summaryrefslogtreecommitdiff
path: root/drivers/fastboot/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-09-07drivers: fastboot: Fix the error of writing sparse file with fastbootXingyu Wu1-0/+3
Add config for max block size to write in MMC with sparse file. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2021-02-26fastboot: add UUU command UCmd and ACmd supportHeiko Schocher1-0/+9
add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07fastboot: add command to select the eMMC boot configurationPatrick Delaunay1-0/+7
Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07fastboot: add command to select the default emmc hwpart for bootPatrick Delaunay1-0/+7
Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
2021-02-07fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2Patrick Delaunay1-7/+19
Update the code and the configs for eMMC boot and userdata partitions acces - FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write) - FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0" - FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1" This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORTPatrick Delaunay1-5/+17
Split userdata and boot partition support for eMMC update and correct the description (update is supported). The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-07Revert "fastboot: Add default fastboot_set_reboot_flag implementation"Roman Kovalivskyi1-12/+0
This reverts commit 0ebf9842e56c5b8cb7cb1f990bb452cc14af6225. Current generic implementation of fastboot_set_reboot_flag is somewhat messy and requires some additional configuration option to be enabled besides CMD_BCB, so it reverts that implementtion in order to bring a new cleaner one. Next commit introduces new generic implementation of fastboot_set_reboot_flag. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01fastboot: Add default fastboot_set_reboot_flag implementationRoman Kovalivskyi1-0/+12
Default implementation of fastboot_set_reboot_flag function that depends on "bcb" commands could be used in general case if there are no need to make any platform-specific implementation, otherwise it could be disabled via Kconfig option FASTBOOT_USE_BCB_SET_REBOOT_FLAG. Please note that FASTBOOT_USE_BCB_SET_REBOOT_FLAG is mutually exclusive with some platforms which already have their own implementation of this function. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee1-0/+30
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-04mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal1-2/+2
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-11-23fastboot: rockchip: Fix rk3328 default mmc deviceJagan Teki1-1/+0
Technically the default mmc device for fastboot would use eMMC if the board support for it. Rockchip platform access device 0 for eMMC so, use the same device number for rk3328. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV]Jagan Teki1-1/+3
Select CONFIG_FASTBOOT_FLASH, CONFIG_FASTBOOT_FLASH_MMC_DEV for rockchip SoC plaforms in fastboot Kconfig file instead of defined it in board defconfig. This eventually drop the explicit configs defined in supporting board defconfig files. Tested-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-10-07Kconfig: sandbox: enable cmd_avb and dependenciesJens Wiklander1-0/+2
Enables cmd_avb and its dependencies need to run the AVB tests. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> [trini: Disable for sandbox_noblk] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-30fastboot: Add support for 'oem format' commandAlex Kiernan1-0/+8
Introduce 'oem format' which matches the USB implementation, guard this with CONFIG_FASTBOOT_CMD_OEM_FORMAT so that you can configure it out. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30net: fastboot: Merge AOSP UDP fastbootAlex Kiernan1-0/+7
Merge UDP fastboot support from AOSP: https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Alex Deymo <deymo@google.com> Signed-off-by: Jocelyn Bohr <bohr@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30mmc: Separate "mmc swrite" from fastbootAlex Kiernan1-0/+1
Introduce CONFIG_IMAGE_SPARSE and CONFIG_CMD_MMC_SWRITE so the "mmc swrite" command is separated from the fastboot code. Move image-sparse from common to lib so it's clear it's library code. Rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to CONFIG_IMAGE_SPARSE_FILLBUF_SIZE and migrate it to Kconfig. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to KconfigAlex Kiernan1-0/+7
Add FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig; note there are no in-tree users of it. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30fastboot: Correct dependencies in FASTBOOT_FLASHAlex Kiernan1-13/+4
Ensure that when selecting FASTBOOT_FLASH you end up with a buildable configuration. Prior to this you could select NAND without MTDPARTS and end up with an image which (surprisingly) excluded NAND. Also fix dependencies on FASTBOOT_GPT_NAME/FASTBOOT_MBR_NAME which require you have EFI_PARTITION/DOS_PARTITION enabled. Delete redundant FASTBOOT_FLASH_NAND_DEV from Kconfig - it was only ever used as a guard and the value was ignored in all cases, we're using FASTBOOT_FLASH_NAND as the guard now. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30fastboot: Move fastboot to drivers/fastbootAlex Kiernan1-0/+123
Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot. Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-10 16:56:08 +0300