summaryrefslogtreecommitdiff
path: root/drivers/mmc/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2022-01-18mmc: actions: add MMC driver for Actions OWL S700/S900Amit Singh Tomar1-0/+1
This commit adds support for MMC controllers found on Actions OWL SoC platform(S700/S900). Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk1-1/+1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-07-07Merge branch '2021-07-06-platform-updates'Tom Rini1-0/+1
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driverJassi Brar1-0/+1
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-06mmc: openpiton: add piton_mmc driverTianrui Wei1-0/+1
This commit adds support to piton_mmc driver for OpenPiton-riscv64 This driver has many things set as preconfigured because the hardware automatically configures most of the settings during startup. Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com> Signed-off-by: Jonathan Balkind <jbalkind@ucsb.edu> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-02-19mmc: pwrseq: add mmc-pwrseq file to provide a generic interfaceJaehoon Chung1-0/+1
Add mmc-pwrseq file to provide a generic interface. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-10-12mmc: sdhci: move the ADMA2 table handling into own moduleMichael Walle1-0/+1
There are other (non-SDHCI) controllers which supports ADMA2 descriptor tables, namely the Freescale eSDHC. Instead of copying the code, move it into an own module. Signed-off-by: Michael Walle <michael@walle.cc>
2020-08-25mmc: Add MMC controller driver for OcteonTX / TX2Suneel Garapati1-0/+1
Adds support for MMC controllers found on OcteonTX or OcteonTX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Cc: Peng Fan <peng.fan@nxp.com>
2020-07-29mmc: add nexell driverStefan Bosch1-0/+1
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - driver changed to DM. - pinctrl-driver/dt is used now instead of configuring the mmc I/O-pins in the mmc-driver. - nexell_dwmmc_ofdata_to_platdata() reworked, i.e. valid default values are used now (where possible) and the appropriate if-blocks have been removed. - new dt-property "mmcboost" is used now instead of "CONFIG_BOOST_MMC" which was not defined anywhere. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-04-22drivers: mmc: rpmb: do not build for SPLHeinrich Schuchardt1-1/+1
RPMB support is used by the 'mmc rpmb' command and by the OP-TEE support. We do not need it in SPL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-09mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCsArthur Li1-0/+1
Initial DesignWare based DM support for Cortina Access CAxxxx SoCs. Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2019-10-10drivers: mmc: Add sdhci driver for Broadcom iProc platformArun Parameswaran1-0/+1
Add SDHCI driver for iProc family of Broadcom devices. Signed-off-by: Corneliu Doban <corneliu.doban@broadcom.com> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Pavithra Ravi <pavithra.ravi@broadcom.com> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
2019-09-05mmc: Add Aspeed SD controller driverEddie James1-0/+1
Add support for the Aspeed SD host controller engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-07-17arm64: dts: k3: Sync sdhci0 node from kernel and change driver nameFaiz Abbas1-1/+1
Sync the sdhci0 node from kernel. This changes the compatible that is required to be there in the driver. Change the same for the SD card node which is not yet supported in kernel. This also syncs the main_pmx0 node as a side effect. Also change the name of the driver to match the compatible in kernel. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-23mmc: split fsl_esdhc driver for i.MXYangbo Lu1-0/+1
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX initially. The later QoriQ series PowerPC processors (which were evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and i.MX series processors were using this driver for their eSDHCs too. For the two series processors, the eSDHCs are becoming more and more different. We should have split it into two drivers, like them (sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel. This patch is just to create a fsl_esdhc_imx driver which is a copy of fsl_esdhc driver for i.MX processors. We will convert i.MX processors to use fsl_esdhc_imx, and clean up the two drivers separately in the future patches. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
2019-04-18ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboardsEugeniy Paltsev1-0/+1
Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys ARC devboards. It is created to switch ARC devboards to use DM_MMC. It required information such as clocks (Bus Interface Unit clock, Card Interface Unit clock) and SDIO bus width. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-19mmc: Add JZ47xx SD/MMC controller driverPaul Burton1-0/+1
Add driver for the JZ47xx MSC controller. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-11-29mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoCWeijie Gao1-0/+1
This patch adds MT7623 host controller driver for accessing SD/MMC. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-11mmc: k3_arasan: Add sdhci driver support for K3 family SoCsLokesh Vutla1-0/+1
AM654 has an arasan sdhci controller and a mmc phy attached to it. Add basic support for K3 specific arasan sdhci controller. Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-07-10board: arm: Add support for Broadcom BCM7445Thomas Fitzsimmons1-0/+1
Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-3/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-14mmc: tmio: Rename Matsushita to TMIOMarek Vasut1-2/+2
Synchronize the naming with Linux, call the common code TMIO. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-12mmc: renesas-sdhi: Add Renesas SDHI Kconfig entryMarek Vasut1-1/+2
Add Kconfig entry for the Renesas SDHI variant of the controller and split the Makefile entries accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-12mmc: uniphier: Split out SoC specific bits from the driverMarek Vasut1-1/+1
Factor out common code from the uniphier SD driver, change the prefix of the functions from uniphier_sd_ to matsu_sd_ and create separate renesas-sdhi.c driver. Thus far, all the code is still compiled when CONFIG_UNIPHIER_MMC is selected and there is no functional change. This patch is a preparation for further split of the SoC specific parts of the Matsushita SD driver, used both on Uniphier and R-Car. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-30mmc: ftsdc010: Merge nds32_mmc to ftsdc010Rick Chen1-1/+0
nsd32_mmc was created to support ftsdc010 dm. It is not necessary to separate both, so merge it to ftsdc010. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-01-28mmc: Add bcm2835 sdhost controllerAlexander Graf1-0/+1
The BCM2835 family of SoCs has 2 different SD controllers: One based on the SDHCI spec and a custom, home-grown one. This patch implements a driver for the latter based on the Linux driver. This is needed so that we can make use of device trees that assume driver presence of both SD controllers. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-12mmc: add a Kconfig option to enable the support for MMC write operationsJean-Jacques Hiblot1-3/+1
This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-11-30nds32: mmc: Support ftsdc010 DM.Rick Chen1-0/+1
Add nds32_mmc to support ftsdc010 dm flow. Signed-off-by: Rick Chen <rick@andestech.com>
2017-09-28mmc: Add MMC support for stm32h7 SocsPatrice Chotard1-0/+1
This patch adds SD/MMC support for STM32H7 SoCs. Here is an extraction of SDMMC main features, embedded in STM32H7 SoCs. The SD/MMC block include the following: _ Full compliance with MultiMediaCard System Specification Version 4.51. Card support for three different databus modes: 1-bit (default), 4-bit and 8-bit. _ Full compatibility with previous versions of MultiMediaCards (backward compatibility). _ Full compliance with SD memory card specifications version 4.1. (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and UHS-II mode not supported). _ Full compliance with SDIO card specification version 4.0. Card support for two different databus modes: 1-bit (default) and 4-bit. (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and UHS-II mode not supported). _ Data transfer up to 208 Mbyte/s for the 8 bit mode. (depending maximum allowed IO speed). _ Data and command output enable signals to control external bidirectional drivers. The current version of the SDMMC supports only one SD/SDIO/MMC card at any one time and a stack of MMC Version 4.51 or previous. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01dm: mmc: Allow disabling driver model in SPLSimon Glass1-2/+2
At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05samsung: mmc: Drop s3c_sdi driverSimon Glass1-1/+0
This is no-longer used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-05-15mmc: descend into drivers/mmc only when CONFIG_MMC is enabledMasahiro Yamada1-16/+12
This simplifies makefiles. Also, arrange the order of objects in drivers/mmc/Makefile so that the framework objects are listed before drivers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMCMasahiro Yamada1-5/+5
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18drivers: remove Blackfin specific driversMasahiro Yamada1-1/+0
These drivers have no user since commit ea3310e8aafa ("Blackfin: Remove"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-04-14mmc: meson: add MMC driver for Meson GX (S905)Carlo Caione1-0/+1
This driver implements MMC support on Meson GX (S905) based systems. It's based on Carlo Caione's work, changes: - BLK support added - general refactoring Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2017-03-21mmc: tangier: Add Intel Tangier eMMC/SDHCI driverFelipe Balbi1-0/+1
This patch adds Intel Tangier eMMC/SDHCI driver. Intel Tangier SoC contains a hybrid of PCI and non-PCI devices. SDHCI controller is one of the devices which are *not* on a PCI and, hence, cannot be enumerated by standard PCI means. This driver, allows for SDHCI controller on Tangier SoC to work in U-Boot. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-03-21mmc: pci: Add CONFIG_MMC_PCIFelipe Balbi1-1/+1
We don't want pci_mmc to compile every time x86 compiles, only when there's a platform that needs it. For that reason, we're adding a new CONFIG_MMC_PCI which platforms can choose to enable. Suggested-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-03-15STiH410: Add STi SDHCI driverPatrice Chotard1-0/+1
Add SDHCI host controller found on STMicroelectronics SoCs On some ST SoCs, i.e. STiH407/STiH410, the MMC devices can live inside a dedicated flashSS sub-system that provides an extend subset of registers that can be used to configure the Arasan MMC/SD Host Controller. This means, that the SDHCI Arasan Controller can be configured to be eMMC4.5 or 4.3 spec compliant. W/o these settings the SDHCI will configure and use the MMC/SD controller with limited features e.g. PIO mode, no DMA, no HS etc. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-02-09mmc: ftsdc021_sdhci: remove the ftsdc021_sdhci.cJaehoon Chung1-1/+0
ftsdc021_sdhci.c is dead file. There is no reason to maintain this host controller. Removes the entire ftsdc021_sdhci.c. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-31mmc: atmel: rename CONFIG_ATMEL_SDHCI to CONFIG_MMC_SDHCI_ATMELMasahiro Yamada1-1/+1
Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. While we are here, add "depends on ARCH_AT91". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-31mmc: pic32: rename CONFIG_PIC32_SDHCI to CONFIG_MMC_SDHCI_PIC32Masahiro Yamada1-1/+1
Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-31mmc: msm: rename CONFIG_MSM_SDHCI to CONFIG_MMC_SDHCI_MSMMasahiro Yamada1-1/+1
Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-31mmc: rockchip: rename CONFIG_ROCKCHIP_SDHCI to CONFIG_MMC_SDHCI_ROCKCHIPMasahiro Yamada1-1/+1
Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. While we are here, add "depends on ARCH_ROCKCHIP". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-31mmc: zynq: rename CONFIG_ZYNQ_SDHCI to CONFIG_MMC_SDHCI_ZYNQMasahiro Yamada1-1/+1
Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. While we are here, add "depends on ARCH_ZYNQ || ARCH_ZYNQMP". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-31mmc: sandbox: rename CONFIG, fix dependency, and use it in MakefileMasahiro Yamada1-5/+1
[1] Rename CONFIG_SANDBOX_MMC to CONFIG_MMC_SANDBOX for consistency I want all MMC driver options prefixed with CONFIG_MMC_. [2] Fix dependency Add necessary depends on to avoid compile error. Instead "depends on MMC" is unneeded because this config entry resides inside of "if MMC". [3] Currently, this config symbol is not referenced at all. Use it to enable/disable the driver in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-25mmc: Add Marvell Xenon SDHCI controller driverStefan Roese1-0/+1
This driver implementes platform specific code for the Xenon SDHCI controller which is integrated in the Marvell MVEBU Armada 37xx and Armada 7k / 8K SoCs. History: This driver is ported from the Marvell U-Boot version 2015.01 which is written by Victor Gu <xigu@marvell.com> with minor changes ported from the Linux driver which is written by Ziji Hu <huziji@marvell.com>. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-01-11mmc: move more driver config options to KconfigMasahiro Yamada1-7/+9
Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11mmc: move DesignWare-based drivers to KconfigMasahiro Yamada1-5/+5
Move (and rename) the following CONFIG options to Kconfig: CONFIG_EXYNOS_DWMMC (renamed to CONFIG_MMC_DW_EXYNOS) CONFIG_HIKEY_DWMMC (renamed to CONFIG_MMC_DW_K3) CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA) The "HIKEY" is a board name, so it is not suitable for the MMC controller name. I am following the name used in Linux. This commit was generated as follows: [1] Rename the config options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g ' [2] Commit the changes [3] Create the entries in drivers/mmc/Kconfig (with default y for EXYNOS and SOCFPGA) [4] Run the following: tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA [5] Sort and align drivers/mmc/Makefile for readability [6] Clean-up doc/README.socfpga by hand Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DWMasahiro Yamada1-1/+1
This commit was created as follows: [1] Rename the option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g' [2] create the entry for MMC_DW in drivers/mmc/Kconfig (the prompt and help were copied from Linux) [3] run "tools/moveconfig.py -y MMC_DW" [4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry [5] Clean-up doc/README.socfpga by hand Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11mmc: rename CONFIG_ROCKCHIP_DWMMC to CONFIG_MMC_DW_ROCKCHIPMasahiro Yamada1-1/+1
I am trying to make all DesignWare-based driver options prefixed with CONFIG_MMC_DW_. This commit was generated as follows: find . -name .git -prune -o -type f -print | \ xargs sed -i -e 's/ROCKCHIP_DWMMC/MMC_DW_ROCKCHIP/g' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 07:19:12 +0300