summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2022-04-05firmware: firmware-zynqmp: Add zynqmp_pm_set_gem_config apiT Karthik Reddy1-0/+13
Add zynqmp_pm_set_gem_config() api to configure GEM secure registers. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f69e32355c6a6be7d2780663353c52757530207d.1648631275.git.michal.simek@xilinx.com
2022-03-29firmware: zynqmp: Do not bind PD driver in SPL if disabledMichal Simek1-1/+5
Change if condition to cover SPL flow. SPL needs to have CONFIG_SPL_POWER_DOMAIN enabled to be able to bind CONFIG_ZYNQMP_POWER_DOMAIN driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8e1d381013a0ce39d736da166d2b401c4b12d38a.1646064792.git.michal.simek@xilinx.com
2022-03-16Merge tag 'xilinx-for-v2022.07-rc1' of ↵Tom Rini1-0/+51
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.07-rc1 microblaze: - Add support for reserved memory xilinx: - Update FRU code with MAC reading zynqmp: - Remove double AMS setting - DT updates (mostly for SOMs) - Add support for zcu106 rev 1.0 zynq: - Update nand binding nand: - Aligned zynq_nand to upstream DT binding net: - Add support for ethernet-phy-id mmc: - Workaround CD in zynq_sdhci driver also for ZynqMP - Add support for dynamic/run-time SD config for SOMs gpio: - Add driver for slg7xl45106 firmware: - Add support for dynamic SD config power-domain: - Update zynqmp driver with the latest firmware video: - Add skeleton driver for DP and DPDMA i2c: - Fix i2c to work with QEMU pinctrl: - Add driver for zynqmp pinctrl driver
2022-03-09firmware: zynqmp: Add support for set sd config and is function supportedAshok Reddy Soma1-0/+51
Add firmware API's to set SD configuration and to check if a purticular function is supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f64fa2f73e4775e9ad2f4d91339d6c74b43116a3.1645626962.git.michal.simek@xilinx.com
2022-03-03clk: scmi: register scmi clocks with CCFEtienne Carriere1-0/+53
Implements SCMI APIs to retrieve the number exposed SCMI clocks using SCMI_PROTOCOL_ATTRIBUTES messages and the names of the clocks using SCMI_CLOCK_ATTRIBUTES messages. This change updates sandbox SCMI clock test driver to manage these 2 new message IDs. Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Clement Leger <clement.leger@bootlin.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-03firmware: scmi: fix sandbox and related tests for clock discoveryEtienne Carriere1-7/+5
Updates sandbox SCMI clock driver and tests since enabling CCF will mandate clock discovery that is all exposed SCMI clocks shall be discovered at initialization. For this reason, sandbox SCMI clock driver must emulate all clocks exposed by SCMI server, not only those effectively consumed by some other U-Boot devices. Therefore the sandbox SCMI test driver exposes 3 clocks (IDs 0, 1 and 2) and sandbox SCMI clock consumer driver gets 2 of them. Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-03scmi: change parameter dev in devm_scmi_process_msgEtienne Carriere1-2/+15
Changes devm_scmi_process_msg() first argument from target parent device to current SCMI device and lookup the SCMI agent device among SCMI device parents for find the SCMI agent operator needed for communication with the firmware. This change is needed in order to support CCF in clk_scmi driver unless what CCF will fail to find the right udevice related to exposed SCMI clocks. This patch allows to simplify the caller sequence, using SCMI device reference as parameter instead of knowing SCMI uclass topology. This change also adds some protection in case devm_scmi_process_msg() API function is called for an invalid device type. Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-03sandbox: scmi: test against a single scmi agentEtienne Carriere2-119/+54
As per DT bindings since Linux kernel v5.14, the device tree can define only 1 SCMI agent node that is named scmi [1]. As a consequence, change implementation of the SCMI driver test through sandbox architecture to reflect that. This change updates sandbox test DT and sandbox SCMI driver accordingly since all these are impacted. Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini1-0/+71
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-15arm64: zynqmp: Add command for disabling loading other overlaysMichal Simek1-0/+19
Add command "zynqmp pmufw node close" to disable permission to load additional pmufw config overlays. This command will make sure that any other sw will ask for changing permission. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cfa5cc7909eb8deb23eb0f11c26954cbaddeb861.1642163135.git.michal.simek@xilinx.com
2022-02-15xilinx: firmware: Introduce zynqmp_pmufw_node() for loading PMU fragmentsMichal Simek1-0/+32
Introduce zynqmp_pmufw_node() for loading PMU configuration fragment for enabling IPs. Firmware driver has small overlay where NODE id is added and config fragment is sent to PMUFW. There is a need to build PMUFW with fragment support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/636e8150bd4e2b1f988d59795772c685ceeec083.1642163135.git.michal.simek@xilinx.com
2022-02-15power: zynqmp: Add power domain driver for ZynqMPMichal Simek1-0/+20
Driver should be enabled by CONFIG_POWER_DOMAIN=y and CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node but it uses zynqmp firmware DT node that's why there is a need to bind driver when firmware node is found. Driver itself is simple. It is sending pmufw config object overlay for enabling access to device which is done in ...domain_request(). In ...domain_on() capabilities are passed and node is requested. This should be bare minimum of required to get power domain driver working. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com
2022-02-08drivers: dma: Add support for J721S2David Huang1-3/+37
Add support for DMA in J721S2 SoC. Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-01-19Merge tag 'xilinx-for-v2022.04-rc1' of ↵Tom Rini1-1/+11
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc1 gpio: - Add modepin driver net: - Save random mac addresses to eth variable zynqmp gem: - Add support for mdio bus DT description - Add support for reset and SGMII phy configuration - Reduce timeout for MDIO accesses zynqmp clk: - Fix clock handling for gem and usb phy: - Add zynqmp phy/serdes driver serial: - Add one missing compatible string microblaze: - Symbol alignement - SPL fixups - Code cleanups zynqmp: - Various dt changes, DP pre-reloc, gem resets, gem clocks - Switch SOM to shared psu configuration - Move dcache handling to firmware driver - Workaround gmii2rgmii DT description issue - Enable broadcasts again - Change firmware enablement logic - Small adjustement in firmware driver versal: - Support new mmc@ DT nodes - Fix run time variable handling - Add missing I2C_PMC ID for power domain
2022-01-19firmware: zynqmp: Do not report error if node is already configuredMichal Simek1-0/+6
Power domain driver sends PM fragment to PMUFW. It is sent for every node which is listed in DT. But some nodes could be already enabled but driver is not capable to find it out. That's why it blinly sents request for every listed IP. When PMUFW response by XST_PM_ALREADY_CONFIGURED error code there is no need to show any error message because node is already enabled. That's why cover this case with message when DEBUG is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8c15ef0b68cf191f693d3d010f70ac24cfd8171f.1642163135.git.michal.simek@xilinx.com
2022-01-19firmware: zynqmp: Move loading message to debugMichal Simek1-1/+2
Power domain driver is using this function for every IP which is PD listed. This can end up with a lot of messages which end up in boot log. That's why show it only in EL3 as was used in past. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d73fc8bc663110b6e8d5e70fdb6435d1199e9db8.1642163135.git.michal.simek@xilinx.com
2022-01-05xilinx: firmware: Move dcache handling directly to pmufw load configMichal Simek1-0/+3
Core function should make sure that data is stored properly that's why move cache operations directly to zynqmp_pmufw_load_config_object() to be able to call it from other functions. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8c92edd3650ce34a3cfd1c1e4e9103980830b1fa.1637236800.git.michal.simek@xilinx.com
2021-11-29Merge tag 'v2022.01-rc3' into nextTom Rini1-1/+9
Prepare v2022.01-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-23firmware: scmi: Add OP-TEE transportEtienne Carriere3-2/+323
This change implements an SCMI transport for agent interfacing the OP-TEE SCMI service. OP-TEE provides an SCMI PTA (Pseudo-TA) for non-secure world to send SCMI messages over an identified channel. The driver implemented here uses a SMT shared memory for passing messages between client and server. The implementation opens and releases channel resources for each passed SCMI message so that resources allocated (sessions) or registered (shared memory areas) in OP-TEE firmware are released for example before relocation as the driver will likely allocate/register them back when probed after relocation. The integration of the driver using dedicated config switch CONFIG_SCMI_AGENT_OPTEE is designed on the model posted to the U-Boot ML by Patrick Delaunay [1]. Link: [1] https://lore.kernel.org/all/20211028191222.v3.4.Ib2e58ee67f4d023823d8b5404332dc4d7e847277@changeid/ Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: smccc transport: simplify probe sequenceEtienne Carriere1-4/+2
Minor simplification in scmi_smccc_probe() exit sequence. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: smccc transport: use plat data, not priv dataEtienne Carriere1-5/+5
Change SCMI smccc transport drivers to use platform data rather than private data for channel reference since it only stores platform data retrieved from the DT. Consequently the probe handler is replaced with a of_to_plat handler. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: mailbox transport: use plat data, not priv dataEtienne Carriere1-5/+5
Change SCMI mailbox transport drivers to use platform data rather than private data for channel reference since it only stores platform data retrieved from the DT. Consequently the probe handler is replaced with a of_to_plat handler. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: mailbox transport: fix probe failure implementationEtienne Carriere1-5/+1
Correct scmi mailbox probe function that can't free the scmi channel instance since its auto-allocated by the device model framework. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: add configs to select the supported agentsPatrick Delaunay2-2/+18
Add two configs CONFIG_SCMI_AGENT_MAILBOX and CONFIG_SCMI_AGENT_SMCCC to select the supported agents as all the agents are not supported. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-10-21firmware: zynqmp: fix write to an uninitialised pointer in ipi_req()Michal Simek1-0/+4
When a caller is not interested in the returned message, the ret_payload pointer is set to NULL in the u-boot-sources. In this case, under EL3, the memory from address 0x0 would be overwritten by ipi_req() with the returned IPI message, damaging the original data under this address. The patch, in case ret_payload is NULL, assigns the pointer to the array holding the IPI message being sent. Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Adrian Fiergolski <Adrian.Fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/3178ff7651948270b714daa4adad48b94eaca9ba.1634309856.git.michal.simek@xilinx.com
2021-10-21firmware: zynqmp: Handle errors from ipi_req properlyMichal Simek1-1/+5
There are multiple errors what can happen in ipi_req but they are not propagated properly. That's why propage all error properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Adrian Fiergolski <Adrian.Fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/7ac4f3b2104f04c72d287c46d1ccbce20f138fd4.1634309856.git.michal.simek@xilinx.com
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk1-1/+1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-25treewide: Simply conditions with the new OF_REALSimon Glass1-1/+1
Use this new Kconfig to simplify the compilation conditions where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-26psci: Do not define do_poweroff() if CONFIG_SYSRESET_CMD_POWEROFF is enabledMichal Simek1-1/+1
CONFIG_SYSRESET_CMD_POWEROFF defines do_poweroff() in sysreset-uclass.c that's why don't define it twice when both CONFIG_SYSRESET_CMD_POWEROFF and CONFIG_CMD_POWEROFF are enabled. CONFIG_SYSRESET_CMD_POWEROFF depends on CONFIG_CMD_POWEROFF. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-06dm: define LOG_CATEGORY for all uclassPatrick Delaunay1-0/+2
Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-11firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.Vignesh Raghavendra1-10/+81
On J721e and J7200, MCU R5 core (boot master) itself would run Device Manager (DM) Firmware and interact with TI Foundational Security (TIFS) firmware to enable DMA and such other Resource Management (RM) services. So, during R5 SPL stage there is no such RM service available and ti_sci driver will have to directly interact with TIFS using DM to DMSC channels to request RM resources. Therefore add DT binding and driver for the same. This driver will handle Resource Management services at R5 SPL stage. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210607141753.28796-4-vigneshr@ti.com
2021-06-11firmware: ti_sci: Implement GET_RANGE with static dataVignesh Raghavendra2-0/+128
In case of R5 SPL, GET_RANGE API service is not available (as DM services are not yet up), therefore service such calls locally using per SoC static data. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210607141753.28796-3-vigneshr@ti.com
2021-05-27firmware: ti_sci: Update ti_sci_msg_req_reboot to include domainDave Gerlach2-0/+3
The ti_sci_msg_req_reboot message payload has been extended to include a domain field, but for the purposes of u-boot this should be zero to reset the entire SoC as it did before. Include domain for completeness and set to zero to ensure proper operation. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-24treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún1-1/+1
This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-18psci: rename psci_features functionIgor Opaniuk1-2/+3
s/psci_features/request_psci_features/g for the case when both ARCH_SUPPORT_PSCI=y and ARM_PSCI_FW=y, that leads to these compilation issues: drivers/firmware/psci.c:69:12: error: conflicting types for 'psci_features' 69 | static int psci_features(u32 psci_func_id) | ^~~~~~~~~~~~~ In file included from drivers/firmware/psci.c:23: ./arch/arm/include/asm/system.h:548:5: note: previous declaration of 'psci_features' was here 548 | s32 psci_features(u32 function_id, u32 psci_fid); | ^~~~~~~~~~~~~ Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Fixes: b7135b034f ("psci: add features/reset2 support") Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-05-12firmware: ti_sci: Update ti_sci_cmd_rm_udmap_tx_ch_cfg() API to the latestVignesh Raghavendra2-0/+21
Update struct ti_sci_msg_rm_udmap_tx_ch_cfg_req to latest ABI to support AM64x BCDMA Block copy channels. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-04-29dm: core: Add address translation in fdt_get_resourcePatrick Delaunay1-11/+1
Today of_address_to_resource() is called only in ofnode_read_resource() for livetree support and fdt_get_resource() is called when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required, but the address translation is done by ofnode_read_resource() caller, for example in drivers/firmware/scmi/smt.c::scmi_dt_get_smt_buffer() { ... ret = ofnode_read_resource(args.node, 0, &resource); if (ret) return ret; faddr = cpu_to_fdt32(resource.start); paddr = ofnode_translate_address(args.node, &faddr); ... The both behavior should be aligned and the address translation must be called in fdt_get_resource() and removed for each caller. Fixes: a44810123f9e ("dm: core: Add dev_read_resource() to read device resources") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-20psci: add features/reset2 supportIgor Opaniuk1-0/+68
Adds support for: * PSCI_FEATURES, which was introduced in PSCI 1.0. This provides API that allows discovering whether a specific PSCI function is implemented and its features. * SYSTEM_RESET2, which was introduced in PSCI 1.1, which extends existing SYSTEM_RESET. It provides support for vendor-specific resets, providing reset_type as an additional param. For additional details visit [1]. Implementations of some functions were borrowed from Linux PSCI driver code [2]. [1] https://developer.arm.com/documentation/den0022/latest/ [2] drivers/firmware/psci/psci.c Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-04-13scmi: translate the resource only when livetree is not activatedPatrick Delaunay1-2/+7
Call the translation function on the ofnode_read_resource result only when the livetree is not activated. Today of_address_to_resource() calls ofnode_read_resource() for livetree support and fdt_get_resource() when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required when livetree is activated but this address translation is already done by ofnode_read_resource(). Fixes: 240720e9052f ("firmware: scmi: mailbox/smt agent device") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-13scmi: correctly configure MMU for SCMI bufferPatrick Delaunay1-2/+4
Align the MMU area for SCMI shared buffer on section size; use the ALIGN macro in mmu_set_region_dcache_behaviour call. Since commit d877f8fd0f09 ("arm: provide a function for boards init code to modify MMU virtual-physical map") the parameter of mmu_set_region_dcache_behaviour need to be MMU_SECTION_SIZE aligned. Fixes: 240720e9052f ("firmware: scmi: mailbox/smt agent device") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-13firmware: scmi: fix inline comments and minor coding style issuesEtienne Carriere1-2/+2
Fix inline comments and empty line in scmi driver and test files. Remove test on IS_ENABLED(CONFIG_*_SCMI) in test/dm/scmi.c since these configuration are expected enabled when CONFIG_FIRMWARE_SCMI is enabled in sandbox configuration. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-13firmware: scmi: sandbox test for voltage regulatorEtienne Carriere2-3/+225
Implement sandbox regulator devices for SCMI voltage domains and test them in DM scmi tests. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-13firmware: scmi: voltage regulatorEtienne Carriere1-0/+10
Implement voltage regulators interfaced by the SCMI voltage domain protocol. The DT bindings are defined in the Linux kernel since SCMI voltage domain and regulators patches [1] and [2] integration in v5.11-rc7. Link: [1] https://github.com/torvalds/linux/commit/0f80fcec08e9c50b8d2992cf26495673765ebaba Link: [2] https://github.com/torvalds/linux/commit/2add5cacff3531e54c50b0832128299faa9f0563 Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-03-11scmi: cosmetic: reorder include filesPatrick Delaunay2-3/+2
Reorder include files in expected order. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11scmi: define LOG_CATEGORYPatrick Delaunay6-0/+12
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-11scmi: Include device_compat.hPatrick Delaunay1-0/+1
Include the file needed for log function prototype, this patch solves the compilation issue for undefined reference to `dev_err'. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-02-03firmware: smci: possible NULL dereferenceHeinrich Schuchardt1-0/+3
sandbox_scmi_devices_ctx() may return NULL. We should not dereference this value in sandbox_scmi_devices_remove(). The problem was indicated by 'gcc-11 -fanalyzer'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass1-2/+2
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass5-5/+5
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: core: Rename device_bind_ofnode() to device_bind()Simon Glass1-2/+2
This is the standard function to use when binding devices. Drop the '_ofnode' suffix to make this clear. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-18 17:11:28 +0300