starfive-tech/u-boot.git - StarFive Tech U-Boot for VisionFive (JH7110) boards (mirror)

Age	Commit message (Collapse)	Author	Files	Lines
2021-03-20	serial: mtk: rewrite the setbrg function	Weijie Gao	1	-41/+33
	Currently the setbrg logic of serial-mtk is messy, and should be rewritten. Also an option is added to make it possible to use highspeed-3 mode for all bauds. The new logic is: 1. If baud clock > 12MHz a) If baud <= 115200, highspeed-0 mode will be used (ns16550 compatible) b) If baud <= 576000, highspeed-2 mode will be used c) any bauds > 576000, highspeed-3 mode will be used 2. If baud clock <= 12MHz Forced highspeed-3 mode a) If baud <= 115200, calculates the divisor using DIV_ROUND_CLOSEST b) any bauds > 115200, the same as 1. c) Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-02-02	common: Drop asm/global_data.h from common header	Simon Glass	1	-0/+1
	Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-14	dm: treewide: Rename ofdata_to_platdata() to of_to_plat()	Simon Glass	1	-2/+2
	This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13	dm: treewide: Rename auto_alloc_size members to be shorter	Simon Glass	1	-1/+1
	This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19	common: Drop log.h from common header	Simon Glass	1	-0/+1
	Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-06	dm: core: Require users of devres to include the header	Simon Glass	1	-1/+2
	At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-25	serial: serial_mtk: add non-DM version for SPL	Weijie Gao	1	-17/+185
	This patch adds non-DM version for mtk hsuart driver and makes it compatible with ns16550a driver in configuration. This is needed in SPL with CONFIG_SPL_DM disabled for reducing size. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25	serial: serial_mtk: enable FIFO and disable flow control	Weijie Gao	1	-0/+21
	This patch adds codes to enable FIFO and disable flow control taken from ns16550 driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2018-11-29	serial: MediaTek: add high-speed uart driver for MediaTek SoCs	Ryder Lee	1	-0/+268
	Many SoCs from MediaTek have a high-speed uart. This UART is compatible with the ns16550 in legacy mode. It has extra registers for high-speed mode which can reach a maximum baudrate at 921600. However this UART will no longer be compatible if it's in high-speed mode. Some BootROM of MediaTek's SoCs will change the UART into high-speed mode and the U-Boot must use this driver to initialize the UART. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Tested-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>