summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2019-04-24Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-bootTom Rini1-0/+1
STM32 MCUs update: - DT rework and alignment with DT kernel v4.20 - mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20 - mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20 - configs: update for F746/769 boards
2019-04-24Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogicTom Rini6-184/+1491
- Add support for Amlogic p200 & p201 Reference Designs - Add Amlogic SoC information display - Add support for the Libretech-AC AML-S805X-AC board - Add Amlogic AXG reset compatible - Add I2C support for Amlogic AXG - Fix AXG PIN and BANK pinctrl definitions - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset - Add initial support for Amlogic G12A SoC and U200 board - Enable PHY_REALTEK for selected boards - Fix Khadas VIM2 README
2019-04-24pinctrl: add driver for MT8516Fabien Parent3-0/+396
Add Pinctrl driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23pinctrl: stm32: Add st,stm32f769-pinctrl compatible stringPatrice Chotard1-0/+1
Due to DT kernel synchronisation, add new pinctrl compatible string for stm32f769. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23pinctrl: meson: add g12a supportJerome Brunet5-5/+1312
Add pinctrl support for the Amlogic G12A SoC, which is very similar to the Amlogic AXG support but with an additionnal drive-strength register bank. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-13Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dmTom Rini1-26/+10
fdtdec tests and improvements for carve-outs pinctrl race-condition fix various other fixes in sandbox, sound, mkimage, etc.
2019-04-13Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mipsTom Rini1-1/+1
- mt76xx: add USB support, small fixes - ath79: small fixes, add support for QCA9563 SoC and AP152 reference board - mscc: small fixes, add network support for JR2 and ServalT SoCs - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs - MIPS: fix redundant relocation of initrd images
2019-04-12Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-bootTom Rini3-0/+451
stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
2019-04-12drivers: fix typo for pinctrl qca953xRosy Song1-1/+1
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-12pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driverPatrick Delaunay3-0/+451
This patch adds pinctrl/GPIO driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander. STMFX is an I2C slave controller, offering up to 24 GPIOs. The driver relies on UCLASS_PINCTRL and UCLASS_GPIO. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()Patrick Delaunay1-0/+3
Some binding define child node gpio-controller without compatible property. This patch avoid to bind the pinconfig uclass to these node. For example, the binding for st,stm32-pinctrl (./device-tree-bindings/pinctrl/st,stm32-pinctrl.txt) defines the GPIO controller/bank node as sub-node of pincontrol (st,stm32f429-pinctrl) but without compatible (as it is not mandatory). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-12dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRLPatrice Chotard1-4/+7
In case of system with several pin-controller device, probe the first UCLASS_PINCTRL by seq number (defined by alias) to avoid race condition with I2C PINCONTROL driver for GPIO expander (GPIO expander need I2C bus, I2C driver need PINCONFIG). Signed-off-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-12dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().Christoph Muellner1-22/+0
This reverts commit 5ff776889212c080e3d1a33634ac904405ed6845. As noted in the comment, the function pinctrl_decode_pin_config_dm() only served as a temporary solution. Since the function has no users anymore, we can remove it again. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-11Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini14-1566/+8602
- Various rmobile fixes
2019-04-10pinctrl: meson: axg: Fix PIN and BANK offsetsGuillaume La Roque1-179/+179
Periphs bank offset must be applied on all pins and PMX bank to prevent issue in meson_pinconf_set call. Without offset on pins when a call to pinconf is done meson_gpio_calc_reg_and_bit return wrong offset. To avoid breaking pmx function offset is needed in pmx bank structure too. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-09pinctrl: renesas: Synchronize Gen3 tables with Linux 5.0Marek Vasut7-1496/+2511
Synchronize R-Car Gen3 pin control tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09pinctrl: renesas: Synchronize Gen2 tables with Linux 5.0Marek Vasut3-62/+81
Synchronize R-Car Gen2 pin control tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09pinctrl: renesas: Add TDSEL fixup for H2/E2 ES1.0 SoCsMarek Vasut2-0/+22
Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783, has a TDSEL fix for R8A7790 H2 and R8A7794 E2 SoCs, implement similar fix for U-Boot. The difference here is that the SoC ES matching has to be implemented manually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09pinctrl: renesas: Add R8A77965 pin control tablesMarek Vasut5-11/+5991
Add pin control tables for R8A77965 from Linux 5.0 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09pinctrl: at91: add slewrate support for SAM9X60Claudiu Beznea1-0/+34
Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2019-04-09pinctrl: at91: add compatibles for SAM9X60 pin controllerClaudiu Beznea1-0/+1
Add compatibles for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2019-04-09pinctrl: at91: add drive strength support for SAM9X60Claudiu Beznea1-0/+34
Add drive strength support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2019-04-09pinctrl: at91: add option to use drive strength bitsClaudiu Beznea1-5/+10
SAM9X60 uses high and low drive strengths. To implement this, in at91_pinctrl_mux_ops::set_drivestrength we need bit numbers of drive strengths (1 for low, 2 for high), thus change the code to allow the usage of drive strength bit numbers. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2019-03-29pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrlDavid Wu3-13/+76
There are no higher 16 writing corresponding bits for pmu_gpio0's iomux/drive/pull at rk3288, need to read the value from register firstly. Add the flag to distinguish it from normal registers. Signed-off-by: David Wu <david.wu@rock-chips.com>
2019-03-13pinctrl: add imx8m driverPeng Fan3-0/+51
Add i.mx8m pinctrl driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-03-04pinctrl: renesas: r8a77990: Reivse USB ID pin nameHiroyuki Yokoyama1-3/+3
Since the datasheet Rev.1.00 has an error about the USB ID pin name, this patch revises it. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0Hiroyuki Yokoyama1-2/+2
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50, the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is selected, and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is selected. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_NHiroyuki Yokoyama1-2/+2
According to the R-Car Gen3 Hardware Manual Rev.1.50, the MOD_SEL0 bit16 is set to 0 when NFALE_A and NFRB_N_A pin functions are selected. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2,TX2 and SCK2Hiroyuki Yokoyama1-5/+5
According to the R-Car Gen3 Hardware Manual Rev 1.50, the MOD_SEL0 bit2 is set when RX2_{A,B}, TX2_{A,B} and SCK2_A pin functions are selected. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_xHiroyuki Yokoyama1-17/+17
This patch fixes the allocation name "RTSx_N_TANS_x" of IPSR / MOD_SEL0/1 of r8a77990 to "RTSx_N_x". This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Fix r8a779{6,65} rename sel_ndfc to sel_ndfHiroyuki Yokoyama1-11/+11
This patch fixes the allocation name "sel_ndfc" of MOD_SEL2[22] of r8a7796 / r8a77965 to "sel_ndf". This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Remove r8a779{5,6,65} CC5_OSCOUT of IP17Hiroyuki Yokoyama2-4/+2
This patch removes CC5_OSCOUT assignment of IP17[3:0] of r8a7795 / r8a7796 / r8a77965. This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Fix r8a779{5,6,65} rename sel_adg_ to sel_adgHiroyuki Yokoyama2-20/+20
This patch fixes to the correct names, and "_" is not include after "adg" for r8a7795/r8a7796/r8a77965. This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Fix r8a779{5,6,65} assign to GP7_03/02 of GPSR7Hiroyuki Yokoyama2-39/+58
This patch is change the bit assignment of "HDMI1_CEC" to "GP7_03", and "HDMI0_CEC" to "GP7_02". This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-25pinctrl: renesas: Drop def_bool per SoCMarek Vasut1-10/+0
Drop per SoC def_bool on each driver, since this is now implied by SoC Kconfig option instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-01pinctrl: Kconfig: fix missing include of rockchip/KconfigPhilipp Tomsich1-0/+1
After the merge of the new, generic pinctrl-code, the include for rockchip/Kconfig was missing. Add it here, so we can select the pinctrl-driver for SPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01pinctrl: Kconfig: sort includes alphabeticallyPhilipp Tomsich1-5/+5
To make adding new subdirectories easier, let's enforce alphabetical ordering of the includes of Kconfig files in the respective subdirectories. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01pinctrl: rockchip: Clean the unused rockchip pinctrl driversDavid Wu9-6387/+0
If we used the pinctrl-rockchip driver, these code is not needed, so remove them. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01pinctrl: rockchip: Add common rockchip pinctrl driverDavid Wu15-100/+2531
Use this driver to fit all Rockchip SOCs and to support the desired pinctrl configuration via DTS. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: rk3288: Add i2s pinctrl and clock supportSimon Glass1-0/+14
Add support for setting pinctrl and clock for I2S on rk3288. This allows the sound driver to operate. These settings were created by rkmux.py Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-30Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imxTom Rini1-1/+2
For 2019.04
2019-01-29pinctrl: meson: add pinconf supportJerome Brunet5-7/+123
Adding pinconf support is necessary to enable boot from SPI without breaking the eMMC. When booting from SPI, the ROM code leave pull downs on the eMMC pad. We need to set pinconf provided in DT to solve this Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added missing comma in pinctrl-meson-axg-pmx.c]
2019-01-28pinctrl: imx: Fix select input issueYe Li1-1/+2
The pinctrl supports to set any bit in input register on iMX6 if the MSB of input value is 0xff. But the driver uses signed int for input value, so when executing the codes below, it won't meet. Because this is arithmetic right shift. if (input_val >> 24 == 0xff) Fix the issue by changing the input_val, config_val and mux_mode to u32. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-23pinctrl: mscc: Add gpio and pinctrl for Serval SoC family.Horatiu Vultur3-0/+244
The Serval SoC family has 32 pins. Currently there is no support for Serval in Linux kernel. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family.Horatiu Vultur3-0/+279
The Servalt SoC family has 36 pins. Currently there is not support for Servalt pinctrl in Linux kernel. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-18pinctrl: Kconfig: spelling fixesChris Packham1-1/+1
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC familyHoratiu Vultur7-29/+443
The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common to support new numbe of pins and remove any platform dependency from mscc-common. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-11Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before ↵Lukasz Majewski1-2/+2
relocation" This reverts commit a7f4b4b344396590845e6552c82829ef68ef9f89. As reported by Alex Kiernan the above optimization introduces a regression in the below use case where: 1. Device has defined 'u-boot,dm-spl' property (@ eMMC DTS node) 2. The device downloads its MLO/SPL via UART (not eMMC - the eMMC pinmux pins are NOT probed/configured in MLO/SPL). 3. The loaded via UART MLO/SPL wants to load Linux from eMMC. In this case the DM core and pinctrl uclass checks 'u-boot,dm-spl' and don't configure pins (as it thinks that those were initialized in MLO/SPL). As we are very close to release - please revert this commit. Reported-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-06rockchip: rk3399: fix missing braces in full pinctrlPhilipp Tomsich1-2/+3
Braces around the error-case for rk3399_pinctrl_set_pin_pupd lead to an unconditional (and unintended) return from the function without it ever setting pin-configurations. Fix it. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-03rockchip: rk3399: Add Kconfig option for full pinctrl driverChristoph Muellner2-0/+19
This patch adds a Kconfig option to enable the full pinctrl driver for the RK3399. This flag needs to be enabed in order to get the features of the full pinctrl driver compiled in (i.e. a .set_state() callback). Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-17 14:39:49 +0300