summaryrefslogtreecommitdiff
path: root/drivers/serial/serial-uclass.c
AgeCommit message (Collapse)AuthorFilesLines
2022-02-09serial-uclass: fix build warningHeiko Schocher1-1/+1
if CONFIG_DM_STDIO is defined but SERIAL_PRESENT not, gcc drops warnings for serial_stub_* functions that they are defined but not used. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-13fdt: Drop SPL_BUILD macroSimon Glass1-1/+2
This old macro is not needed anymore since we can use IS_ENABLED() now. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini1-1/+1
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12cmd: bind: Fix driver binding on a devicePatrice Chotard1-1/+1
Fix a regression brings by commit 84f8e36f03fa ("cmd: bind: allow to bind driver with driver data") As example, the following bind command doesn't work: bind /soc/usb-otg@49000000 usb_ether As usb_ether driver has no compatible string, it can't be find by lists_bind_fdt(). In bind_by_node_path(), which called lists_bind_fdt(), the driver entry is known, pass it to lists_bind_fdt() to force the driver entry selection. For this, add a new parameter struct *driver to lists_bind_fdt(). Fix also all lists_bind_fdt() callers. Fixes: 84f8e36f03fa ("cmd: bind: allow to bind driver with driver data") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reported-by: Herbert Poetzl <herbert@13thfloor.at> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-02serial: Remove extraneous SYS_MALLOC_F checkTom Rini1-4/+0
We enforce that DM_SERIAL will have SYS_MALLOC_F enabled and so SYS_MALLOC_F_LEN will have a value. Remove the build-time check. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass1-1/+1
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-06dm: define LOG_CATEGORY for all uclassPatrick Delaunay1-0/+2
Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass1-0/+1
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-16drivers: serial: probe all uart devicesVabhav Sharma1-0/+9
U-Boot DM model probe only single device at a time which is enabled and configured using device tree or platform data method. PL011 UART IP is SBSA compliant and firmware does the serial port set-up, initialization and let the kernel use UART port for sending and receiving characters. Normally software talk to one serial port time but some LayerScape platform require all the UART devices enabled in Linux for various use case. Adding support to probe all enabled serial devices like SBSA compliant PL011 UART ports probe and initialization by firmware. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-01-05dm: core: Access device flags through functionsSimon Glass1-1/+1
At present flags are stored as part of the device. In preparation for storing them separately, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass1-1/+1
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22common: rename getc() to getchar()Heinrich Schuchardt1-1/+1
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-06drivers: serial: Make serial_initialize return intOvidiu Panait1-2/+2
serial_initialize is called only during the common init sequence, after relocation (in common/board_r.c). Because it has a void return value, it has to wrapped in initr_serial. In order to be able to get rid of this indirection, make serial_initialize return int. Remove extern from prototype in order to silence the following checkpatch warning: check: extern prototypes should be avoided in .h files Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-16serial: Set baudrate on bootSean Anderson1-0/+1
Currently, the baud rate is never set on boot. This works ok when a previous bootloader has configured the baudrate properly, or when the baudrate is set to a reasonable default in the serial driver's probe(). However, when this is not the case, we could be using a different baud rate than what was configured. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-02-06dm: core: Create a new header file for 'compat' featuresSimon Glass1-0/+1
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-03dm: serial: Handle "stdout-path" with ":options" correctlyBin Meng1-17/+19
With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"), SiFive Unleashed board does not boot any more. This was due to the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") to libfdt/fdt_ro.c was dropped during the libfdt upgrade. >From the history [1] it was mentioned that the U-Boot changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") was rejected by libfdt upstream, hence we need find another way to fix the things. This commit uses another method, by updating serial_check_stdout() directly to handle the situation of "stdout-path" with ":options". A simpler way is to change the logic in fdtdec_get_chosen_node() to do similar thing, but I feel that not every property in chosen node may have the option in them, hence it would make more sense to do the special handling in serial_check_stdout() directly. [1]: http://patchwork.ozlabs.org/patch/462756/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-08-12env: Rename environment.h to env_internal.hSimon Glass1-1/+1
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-15dm: serial: Adjust serial_getinfo() to use proper APISimon Glass1-6/+3
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-15dm: serial: Adjust serial_setconfig() to use proper APISimon Glass1-6/+3
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-15dm: serial: Adjust serial_getconfig() to use proper APISimon Glass1-6/+3
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-12-05dm: serial: Introduce ->getinfo() callbackAndy Shevchenko1-0/+21
New callback will give a necessary information to fill up ACPI SPCR table, for example. Maybe used later for other purposes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Change ADR_SPACE_SYSTEM_IO to SERIAL_ADDRESS_SPACE_IO to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05dm: serial: Add ->getconfig() callbackAndy Shevchenko1-0/+16
In some cases it would be good to know the settings, such as parity, of current serial console. One example might be an ACPI SPCR table to generate using these parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()Bin Meng1-1/+1
Currently the comments of several APIs (eg: dm_init_and_scan()) say: @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC flag. If false bind all drivers. The 'Pre-Relocation Support' chapter in doc/driver-model/README.txt documents the same that both device tree properties and driver flag are supported. However the implementation only checks these special device tree properties without checking the driver flag at all. This updates lists_bind_fdt() to consider both scenarios. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Squashed in http://patchwork.ozlabs.org/patch/996473/ : Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-09dm: Fix typo - missed semicolonAndy Shevchenko1-1/+1
The commit 484fdf5ba058 ("dm: Add support for all targets which requires MANUAL_RELOC") introduces subtle typo, i.e. missed semicolon. Fixes: 484fdf5ba058 ("dm: Add support for all targets which requires MANUAL_RELOC") Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2018-10-09serial: Allow serial to be absent in TPLSimon Glass1-0/+4
At present this option applies to SPL, but it should be available in TPL also, and separately. Change to using CONFIG_IS_ENABLED(), add a new Kconfig option and fix up hang(). Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-11dm: serial: Replace setparity by setconfigPatrice Chotard1-0/+16
Replace setparity by more generic setconfig ops to allow uart parity, bits word length and stop bits number change. Adds SERIAL_GET_PARITY/BITS/STOP macros. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-11serial: protect access to serial rx bufferPatrick Delaunay1-0/+3
Add test to avoid access to rx buffer when this buffer is empty. In this case directly call getc() function to avoid issue when tstc() is not called. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-29serial: Make full device search optionalAlexander Graf1-0/+13
Commit 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails") added code to search for more serial devices if the default one was not probed correctly. Unfortunately, that breaks omap3_evm. So while investigating why that is the case, let's disable the full search for everyone but bcm283x where it is needed. Fixes: 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails") Reported-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28serial: Use next serial device if probing failsAlexander Graf1-6/+19
Currently our serial device search chokes on the fact that the serial probe function could fail. If it does, instead of searching for the next usable serial device, it just quits. This patch changes the fallback logic so that even when a serial device was not probed correctly, we just try the next ones until we find one that works. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-24serial: serial-uclass: Add generic serial RX buffer supportStefan Roese1-2/+46
Pasting longer lines into the U-Boot console prompt sometimes leads to characters missing. One problem here is the small 16-byte FIFO of the legacy NS16550 UART, e.g. on x86 platforms. This patch now introduces a Kconfig option to enable RX buffer support for all DM based serial drivers. With this option enabled, I was able paste really long lines into the U-Boot console, without any characters missing. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-31dm: console: Check for serial devices properlySimon Glass1-1/+1
With driver model the serial device is often not called "serial". Mark driver-model stdio devices so that they can be detected and we can look up the uclass. This is a more reliable way of finding out whether the console is connected to a serial device or not. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-27spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LENAndy Yan1-2/+2
Some platforms have very limited SRAM to run SPL code, so there may not be the same amount space for a malloc pool before relocation in the SPL stage as the normal U-Boot stage. Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN, so the size of pre-relocation malloc pool can be configured memory space independently. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fixed up commit-message:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11dm: serial: Add livetree supportSimon Glass1-3/+15
Add support for a live device tree to the core serial uclass. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
2017-07-11dm: serial: Separate out the core serial-device finding codeSimon Glass1-40/+44
This function is quite long. Move the core code into a separate function in preparation for adding livetree support. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
2017-07-06serial: make serial_stub_* to static functionsMasahiro Yamada1-4/+7
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: core: Update lists_bind_fdt() to use ofnodeSimon Glass1-1/+2
Adjust this function to use an ofnode instead of an offset, so it can be used with livetree. This involves updating all callers. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17serial: serial-uclass: Use force parameter in stdio_deregister_dev()Stefan Roese1-1/+1
On my x86 platform I've noticed, that calling dm_uninit() or the new function dm_remove_devices_flags() does not remove the desired device at all. Debugging showed, that the serial uclass returns -EPERM in serial_pre_remove(). This patch sets the force parameter when calling stdio_deregister_dev() resulting in a removal of the device. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-24Convert CONFIG_SYS_STDIO_DEREGISTER to KconfigSimon Glass1-1/+1
This converts the following to Kconfig: CONFIG_SYS_STDIO_DEREGISTER This option should never be enabled in SPL, so use CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) when checking the option. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-sync] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-15dm: serial: Add support for of-platdataSimon Glass1-1/+7
When this feature is enabled, we cannot access the device tree to find out which serial device to use. Just use the first serial driver we find. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-17x86: Allow use of serial soon after relocationSimon Glass1-1/+1
At present on x86 machines with use cache-as-RAM, the memory goes away just before board_init_r() is called. This means that serial drivers are no-longer unavailable, until initr_dm() it called, etc. Any attempt to use printf() within this period will cause a hang. To fix this, mark the serial devices as 'unavailable' when it is no-longer available. Bring it back when serial_initialize() is called. This means that the debug UART will be used instead for this period. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-15dm: serial-uclass: Move a carriage return before a line feedAlison Wang1-2/+3
In general, a carriage return needs to execute before a line feed. The patch is to change serial DM driver serial-uclass.c based on this rule. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12dm: serial: Allow the UART driver to be dropped from the imageSimon Glass1-1/+3
In very very space-constrained devices even the full UART driver is too large. In this case the debug UART can still be used in some cases. Add options to enable the UART driver in SPL and U-Boot proper. Enable both options by default. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-11dm: serial: Minor coding style cleanup of some commentsStefan Roese1-10/+10
Fix incorrect comment alignments. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-04dm: serial: Deal with stdout-path with an aliasSimon Glass1-5/+25
Sometimes stdout-path contains a UART alias along with speed, etc. For example: stdout-path = "serial0:115200n8"; Add support for decoding this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-18of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada1-2/+2
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-10dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial portHans de Goede1-3/+17
Currently the serial code assumes that there is always at least one serial port (and panics / crashes due to null pointer dereferences when there is none). This makes it impossible to use u-boot on boards where there is no (debug) serial port, because e.g. all uart pins are muxed to another function. This commit adds a CONFIG_REQUIRE_SERIAL_CONSOLE Kconfig option, which defaults to y (preserving existing behavior), which can be set to n on such boards to make them work. This commit only implements this for CONFIG_DM_SERIAL=y configs, as allowing running without a serial port for CONFIG_DM_SERIAL=n configs is non trivial, and is not necessary at this moment. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05dm: serial: Correct logic in serial_find_console_or_panic()Simon Glass1-1/+1
In a final attempt to find a console UART this function uses the first first available serial device. However the check for a valid device is inverted. This code is only executed when there is in fact no serial UART, but at present it can fail to reach the panic_str() call in this case, and start trying to use a non-existent UART. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-06-11sandbox: Move CONFIG_SANDBOX_SERIAL to KconfigSimon Glass1-2/+3
Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-01 14:54:21 +0300