summaryrefslogtreecommitdiff
path: root/drivers/pci/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22pci: Add Starfive JH7110 pcie driverMason Huo1-0/+12
Port the JH7110 pcie host driver from linux kernel. Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
2021-09-14pci: Drop DM_PCISimon Glass1-37/+3
This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-19pci: Require DM_PCITom Rini1-4/+5
As the migration deadline has passed, require that DM_PCI be used. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18dm: pci: add option to map virtual system memory base addressDaniel Schwierzeck1-0/+13
On MIPS the DRAM start address respectively CONFIG_SYS_SDRAM_BASE is still used as a virtual, CPU-mapped address instead of being used as physical address. Converting all MIPS boards and generic MIPS code to fix that is not trivial. Due to the approaching deadline for PCI DM conversion, this workaround is required for MIPS boards with PCI support until the CONFIG_SYS_SDRAM_BASE issue could be solved. Add a compile-time option to let the PCI uclass core optionally map the DRAM address to a physical address when adding the PCI region of type PCI_REGION_SYS_MEMORY. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-14pci: uniphier: Add UniPhier PCIe controller driverKunihiko Hayashi1-0/+10
Add PCIe driver for UniPhier SoCs. This PCIe controller is based on Synopsys DesignWare Core IP. This version doesn't apply common DW functions because supported controller doesn't have unroll version of iATU. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-07-06pci: synquacer: Add SynQuacer ECAM based PCIe driverMasami Hiramatsu1-0/+12
Add ECAM based SynQuacer PCIe RC driver. This driver configures the PCIe RC and filter out a ghost pcie config. Since the Linux kernel expects "socionext,synquacer-pcie-ecam" device is configured by firmware (EDK2), it doesn't re-configure in the kernel. So as same as EDK2, U-Boot needs to configure it before boot the kernel. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-05-31drivers: pci: add pcie support for fu740Green Wan1-0/+10
Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration. Several devices are tested: a) M.2 NVMe SSD b) USB-to-PCI adapter c) Ethernet adapter (E1000 compatible) Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-23mips: octeon: Add Octeon PCIe host controller driverStefan Roese1-0/+6
This patch adds the PCIe host controller driver for MIPS Octeon II/III. The driver mainly consist of the PCI config functions, as all of the complex serdes related port / lane setup, is done in the serdes / pcie code available in the "arch/mips/mach-octeon" directory. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-15pci: add Amlogic Meson Designware PCIe controllerNeil Armstrong1-0/+8
Add support for the DW PCIe controller found in the Amlogic Meson AXG and G12 (G12A, G12B, SM1) SoCs. This uses the common DW PCIe helpers introducted previously. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-15pci: pcie_dw_rockchip: migrate to common Designware PCIe functionsNeil Armstrong1-1/+1
Migrate the dw_rockchip driver to use the common DW PCIe helpers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-15pci: pcie_dw_ti: migrate to common Designware PCIe functionsNeil Armstrong1-1/+1
Migrate the dw_ti driver to use the common DW PCIe helpers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-15pci: add common Designware PCIe functionsNeil Armstrong1-0/+4
With the introduction of pcie_dw_rockchip, and need to support the DW PCIe in the Amlogic AXG & G12 SoCs, most of the DW PCIe helpers would be duplicated. This introduce a "common" DW PCIe helpers file with common code merged from the dw_ti and dw_rockchip drivers and adapted to fit with the upcoming dw_meson. The following changes will switch the dw_ti and dw_rockchip to use these helpers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Green Wan <green.wan@sifive.com> [bmeng: remove the blank line at EOF of drivers/pci/pcie_dw_common.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-02-08pci: kconfig: layerscape: Change LX2162A PCIe node compatible stringHou Zhiqiang1-2/+3
LX2162A is not like LX2160A which has different PCIe controller in rev1 and rev2 silicon. It supports only one configuration of PCIe controller, which is same as LS2088A. So update PCIe compatible string same as LS2088A. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-01-21pci: Add Rockchip dwc based PCIe controller driverShawn Lin1-0/+9
Add Rockchip dwc based PCIe controller driver for rk356x platform. Driver support Gen3 by operating as a Root complex. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-12-10armv8: lx2162a: Add Soc changes to support LX2162AMeenakshi Aggarwal1-2/+2
LX2162 is LX2160 based SoC, it has same die as of LX2160 with different packaging. LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module, microSD card, eMMC support, serial console, qspi nor flash, qsgmii, sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes interface to support three PCIe gen3 interface. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Fixed whitespace errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23pci: layerscape: add a way of specifying additional iommu mappingsLaurentiu Tudor1-0/+12
In the current implementation, u-boot creates iommu mappings only for PCI devices enumarated at boot time thus does not take into account more dynamic scenarios such as SR-IOV or PCI hot-plug. Add an u-boot env var and a device tree property (to be used for example in more static scenarios such as hardwired PCI endpoints that get initialized later in the system setup) that would allow two things: - for a SRIOV capable PCI EP identified by its B.D.F specify the maximum number of VFs that will ever be created for it - for hot-plug case, specify the B.D.F with which the device will show up on the PCI bus More details can be found in the included documentation: arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-08-31arm64: a37xx: pci: Depends on DM_GPIOPali Rohár1-0/+1
For proper initialization of aardvark pci driver it is required to de-assert reset GPIO. So depeneds on DM_GPIO option. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-27pci: kconfig: Setup proper dependency for PCIE_ROCKCHIPMichal Simek1-0/+1
There is missing dependency for PCIE_ROCKCHIP which selects PHY_ROCKCHIP_PCIE which directly depends on ARCH_ROCKCHIP. WARNING: unmet direct dependencies detected for PHY_ROCKCHIP_PCIE Depends on [n]: ARCH_ROCKCHIP [=n] Selected by [y]: - PCIE_ROCKCHIP [=y] && PCI [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-25pci: Add PCI controller driver for OcteonTX / TX2Suneel Garapati1-0/+8
Adds support for PCI ECAM/PEM controllers found on OcteonTX or OcteonTX2 SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-25pci: pci-uclass: Add support for Alternate-RoutingID capabilitySuneel Garapati1-0/+9
If ARI capability is found on device, use it to update next function number in bus scan and also helps to skip unnecessary bdf scans. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-25pci: pci-uclass: Add support for Single-Root I/O VirtualizationSuneel Garapati1-0/+10
SR-IOV - Single Root I/O Virtualization PF - Physical Function VF - Virtual Function If SR-IOV capability is present, use it to initialize Virtual Function PCI device instances. pci_sriov_init function will read SR-IOV registers to create VF devices under the PF PCI device and also bind driver if available. This function needs to be invoked from Physical function device driver which expects VF device support, creating minimal impact on existing framework. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-25pci: pci-uclass: Add multi entry support for memory regionsSuneel Garapati1-0/+10
Enable PCI memory regions in ranges property to be of multiple entry. This helps to add support for SoC's like OcteonTX/TX2 where every peripheral is on PCI bus. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-14drivers: pcie: add Broadcom IPROC PCIe RC driverSrinath Mannam1-0/+7
Add support for IPROC PAXC PCIe RC driver. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-27pci: layerscape: Add specific config entry for RC and EP mode driverHou Zhiqiang1-6/+23
Add Root Complex and Endpoint mode specific config entries, such that it's feasible to enable the RC and/or EP mode driver indepently. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-22pci: rockchip: Switch to generic-phyJagan Teki1-0/+1
Now, we have a PCIe PHY driver as part of the Generic PHY framework. Let's use it instead of legacy PHY driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-10pci: Add driver for Broadcom BCM2711 SoC PCIe controllerSylwester Nawrocki1-0/+9
This patch adds basic driver PCI Express controller found on Broadcom set-top-box SoCs, e.g. BCM2711. The code is based on Linux upstream driver (pcie-brcmstb.c) with MSI handling removed. The inbound access memory region is not currently parsed from dma-ranges DT property and a fixed 3GB region is used. The patch has been tested on RPI4 board, i.e. on BCM2711 SoC with VL805 USB Host Controller. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-22pci: Add Rockchip PCIe controller driverJagan Teki1-0/+8
Add Rockchip PCIe controller driver for rk3399 platform. Driver support Gen1 by operating as a Root complex. Thanks to Patrick for initial work. Signed-off-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
2020-05-15rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner1-1/+1
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-01-02pci: layerscape: Manage PCIe EP compatible string via KconfigPankaj Bansal1-0/+9
The ep node device tree name is governed by these bindings: https://github.com/torvalds/linux/blob/master/Documentation/ devicetree/bindings/pci/layerscape-pci.txt#L24 As per above the ep compatible node contains platform name. Therefore, define the ep node compatible as CONFIG to find the pcie ep node in device tree during device tree fixup. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-02pci: layerscape: move PCIE related CONFIG to PCI KconfigPankaj Bansal1-0/+15
move the PCIE related config from arch Kconfig to PCI Kconfig. As the PCI_LAYERSCAPE driver is being used in platform other than fsl-layerscape platforms like ls102xa. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08arm: add initial support for the Phytium Durian Boardliu hao1-0/+7
This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-06pci: add DM based mpc85xx driverHeiko Schocher1-0/+7
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-11pci: mediatek: add PCIe controller support for MT7623Ryder Lee1-0/+8
This adds PCIe controller support for MT7623. This is adapted from the Linux version. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-08-12pcie: ti: add driver for AM65x PCIe RCSekhar Nori1-0/+6
Add driver supporting PCIe root-complex available on TI's AM65x SoC. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-20dm: pci: add Freescale PowerPC PCIe driverHou Zhiqiang1-0/+8
Add PCIe DM driver for Freescale PowerPC PCIe controllers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-27Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini1-0/+8
- Gen3 PCIe driver + enablement on Salvator-X platforms. - Gen3 recovery SPL used to reload ATF/OpTee/U-Boot instead of minimon. - SDHI HS400 fixes ported from latest BSP and datasheet.
2019-05-22pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCsHou Zhiqiang1-0/+8
Add PCIe Gen4 driver for the NXP Layerscape SoCs. This PCIe controller is based on the Mobiveil IP, which is compatible with the PCI Express™ Base Specification, Revision 4.0. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bao Xiaowei <Xiaowei.Bao@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-21pci: renesas: Add RCar Gen3 PCIe controller driverMarek Vasut1-0/+8
Add driver for the Renesas RCar PCIe controller present on Gen3 SoCs. The PCIe on Gen3 is used both to connect external PCIe peripherals. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-05pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfigStefan Roese1-0/+9
This patch adds DM_PCI support to the MVEBU PCIe driver. This is necessary, since all PCI drivers have to be moved to DM (driver model) until the v2019.07 release. To not break git bisect'ablility, this patch also moves CONFIG_PCI_MVEBU from config headers to the defconfig files. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Phil Sutter <phil@nwl.cc> Cc: Marek Behún <marek.behun@nic.cz> Cc: VlaoMao <vlaomao@gmail.com>
2018-05-08pci: intel: Add Intel FPGA PCIe controller driverLey Foon Tan1-0/+7
Add PCIe driver for Intel FPGA PCIe IP. This driver operates the PCIe IP in rootport mode only, the EP mode is not supported. The driver is tested with the Intel e1000e NIC driver. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-03-30arm64: a37xx: pci: add support for aardvark pcie driverWilson Ding1-0/+10
This patch introduced the Aardvark PCIe driver based driver model. The PCIe driver is supposed to work in Root Complex mode. It only supports X1 lane width. Signed-off-by: Wilson Ding <dingwei@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/38725 Reviewed-by: Victor Gu <xigu@marvell.com> Reviewed-by: Hua Jing <jinghua@marvell.com> Tested-by: Hua Jing <jinghua@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-27pci: rmobile: Add RCar Gen2 PCIe controller driverMarek Vasut1-0/+9
Add driver for the Renesas RCar PCIe controller present on Gen2 SoCs. The PCIe on Gen2 is used both to connect external PCIe peripherals as well as access the on-SoC USB EHCI controller. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2017-10-06PCI: Add driver for a 'pci-host-ecam-generic' host controllerTuomas Tynkkynen1-0/+8
QEMU emulates such a device with '-machine virt,highmem=off' on ARM. The 'highmem=off' part is required for things to work as the PCI code in U-Boot doesn't seem to support 64-bit BARs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-22pci: Remove unnecessary 'default n' from KconfigTuomas Tynkkynen1-1/+0
'default n' is the default anyway so it doesn't need to be specified explicitly, and the rest of the file doesn't specify it either anywhere. Drop it. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-01x86: kconfig: Select PCI and DM_PCIBin Meng1-1/+1
PCI is the de facto interconnect bus in an x86 system. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-18pci: layerscape: add pci driver based on DMMinghuan Lian1-0/+8
There are more than five kinds of Layerscape SoCs. unfortunately, PCIe controller of each SoC is a little bit different. In order to avoid too many macro definitions, the patch addes a new implementation of PCIe driver based on DM. PCIe dts node is used to describe the difference. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-03pci: kconfig: fix spelling in descriptionMarcel Ziswiler1-1/+1
Fix 'driver model' rather than 'driver mode' in description. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-12-05pci: mvebu: Add PCIe driver for Armada-8KShadi Ammouri1-0/+10
This patch adds a driver for the PCIe controller integrated in the Marvell Armada-8K SoC. This controller is based on the DesignWare IP core. The original version was written by Shadi and Yehuda. I ported this driver to the latest mainline U-Boot version with DM support. Tested on the Marvell DB-88F8040 Armada-8K eval board. Signed-off-by: Shadi Ammouri <shadi@marvell.com> Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2016-10-28pci: Move CONFIG_PCI_PNP to KconfigBin Meng1-0/+7
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Re-generate configs and include/configs/ changes] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-28drivers/pci/Kconfig: Add PCITom Rini1-2/+10
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 05:10:05 +0300