux kernel cdce9xx driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-08clk: versal: Add clock driver supportSiva Durga Prasad Paladugu1-0/+8
This patch adds clock driver support for Versal platform. The clock driver queries and performs clock operations using PLM firmware by communicating with it using SMC calls. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08zynqmp: firmware: Add Xilinx ZynqMP firmware driverRajan Vaja1-0/+1
Add simple ZynqMP firmware drive to populate child nodes under zynqmp_firmware DT node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-26Kconfig: Varios: Fix more SPL, TPL dependenciesAdam Ford1-0/+1
Several options are presenting themselves on a various boards where the options are clearly not used. (ie, SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. In some instances, I wasn't sure of DM was required, so I simply made them SPL or TPL. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-22clk: imx: expose CCF entry for allPeng Fan1-2/+0
Expose CCF entry, then we could avoid expand the SoC support list Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add composite clk supportPeng Fan1-0/+14
Import clk composite clk support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini1-0/+22
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-19clk: sandbox: Add sandbox test code for Common Clock Framework [CCF]Lukasz Majewski1-1/+9
This patch provides code to implement the CCF clock tree in sandbox. It uses all the introduced primitives; some generic ones are reused, some sandbox specific were developed. In that way (after introducing the real CCF tree in sandbox) the recently added to clk-uclass.c: clk_get_by_id() and clk_get_parent_rate() are tested in their natural work environment. Usage (sandbox_defconfig and sandbox_flattree_defconfig): ./u-boot --fdt arch/sandbox/dts/test.dtb --command "ut dm clk_ccf" Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)Lukasz Majewski1-0/+14
This patch brings the files from Linux kernel (linux-stable/linux-5.1.y SHA1: 5752b50477da)to provide clocks support as it is used on the Linux kernel with Common Clock Framework [CCF] setup. The directory structure has been preserved. The ported code only supports reading information from PLL, MUX, Divider, etc and enabling/disabling the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic to the alias numbering as the information about the clock is read from the device tree. One needs to pay attention to the comments indicating necessary for U-Boot's driver model changes. If needed, the code can be extended to support the "set" part of the clock management. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19clk: sifive: Factor-out PLL library as separate moduleAnup Patel1-0/+1
To match SiFive clock driver with latest Linux, we factor-out PLL library as separate module under drivers/clk/analogbits. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-23clk: create meson directory and move related driversJerome Brunet1-0/+1
In order to support the Amlogic G12A clock controller, re-architect the clock files into a meson directory. No functionnal changes. MAINTAINERS entry is also updated. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-02-27clk: Add SiFive FU540 PRCI clock driverAnup Patel1-0/+1
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com> found in commit 999529edf517ed75b56659d456d221b2ee56bb60 of: https://github.com/riscv/riscv-linux Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-01-18clk: Add Allwinner A64 CLK driverJagan Teki1-0/+1
Add initial clock driver for Allwinner A64. Implement USB clock enable and disable functions for OHCI, EHCI, OTG and USBPHY gate and clock registers via ccu clk gate table. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-10-22clk: imx: add clk driver for i.MX8QXPPeng Fan1-0/+1
Add clk driver for i.MX8QXP. This basic version supports clk enable/disable/get_rate/set_rate operations for I2C, ENET, SDHC0 and UART clocks. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-09-30clk: Add support for Arm's Versatile Express OSC clock generatorsLiviu Dudau1-0/+7
The Arm Versatile Express and Juno development boards contain an OSC clock generator that can be accessed through the Versatile Express config bus. The generators are quite often being controlled by some MCU and the config bus offers a uniform way of exposing them. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-18clk: Add MPC83xx clock driverMario Six1-0/+6
Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-11clk: Introduce TI System Control Interface (TI SCI) clock driverAndreas Dannenberg1-0/+8
Some TI Keystone 2 and K3 family of SoCs contain a system controller (like the Power Management Micro Controller (PMMC) on 66AK2G SoCs and the Device Management and Security Controller on AM65x SoCs) that manage the low-level device control (like clocks, resets etc) for the various hardware modules present on the SoC. These device control operations are provided to the host processor OS through a communication protocol called the TI System Control Interface (TI SCI) protocol. This patch adds a clock driver that communicates to the system controller over the TI SCI protocol for performing clock management of various devices present on the SoC. Various clock functionality is achieved by the means of different TI SCI device operations provided by the TI SCI framework. This code is loosely based on the drivers/clk/keystone/sci-clk.c driver of the Linux kernel. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-10clk: Kconfig: Ascending order to sub directiory kconfigsJagan Teki1-4/+4
sourcing of sub directiory kconfig files are not in proper order, so keep them in ascending order. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-09clk: Add Actions Semi OWL clock supportManivannan Sadhasivam1-0/+1
This commit adds Actions Semi OWL family base clock and S900 SoC specific clock support. For S900 peripheral clock support, only UART clock has been added for now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-14driver: clk: Add support for clocks on Armada 37xxMarek Behún1-0/+1
The drivers are based on Linux driver by Gregory Clement. The TBG clocks support only the .get_rate method. - since setting rate is not supported, the driver computes the rates when probing and so subsequent calls to the .get_rate method do not read the corresponding registers again The peripheral clocks support methods .get_rate, .enable and .disable. - the .set_parent method theoretically could be supported on some clocks (the parent would have to be one of the TBG clocks) - the .set_rate method would have to try all the divider values to find the best approximation of a given rate, and it doesn't seem like this should be needed in U-Boot, therefore not implemented Signed-off-by: Marek Behun <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-09clk: Add ICS8N3QV01 driverMario Six1-0/+8
Add a driver for the ICS8N3QV01 Quad-Frequency Programmable VCXO. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-19clk: add driver for stm32mp1Patrick Delaunay1-0/+8
add RCC clock driver for STMP32MP157 - base on driver model = UCLASS_CLK - support ops to enable, disable and get rate of all SOC clock needed by U-Boot Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-12-11ARC: clk: introduce HSDK CGU clock driverEugeniy Paltsev1-0/+6
Synopsys HSDK clock controller generates and supplies clocks to various controllers and peripherals within the SoC. Each clock has assigned identifier and client device tree nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device tree sources. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-11-30clk: stm32f7: rename clk_stm32f7.c to clk_stm32f.cPatrice Chotard1-0/+8
Now that clk_stm32f7.c manages clocks for both STM32F4 and F7 SoCs rename it to a more generic clk_stm32f.c Fix also some checkpatch errors/warnings. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-09-14clk: Kconfig: Add dependences of SPL_CLKWenyou Yang1-1/+1
The SPL_CLK config should depend on SPL && SPL_DM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: dm: Kconfig: split CLK support for SPL and TPLPhilipp Tomsich1-0/+10
Introduce TPL_CLK to allow finer-grained selection of TPL features for feature-rich (i.e. DM-based) TPL stages. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: dm: Kconfig: SPL_CLK depends on SPL_DMPhilipp Tomsich1-1/+1
SPL_CLK should also depend on SPL_DM (and not just on CLK). Add the additional dependency. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-02clk: rmobile: Add RCar Gen3 clock driverMarek Vasut1-0/+1
Add clock driver for the RCar Gen3 R8A7795 and R8A7796 SoCs . This driver allows reading out the clock configuration set by previous boot stages and enabling and disabling clock using the MSTP registers. Setting clock is not supported thus far. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-10dm: clk: add BCM6345 clock driverÁlvaro Fernández Rojas1-0/+8
This is a simplified version of linux/arch/mips/bcm63xx/clk.c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-17clk: zynq: Add zynq clock framework driverStefan Herbrechtsmeier1-0/+8
Add a clock framework driver for the zynq platform. The driver is based on the platform zynq clock driver but reworked to use static functions instead of run-time generated objects even for unused clocks. Additionally the CONFIG_ZYNQ_PS_CLK_FREQ is replaced by the ps-clk-frequency from the device tree. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10clk: zynqmp: Add clock driver support for zynqmpSiva Durga Prasad Paladugu1-0/+7
Add basic clock driver support for zynqmp which sets the required clock for GEM controller Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-21clk: boston: Providea simple driver for Boston board clocksPaul Burton1-0/+8
Add a simple driver for the clocks provided by the MIPS Boston development board. The system provides information about 2 clocks whose rates are fixed by the bitfile flashed in the boards FPGA, and this driver simply reads the rates of these 2 clocks. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-16Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini1-0/+1
2016-08-15clk: at91: Add clock driverWenyou Yang1-0/+1
The patch is referred to at91 clock driver of Linux, to make the clock node descriptions in DT aligned with the Linux's. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-15clock: add Tegra186 clock driverStephen Warren1-0/+1
In Tegra186, on-SoC clocks are manipulated using IPC requests to the BPMP (Boot and Power Management Processor). This change implements a driver that does that. A tegra/ sub-directory is created to follow the existing pattern. It is unconditionally selected by CONFIG_TEGRA186 since virtually any Tegra186 build of U-Boot will need the feature. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-25clk: exynos: add clock driver for Exynos7420 SocThomas Abraham1-0/+1
Add a clock driver for Exynos7420 SoC. There are about 25 clock controller blocks in Exynos7420 out of which support for topc, top0 and peric1 blocks are added in this initial version of the driver. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 06:49:04 +0300