summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2019-04-24Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogicTom Rini8-1/+349
- Add support for Amlogic p200 & p201 Reference Designs - Add Amlogic SoC information display - Add support for the Libretech-AC AML-S805X-AC board - Add Amlogic AXG reset compatible - Add I2C support for Amlogic AXG - Fix AXG PIN and BANK pinctrl definitions - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset - Add initial support for Amlogic G12A SoC and U200 board - Enable PHY_REALTEK for selected boards - Fix Khadas VIM2 README
2019-04-24clk: mediatek: add driver for MT8516Fabien Parent2-0/+803
Add clock driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> [trini: Redo whitespace] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-24clk: mediatek: add support for SETCLR_INV and NO_SETCLR flagsFabien Parent1-0/+12
Add the implementation for the CLK_GATE_SETCLR_INV and CLK_GATE_NO_SETCLR flags. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23clk: meson: add g12a supportJerome Brunet3-0/+324
Add basic support for the Amlogic G12A clock controller based on the AXG driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23clk: create meson directory and move related driversJerome Brunet7-1/+25
In order to support the Amlogic G12A clock controller, re-architect the clock files into a meson directory. No functionnal changes. MAINTAINERS entry is also updated. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini1-1/+2
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-16clk: sunxi: r40: Fix GMAC reset reg offsetJagan Teki1-1/+2
GMAC reset reg offset added by below commit seems to assume it as EMAC but R40 indeed using GMAC. "clk: sunxi: Implement EMAC, GMAC clocks, resets" (sha1: 68620c9698f109c1f001f80d282138a5c67cabef) So, fix by updating the reg offset for RST_BUS_GMAC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16ARM: zynq: Add missing i2c get_rate for fixing i2c SPLHannes Schmelzer1-0/+2
The commit 'f48ef0d81aa837a33020f8d61abb3929ba613774' did break I2C support because requesting the clock for the I2C ip-block isn't supported during SPL. To fixup this we add support requesting clocks for: - i2c0 - i2c1 Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-13Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dmTom Rini2-2/+3
fdtdec tests and improvements for carve-outs pinctrl race-condition fix various other fixes in sandbox, sound, mkimage, etc.
2019-04-12Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-bootTom Rini1-0/+2
stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
2019-04-12stm32mp1: add trusted boot with TF-APatrick Delaunay1-0/+2
Add support of trusted boot, using TF-A as first stage bootloader, The boot sequence is BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32 The TF-A monitor provides secure monitor with support of SMC - proprietary to manage secure devices (BSEC for example) - PSCI for power The same device tree is used for STMicroelectronics boards with basic boot and with trusted boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12clk: socfpga: replace dm_fdt_pre_reloc by dm_ofnode_pre_relocPatrick Delaunay1-1/+2
Prepare to remove dm_fdt_pre_reloc function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-12clk: at91: replace dm_fdt_pre_reloc by dm_ofnode_pre_relocPatrick Delaunay1-1/+1
Prepare to remove dm_fdt_pre_reloc Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09clk: renesas: Synchronize Gen3 tables with Linux 5.0Marek Vasut8-130/+215
Synchronize R-Car Gen3 clock tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09clk: renesas: Synchronize Gen2 tables with Linux 5.0Marek Vasut4-16/+14
Synchronize R-Car Gen2 clock tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09clk: renesas: Add R8A77965 clock tablesMarek Vasut4-19/+346
Add clock tables for R8A77965 from Linux 5.0 , except for the crit, R and Z clock, which are neither used nor supported by the U-Boot clock framework yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-01clk: sunxi: a10: Add CLK_AHB_GMACJagan Teki1-0/+2
CLK_AHB_GMAC was suppose to be part of previous commit "clk: sunxi: Implement A10 EMAC clocks" add it so-that we can get rid of sunxi_set_gate warning on boot message. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-25clk: renesas: Add support for setting MMCIF clock divider on Gen2Marek Vasut1-0/+42
Add code for configuring the MMC0CKCR/MMC1CKCR on Gen2 platforms. This allows the MMCIF driver to set higher clock rate if desired. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25clk: renesas: Fix swapped div and mul in debug output on Gen2Marek Vasut1-1/+1
The $div and $mul values were swapped in the debug output, fix this. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25clk: renesas: Fix SDH clock divider decoding on Gen2Marek Vasut1-5/+9
The gen2_clk_get_sdh_div() function is supposed to look up the $val value read out of the SDCKCR register in the supplied table and return the matching divider value. The current implementation was matching the value from SDCKCR on the divider value in the table, which is wrong. Fix this and rework the function a bit to make it more readable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-09clk: sunxi: h3: Implement EPHY CLK and RESETJagan Teki1-0/+4
EPHY CLK and RESET is available in Allwinner H3 EMAC via mdio-mux node of internal PHY. Add the respective clock and reset reg and bits. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-09clk: sunxi: Implement EMAC, GMAC clocks, resetsJagan Teki6-0/+15
- Implement EMAC, GMAC clocks via ccu_clk_gate for all supported Allwinner SoCs. - Implement EMAC, GMAC resets via ccu_reset for all supported Allwinner SoCs. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-09clk: sunxi: Implement A10 EMAC clocksJagan Teki2-0/+2
Implement EMAC clocks via ccu_clk_gate for Allwinner A10 SoC. Which would eventually used in sunxi_emac.c driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-04clk: sunxi: Implement SPI clocks, resetsJagan Teki11-0/+97
- Implement SPI AHB, MOD clocks via ccu_clk_gate for all supported Allwinner SoCs - Implement SPI resets via ccu_reset for all supported Allwinner SoCs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-01Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini1-10/+0
- Gen2/Gen3 fixes for warnings and sdhi
2019-02-27clk: Add fixed-factor clock driverAnup Patel2-1/+77
This patch adds fixed-factor clock driver which derives clock rate by dividing (div) and multiplying (mult) fixed factors to a parent clock. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27clk: Add SiFive FU540 PRCI clock driverAnup Patel7-0/+1121
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com> found in commit 999529edf517ed75b56659d456d221b2ee56bb60 of: https://github.com/riscv/riscv-linux Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-25clk: rmobile: Drop def_bool per SoCMarek Vasut1-10/+0
Drop per SoC def_bool on each driver, since this is now implied by SoC Kconfig option instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-09clk: stm32mp1: correctly handle Clock Spreading GeneratorPatrick Delaunay1-1/+7
To activate the csg option, the driver need to set the bit2 of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator of PLLn enable. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: add debug informationPatrick Delaunay1-4/+79
Add support of clk dump command and display information during probe (under CONFIG_DISPLAY_CPUINFO). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: recalculate counter when switching freqPatrick Delaunay1-2/+7
Because stgen is initialized with HSI clock, we need to recalculate the counter when changing frequency. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRRPatrick Delaunay1-8/+5
Remove unnecessary setbits on set/clear registers. Avoid to deactivate HSI with HSE. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: add IPCC clockPatrick Delaunay1-0/+1
Add support for enable/disable of IPCC clock using AHB3 registers Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: no more get ck_usbo_48m in device treePatrick Delaunay1-3/+3
Remove support of ck_usbo_48m clock node in device tree, but force 48MHz frequency to prepare alignment with kernel device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-01rockchip: clk: Add mention of four new clocksSimon Glass1-0/+12
These clocks are needed to get MMC running. We don't actually support setting them yet. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01clk: Improve debug message in clk_set_default_rates()Simon Glass1-2/+2
It is helpful to print the clock number as well as the index, so that this can be looked up in the binding file. Update the debug() statement to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: rk3288: Add i2s pinctrl and clock supportSimon Glass1-0/+48
Add support for setting pinctrl and clock for I2S on rk3288. This allows the sound driver to operate. These settings were created by rkmux.py Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-30sunxi: clk: enable clk and reset for CCU devicesAndre Przywara1-0/+12
Some Allwinner clock devices have parent clocks and reset gates itself, which need to be activated for them to work. Add some code to just assert all resets and enable all clocks given. This should enable the A80 MMC config clock, which requires both to be activated. The full CCU devices typically don't require resets, and have just fixed clocks as their parents. Since we treat both as optional and enabling fixed clocks is a NOP, this works for all cases, without the need to differentiate between those clock types. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com>
2019-01-29sunxi: clk: A80: add MMC clock supportAndre Przywara1-1/+27
The A80 handles resets and clock gates for the MMC devices differently, outside of the CCU IP block. Consequently we have a separate clock device with a separate binding for that. Implement that with the respective clock gates and resets to allow the A80 taking part in the DM_MMC game. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [jagan: fix a80 mmc clock config compatible] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-29sunxi: clk: add MMC gates/resetsAndre Przywara11-0/+63
Add the MMC clock gates and reset bits for all the Allwinner SoCs. This allows them to be used by the MMC driver. We don't advertise the mod clock yet, as this is still handled by the MMC driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [jagan: add V3S, A80 gates/resets] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-18clk: sunxi: Add Allwinner A80 CLK driverJagan Teki3-0/+65
Add initial clock driver for Allwinner A80. - Implement UART bus clocks via ccu_clk_gate table for A80, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement UART bus resets via ccu_reset table for A80, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18clk: sunxi: Add Allwinner H6 CLK driverJagan Teki3-0/+61
Add initial clock driver for Allwinner H6. - Implement UART bus clocks via ccu_clk_gate table for H6, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement UART bus resets via ccu_reset table for H6, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18clk: sunxi: Implement UART resetsJagan Teki7-0/+43
Implement UART resets for all relevant Allwinner SoC clock drivers via ccu reset table. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18clk: sunxi: Implement UART clocksJagan Teki9-0/+57
Implement UART clocks for all Allwinner SoC clock drivers via ccu clock gate table. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18clk: sunxi: Add Allwinner V3S CLK driverJagan Teki3-0/+59
Add initial clock driver for Allwinner V3S. - Implement USB bus and USB clocks via ccu_clk_gate table for V3S, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for V3S, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner R40 CLK driverJagan Teki3-0/+78
Add initial clock driver for Allwinner R40. - Implement USB bus and USB clocks via ccu_clk_gate for R40, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for R40, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A83T CLK driverJagan Teki3-0/+71
Add initial clock driver for Allwinner A83T. - Implement USB bus and USB clocks via ccu_clk_gate table for A83T, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for A83T, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A23/A33 CLK driverJagan Teki3-0/+71
Add initial clock driver for Allwinner A23/A33. - Implement USB bus and USB clocks via ccu_clk_gate table for A23/A33, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for A23/A33, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A31 CLK driverJagan Teki3-0/+76
Add initial clock driver for Allwinner A31. - Implement USB ahb1 and USB clocks via ccu_clk_gate table for A31, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB ahb1 and USB resets via ccu_reset table for A31, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A10s/A13 CLK driverJagan Teki3-0/+64
Add initial clock driver for Allwinner A10s/A13. - Implement USB ahb and USB clocks via ccu_clk_gate table for A10s/A13, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB resets via ccu_reset table for A10s/A13, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 21:23:18 +0300