summaryrefslogtreecommitdiff
path: root/drivers/power/pmic/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-08-19sysreset: move stm32mp sysreset poweroff implementation to sysreset uclassUrja Rannikko1-0/+1
This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF to signal when we need it. Enable it from the STPMIC1 config and in sandbox. The config flag is transitionary, that is it can be removed after all poweroff implementations use sysreset, and just have CMD_POWEROFF depend on sysreset. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-13power: pmic: Kconfig: Add SPL_PMIC configs for palmas/lp873x/lp87565Keerthy1-0/+21
Add SPL_PMIC configs for palmas/lp873x/lp87565. These were missing and the Makefile already assumes them to be defined. Add the corresponding SPL config options. This enables the pmics in SPL. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-06-11regulator: bd71837: copy the bd71837 pmic driver from NXP imx u-bootMatti Vaittinen1-0/+7
https://source.codeaurora.org/external/imx/uboot-imx cherry picked, styled and merged commits: - MLK-18387 pmic: Add pmic driver for BD71837: e9a3bec2e95a - MLK-18590 pmic: bd71837: Change to use new fdt API: acdc5c297a96 Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-12power: rename stpmu1 to official name stpmic1Patrick Delaunay1-3/+3
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-10power: add FAN53555 family supportPhilipp Tomsich1-0/+14
This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-07-30Kconfig: Remove trailing whitespaces in promptMichal Simek1-1/+1
Remove additional trailing whitespaces in prompt reported by kconfiglib: warning: DM_PMIC_SANDBOX (defined at drivers/power/pmic/Kconfig:133) has leading or trailing whitespace in its prompt warning: <choice> (defined at dts/Kconfig:204) has leading or trailing whitespace in its prompt Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Felix Brack <fb@ltec.ch>
2018-05-18pmic: dm: Add support for MC34708 for PMIC DMLukasz Majewski1-0/+7
This patch adds support for MC34708 PMIC, to be used with driver model (DM). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-19pmic: add stpmu1 supportPatrick Delaunay1-0/+8
This driver implements register read/write operations for STPMU1. The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches. It is accessed via an I2C interface. This device is used with STM32MP1 SoCs. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-12-13power: pmic/regulator: Add basic support for TPS65910Felix Brack1-0/+8
Texas Instrument's TPS65910 PMIC contains 3 buck DC-DC converts, one boost DC-DC converter and 8 LDOs. This patch implements driver model support for the TPS65910 PMIC and its regulators making the get/set API for regulator value/enable available. This patch depends on the patch "am33xx: Add a function to query MPU voltage in uV" to build correctly. For boards relying on the DT include file tps65910.dtsi the v3 patch "power: extend prefix match to regulator-name property" and an appropriate regulator naming is also required. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09power: pmic: lp87565: Add the basic pmic supportKeerthy1-0/+7
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-05-10power: rk808: rename to rk8xxJacob Chen1-3/+3
Since this driver can be used for rk8xx series pmic, let's rename rk808 to rk8xx, to make it clear. Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./` Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
2017-04-30power: Convert CONFIG_PMIC_AS3722 to KconfigSimon Glass1-0/+8
This converts the following to Kconfig: CONFIG_PMIC_AS3722 Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-09power: pmic: add the max8997 controller for DMJaehoon Chung1-0/+15
Add the max8997 controller for Driver model. Exynos4210 is using max8997 pmic controller. (pmic_max8997.c should be deprecated.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-18pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmicHou Zhiqiang1-0/+7
This patch adds a simple pmic driver for the mc34vr500 pmic which is used in conjunction with the fsl T1 and LS1 series SoC. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-22power: pmic: add the max8998 controller for DMJaehoon Chung1-0/+7
Add the max8998 controller for Driver model. Samsung S5P series are using max8998 pmic controller. In future, it should be supported the regulator framework. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-10-11power: pmic: lp873x: Add the base pmic supportKeerthy1-0/+7
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11power: pmic: Palmas: Add the base pmic supportKeerthy1-0/+7
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write funtions to access pmic registers. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-07power: pmic: add Ricoh RN5T567 PMIC supportStefan Agner1-0/+8
Add device model enabled PMIC driver for Ricoh RN5T567 PMIC used on Colibri iMX7. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-02pmic: Add support for Qualcomm PM8916 PMICMateusz Kulikowski1-0/+16
This PMIC is connected on SPMI bus so needs SPMI support enabled. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-22dm: power: Allow regulators to be omitted from SPLSimon Glass1-0/+21
For some boards the pmic interface is useful but the regulator interface (which comes with it) is too large. Allow them to be separated such that SPL can decide which it needs. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22power: Add base support for the RK808 PMICSimon Glass1-0/+9
This Rockchip PMIC provides features suitable for battery-powered applications. It is commonly used with Rockchip SoCs. Add a driver which provides register access. The regulator driver will use this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-02dm: pmic: add s2mps11 PMIC I/O driverPrzemyslaw Marczak1-0/+14
This driver allows I/O operations on the Samsung S2MPS11 PMIC, which provides lots of LDO/BUCK outputs. To enable it, update defconfig with: - CONFIG_PMIC_S2MPS11 and additional, if were not defined: - CONFIG_CMD_PMIC - CONFIG_ERRNO_STR The binding info: doc/device-tree-bindings/pmic/s2mps11.txt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-09-03power: Add support for ACT8846 PMICSimon Glass1-0/+9
Add a driver for the ACT8846 PMIC. This supports several LDOs and BUCKs and is connected to the I2C bus. This driver supports using a regulator driver to access the regulators. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-14Add missing part of: "power: pmic: pfuze100 support driver model"Peng Fan1-0/+7
This part of mentioned commit, was missed by my mistake during the rebase. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Original commit message: power: pmic: pfuze100 support driver model 1. Support driver model for pfuze100. 2. Introduce a new Kconfig entry DM_PMIC_PFUZE100 for pfuze100 3. This driver intends to support PF100, PF200 and PF3000, so add the device id into the udevice_id array. 4. Rename PMIC_NUM_OF_REGS macro to PFUZE100_NUM_OF_REGS. Change-Id: I4fc88414f3c0285f9648e47ec7aed60addeccc4d Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-06dm: power: Add support for the S5M8767 PMICSimon Glass1-0/+9
This PMIC is used with SoCs which need a combination of BUCKs and LDOs. The driver supports probing and basic register access. It supports the standard device tree binding and supports driver model. A regulator driver can be provided also. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: power: Add a new driver for the TPS65090 PMICSimon Glass1-0/+9
The existing TPS65090 driver does not support driver model. Add a new one that does. This can be used as a base for a regulator driver also. It uses the standard device tree binding. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-05-15sandbox: add: sandbox PMIC device drivers: I2C emul, pmic, regulatorPrzemyslaw Marczak1-0/+25
This commit adds emulation of sandbox PMIC device, which includes: - PMIC I2C emulation driver - PMIC I/O driver (UCLASS_PMIC) - PMIC regulator driver (UCLASS_REGULATOR) The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes, which allows using 'i2c md' command with the default count (16). The sandbox PMIC provides regulators: - 2x BUCK - 2x LDO Each, with adjustable output: - Enable state - Voltage - Current limit (LDO1/BUCK1 only) - Operation mode (different for BUCK and LDO) Each attribute has it's own register, beside the enable state, which depends on operation mode. The header file: sandbox_pmic.h includes PMIC's default register values, which are set on i2c pmic emul driver's probe() method. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
2015-05-15dm: pmic: code cleanup of PMIC uclass driverPrzemyslaw Marczak1-1/+1
The cleanup includes: - pmic.h - fix mistakes in a few comments - pmic operations: value 'reg_count' - redefine as function call - fix function name: pmic_bind_childs() -> pmic_bind_children() - pmic_bind_children: change the 'while' loop with the 'for' - add implementation of pmic_reg_count() method - pmic_bind_children() - update function call name - Kconfig: add new line at the end of file - Update MAX77686 driver code Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
2015-05-15dm: pmic: add max77686 pmic driverPrzemyslaw Marczak1-0/+7
This is the implementation of driver model PMIC driver. The max77686 PMIC driver implements read/write operations and driver bind method - to bind its childs. This driver will try to bind the regulator devices by using it's child info array with regulator prefixes and driver names. This should succeed when compatible regulator driver is compiled. If no regulator driver found, then the pmic can still provide read/write operations, and can be used with PMIC function calls. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-15dm: pmic: add implementation of driver model pmic uclassPrzemyslaw Marczak1-0/+11
This commit introduces the PMIC uclass implementation. It allows providing the basic I/O interface for PMIC devices. For the multi-function PMIC devices, this can be used as I/O parent device, for each IC's interface. Then, each PMIC particular function can be provided by the child device's operations, and the child devices will use its parent for read/write by the common API. Core files: - 'include/power/pmic.h' - 'drivers/power/pmic/pmic-uclass.c' The old pmic framework is still kept and is independent. For more detailed informations, please look into the header file. Changes: - new uclass-id: UCLASS_PMIC - new config: CONFIG_DM_PMIC Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 15:02:39 +0300