summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2021-07-26psci: Do not define do_poweroff() if CONFIG_SYSRESET_CMD_POWEROFF is enabledMichal Simek1-1/+1
CONFIG_SYSRESET_CMD_POWEROFF defines do_poweroff() in sysreset-uclass.c that's why don't define it twice when both CONFIG_SYSRESET_CMD_POWEROFF and CONFIG_CMD_POWEROFF are enabled. CONFIG_SYSRESET_CMD_POWEROFF depends on CONFIG_CMD_POWEROFF. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-06dm: define LOG_CATEGORY for all uclassPatrick Delaunay1-0/+2
Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-11firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.Vignesh Raghavendra1-10/+81
On J721e and J7200, MCU R5 core (boot master) itself would run Device Manager (DM) Firmware and interact with TI Foundational Security (TIFS) firmware to enable DMA and such other Resource Management (RM) services. So, during R5 SPL stage there is no such RM service available and ti_sci driver will have to directly interact with TIFS using DM to DMSC channels to request RM resources. Therefore add DT binding and driver for the same. This driver will handle Resource Management services at R5 SPL stage. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210607141753.28796-4-vigneshr@ti.com
2021-06-11firmware: ti_sci: Implement GET_RANGE with static dataVignesh Raghavendra2-0/+128
In case of R5 SPL, GET_RANGE API service is not available (as DM services are not yet up), therefore service such calls locally using per SoC static data. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210607141753.28796-3-vigneshr@ti.com
2021-05-27firmware: ti_sci: Update ti_sci_msg_req_reboot to include domainDave Gerlach2-0/+3
The ti_sci_msg_req_reboot message payload has been extended to include a domain field, but for the purposes of u-boot this should be zero to reset the entire SoC as it did before. Include domain for completeness and set to zero to ensure proper operation. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-24treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún1-1/+1
This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-18psci: rename psci_features functionIgor Opaniuk1-2/+3
s/psci_features/request_psci_features/g for the case when both ARCH_SUPPORT_PSCI=y and ARM_PSCI_FW=y, that leads to these compilation issues: drivers/firmware/psci.c:69:12: error: conflicting types for 'psci_features' 69 | static int psci_features(u32 psci_func_id) | ^~~~~~~~~~~~~ In file included from drivers/firmware/psci.c:23: ./arch/arm/include/asm/system.h:548:5: note: previous declaration of 'psci_features' was here 548 | s32 psci_features(u32 function_id, u32 psci_fid); | ^~~~~~~~~~~~~ Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Fixes: b7135b034f ("psci: add features/reset2 support") Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-05-12firmware: ti_sci: Update ti_sci_cmd_rm_udmap_tx_ch_cfg() API to the latestVignesh Raghavendra2-0/+21
Update struct ti_sci_msg_rm_udmap_tx_ch_cfg_req to latest ABI to support AM64x BCDMA Block copy channels. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-04-29dm: core: Add address translation in fdt_get_resourcePatrick Delaunay1-11/+1
Today of_address_to_resource() is called only in ofnode_read_resource() for livetree support and fdt_get_resource() is called when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required, but the address translation is done by ofnode_read_resource() caller, for example in drivers/firmware/scmi/smt.c::scmi_dt_get_smt_buffer() { ... ret = ofnode_read_resource(args.node, 0, &resource); if (ret) return ret; faddr = cpu_to_fdt32(resource.start); paddr = ofnode_translate_address(args.node, &faddr); ... The both behavior should be aligned and the address translation must be called in fdt_get_resource() and removed for each caller. Fixes: a44810123f9e ("dm: core: Add dev_read_resource() to read device resources") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-20psci: add features/reset2 supportIgor Opaniuk1-0/+68
Adds support for: * PSCI_FEATURES, which was introduced in PSCI 1.0. This provides API that allows discovering whether a specific PSCI function is implemented and its features. * SYSTEM_RESET2, which was introduced in PSCI 1.1, which extends existing SYSTEM_RESET. It provides support for vendor-specific resets, providing reset_type as an additional param. For additional details visit [1]. Implementations of some functions were borrowed from Linux PSCI driver code [2]. [1] https://developer.arm.com/documentation/den0022/latest/ [2] drivers/firmware/psci/psci.c Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-04-13scmi: translate the resource only when livetree is not activatedPatrick Delaunay1-2/+7
Call the translation function on the ofnode_read_resource result only when the livetree is not activated. Today of_address_to_resource() calls ofnode_read_resource() for livetree support and fdt_get_resource() when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required when livetree is activated but this address translation is already done by ofnode_read_resource(). Fixes: 240720e9052f ("firmware: scmi: mailbox/smt agent device") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-13scmi: correctly configure MMU for SCMI bufferPatrick Delaunay1-2/+4
Align the MMU area for SCMI shared buffer on section size; use the ALIGN macro in mmu_set_region_dcache_behaviour call. Since commit d877f8fd0f09 ("arm: provide a function for boards init code to modify MMU virtual-physical map") the parameter of mmu_set_region_dcache_behaviour need to be MMU_SECTION_SIZE aligned. Fixes: 240720e9052f ("firmware: scmi: mailbox/smt agent device") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-13firmware: scmi: fix inline comments and minor coding style issuesEtienne Carriere1-2/+2
Fix inline comments and empty line in scmi driver and test files. Remove test on IS_ENABLED(CONFIG_*_SCMI) in test/dm/scmi.c since these configuration are expected enabled when CONFIG_FIRMWARE_SCMI is enabled in sandbox configuration. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-13firmware: scmi: sandbox test for voltage regulatorEtienne Carriere2-3/+225
Implement sandbox regulator devices for SCMI voltage domains and test them in DM scmi tests. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-13firmware: scmi: voltage regulatorEtienne Carriere1-0/+10
Implement voltage regulators interfaced by the SCMI voltage domain protocol. The DT bindings are defined in the Linux kernel since SCMI voltage domain and regulators patches [1] and [2] integration in v5.11-rc7. Link: [1] https://github.com/torvalds/linux/commit/0f80fcec08e9c50b8d2992cf26495673765ebaba Link: [2] https://github.com/torvalds/linux/commit/2add5cacff3531e54c50b0832128299faa9f0563 Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-03-11scmi: cosmetic: reorder include filesPatrick Delaunay2-3/+2
Reorder include files in expected order. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11scmi: define LOG_CATEGORYPatrick Delaunay6-0/+12
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11scmi: Include device_compat.hPatrick Delaunay1-0/+1
Include the file needed for log function prototype, this patch solves the compilation issue for undefined reference to `dev_err'. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-02-03firmware: smci: possible NULL dereferenceHeinrich Schuchardt1-0/+3
sandbox_scmi_devices_ctx() may return NULL. We should not dereference this value in sandbox_scmi_devices_remove(). The problem was indicated by 'gcc-11 -fanalyzer'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass1-2/+2
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass5-5/+5
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: core: Rename device_bind_ofnode() to device_bind()Simon Glass1-2/+2
This is the standard function to use when binding devices. Drop the '_ofnode' suffix to make this clear. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-27firmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD is calledMichal Simek1-0/+8
Don't know reason but in regular flow addr_hi/low are swapped in ATF. It means when fpga load is done from EL3 there is a need to swap it for PMUFW to load bitstream. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16firmware: scmi: Include device_compat.hSean Anderson3-0/+3
This header is necessary for the dev_xxx macros. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: smci: sandbox test for SCMI reset controllersEtienne Carriere2-6/+151
Add tests for SCMI reset controllers. A test device driver sandbox-scmi_devices.c is used to get reset resources, allowing further resets manipulation. Change sandbox-smci_agent to emulate 1 reset controller exposed through an agent. Add DM test scmi_resets to test this reset controller. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30reset: add reset controller driver for SCMI agentsEtienne Carriere1-0/+4
This change introduces a reset controller driver for SCMI agent devices. When SCMI agent and SCMI reset domain drivers are enabled, SCMI agent binds a reset controller device for each SCMI reset domain protocol devices enabled in the FDT. SCMI reset driver is embedded upon CONFIG_RESET_SCMI=y. If enabled, CONFIG_SCMI_AGENT is also enabled. SCMI Reset Domain protocol is defined in the SCMI specification [1]. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: scmi: sandbox test for SCMI clocksEtienne Carriere3-5/+241
Add tests for SCMI clocks. A test device driver sandbox-scmi_devices.c is used to get clock resources, allowing further clock manipulation. Change sandbox-smci_agent to emulate 3 clocks exposed through 2 agents. Add DM test scmi_clocks to test these 3 clocks. Update DM test sandbox_scmi_agent with load/remove test sequences factorized by {load|remove}_sandbox_scmi_test_devices() helper functions. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30clk: add clock driver for SCMI agentsEtienne Carriere1-3/+11
This change introduces a clock driver for SCMI agent devices. When SCMI agent and SCMI clock drivers are enabled, SCMI agent binds a clock device for each SCMI clock protocol devices enabled in the FDT. SCMI clock driver is embedded upon CONFIG_CLK_SCMI=y. If enabled, CONFIG_SCMI_AGENT is also enabled. SCMI Clock protocol is defined in the SCMI specification [1]. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Lukasz Majewski <lukma@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: scmi: support Arm SMCCC transportEtienne Carriere3-3/+93
This change implements a SMCCC transport for SCMI exchanges. This implementation follows the Linux kernel as references implementation for SCMI message processing, using the SMT format for communication channel meta-data. Use of SMCCC transport in SCMI FDT bindings are defined in the Linux kernel DT bindings since v5.8. SMCCC with SMT is implemented in OP-TEE from tag 3.9.0 [2]. Links: [2] https://github.com/OP-TEE/optee_os/commit/a58c4d706d23 Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: scmi: mailbox/smt agent deviceEtienne Carriere5-2/+333
This change implements a mailbox transport using SMT format for SCMI exchanges. This implementation follows the Linux kernel and SCP-firmware [1] as references implementation for SCMI message processing using SMT format for communication channel meta-data. Use of mailboxes in SCMI FDT bindings are defined in the Linux kernel DT bindings since v4.17. Links: [1] https://github.com/ARM-software/SCP-firmware Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: add SCMI agent uclassEtienne Carriere6-0/+271
This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30firmware: ti_sci: Fix not calling dev_err with a deviceSean Anderson1-7/+16
This converts calls to dev_err to get the device from ti_sci_info where appropriate. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Nishanth Menon <nm@ti.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-23xilinx: drivers: Use '_' instead of '-' in driver nameMichal Simek1-1/+1
The most of drivers are using '_' instead of '-' in driver name. That's why sync up these names to be aligned. It looks quite bad to see both in use. It is visible via dm tree command. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-31firmware: ti_sci: Drop unused structure ti_sci_rm_type_mapLokesh Vutla1-49/+3
struct ti_sci_rm_type_map is no longer used. Drop its definition and its declarations. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-31firmware: ti_sci: drop the device ids to resource id translation tableLokesh Vutla1-11/+1
With ABI 3.0, sysfw deprecated special resource types used for AM65x SoC. Instead started using device id as resource type similar to the convention used in J721E SOC. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-24firmware: psci: Do not bind driver if U-Boot runs in EL3Michal Simek1-0/+6
There is no reason to bind psci driver if U-Boot runs in EL3 because SMC/HVC instructions can't be called. That's why detect this state and don't let user to crash from prompt by performing reset or poweroff commands (if enabled). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: merge firmware calls for EL2 and EL3Ibai Erkiaga1-41/+43
This patch merges ZynqMP firmware calls under xilinx_pm_request in order to make trainsparent the EL. Calls at EL3 are send through IPI messages and EL2 through SMC calls. The EL2 call uses fixed payload and arg size as the EL3 call. The firmware is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the firmware API is limited by the SMC call size. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-05psci: put psci_method in .data section if EFI_LOADER is not enabledYann Gautier1-0/+4
Move the variable psci_method in .data section when EFI is not activated and the psci driver safely access it before relocation. Without this patch the variable is located in .bss section and the psci probe requested before relocation corrupts the device tree (probe is requested by board_f.c::print_resetinfo()). When EFI_LOADER is activated, this variable in already located in the .data.efi_runtime section by __efi_runtime_data. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-24firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object()Michal Simek1-4/+15
There is no need to panic all the time when pmufw config object loading failed. The patch improves function logic to report permission deny case and also panic only for SPL case. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-18firmware: PSCI: Fix PSCI support for OF live treesJon Hunter1-3/+1
When CONFIG_OF_LIVE is enabled, dev_of_offset() cannot be used and if used returns an invalid offset. This causes the call to fdt_stringlist_get() in the psci_probe() to fail to read the 'method' property from the PSCI node for the device and hence prevents PSCI from working. Fix this by using the ofnode_read_string() API instead of the fdt_stringlist_get() because this will handle reading the property both when CONFIG_OF_LIVE is enabled or disabled. Due to the above problem and since commit 81ea00838c68 ("efi_loader: PSCI reset and shutdown") was added, the EFI system reset has been broken for Tegra210 and Tegra196 platforms. This also fixes the EFI system reset for these Tegra platforms. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-05-19common: Drop linux/bitops.h from common headerSimon Glass2-0/+2
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop asm/ptrace.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass3-0/+3
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19command: Remove the cmd_tbl_t typedefSimon Glass1-1/+2
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop net.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-08Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini1-1/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-06firmware: zynqmp: Enable IPI code calling also in EL3Michal Simek1-1/+1
U-Boot proper can still run in EL3 without using firmware interface wired via ATF. For supporting this use case there is a need to check EL level where U-Boot runs and based on that choose the way how to talk to firmware. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-03firmware: tisci: Drop all deprecated messagesLokesh Vutla2-82/+0
SYSFW v2020.01 and later versions no longer supports the below messages: - TI_SCI_MSG_RM_RING_GET_CFG - TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG 0x1206 - TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG 0x1216 - TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232 - TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233 There are no users in U-Boot for any of the above messages, So drop the support for all the corresponding messages. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-06dm: core: Create a new header file for 'compat' featuresSimon Glass1-0/+2
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-18 08:52:14 +0300