summaryrefslogtreecommitdiff
path: root/drivers/serial/serial_ns16550.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass1-0/+1
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05serial: Rename ns16550 functions to lower caseSimon Glass1-6/+6
Lower case should be used for function names. Update this driver and its callers accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-05serial: Update NS16550_t and struct NS16550Simon Glass1-7/+7
Typedefs should not be used in U-Boot and structs should be lower case. Update the code to use struct ns16550 consistently. Put a header guard on the file while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-17common: Move clock functions into a new fileSimon Glass1-0/+1
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Drop floppy disk supportSimon Glass1-6/+1
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-25serial: Remove serial_putc_raw_devTom Rini1-11/+0
clang-3.8 reports that serial_putc_raw_dev in serial_ns16550.c is unused. Further investigation shows that we have 3 places that implement this function and no callers, remove. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-10-24serial: add static directive to local functionsMasahiro Yamada1-14/+7
The functions _serial_putc, _serial_putc_raw, _serial_puts, _serial_getc, _serial_tstc, _serial_setbrg are defined and used locally in each of serial_ns16550.c and serial_s3c24x0.c. Add static directive to them and remove declarations from include/common.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-09-10dm: serial: Move baud rate calculation to ns16550.cSimon Glass1-10/+4
Move the function that calculates the baud rate divisor into ns16550.c so it can be used by that file. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09omap: clean-up dead configsMasahiro Yamada1-9/+0
The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
2014-07-22serial: ns16550: use a const variable instead of macroMasahiro Yamada1-3/+3
Just for type checking. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2014-07-22serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisorMasahiro Yamada1-7/+3
The function still returns the same value. The comment block is no longer necessary because our intention is clear enough by using DIV_ROUND_CLOSEST() macro. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-22serial: ns16550: drop CONFIG_OMAP1610 from the special caseMasahiro Yamada1-6/+0
If CONFIG_OMAP1610 is defined, the code returning the fixed value (26) is enabled. But this case is covered by the following code. (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) / (MODE_X_DIV * gd->baudrate) = (48000000 + (115200 * (16 / 2))) / (16 * 115200) = 48921600 / 1843200 = 26 The "#ifdef CONFIG_OMAP1610" was added by commit 6f21347d more than ten years ago. In those days, the divide-and-round was not used. I guess that is why this weird code was added here. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Rishi Bhattacharya <rishi@ti.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk1-17/+1
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-06-10arm: Remove OMAP2420H4 and all omap24xx supportTom Rini1-5/+0
The omap2420H4 was the only mainline omap24xx board. Prior to being fixed by Jon Hunter in time for v2013.04 it had been functionally broken for a very long time. Remove this board as there's not been interest in it in U-Boot for quite a long time. Signed-off-by: Tom Rini <trini@ti.com>
2013-02-20serial/ns16550: don't generate functions for undefined portsScott Wood1-0/+12
This saved 640 bytes on MPC8536DS (a board with two of the six ports defined). Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-11-27serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONSScott Wood1-0/+4
CONFIG_NS16550_MIN_FUNCTIONS is used by small SPLs to gain access to basic ns16550 output code without pulling in things not needed by the SPL. This previously only worked with non-MULTI configs. Recently MULTI was made mandatory, and MIN_FUNCTIONS fails like this: drivers/serial/libserial.o: In function `calc_divisor.clone.0': serial_ns16550.c:(.text.calc_divisor.clone.0+0x24): undefined reference to `get_bus_freq' drivers/serial/libserial.o: In function `_serial_getc': (.text._serial_getc+0x30): undefined reference to `NS16550_getc' drivers/serial/libserial.o: In function `_serial_tstc': (.text._serial_tstc+0x30): undefined reference to `NS16550_tstc' drivers/serial/libserial.o: In function `_serial_setbrg': (.text._serial_setbrg+0x3c): undefined reference to `NS16550_reinit' make[1]: *** [/tmp/u-boot/spl/u-boot-spl] Error 1 make: *** [/tmp/u-boot/spl/u-boot-spl.bin] Error 2 With MIN_FUNCTIONS we don't need anything from this file, so don't build it. The conditional needs to be in the file itself rather than the makefile, because the config symbols are only imported to the makefiles once, not separately for the SPL phase of the build. Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-11-05Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini1-3/+33
2012-11-04drivers/serial/serial_ns16550.c: sparse fixesKim Phillips1-15/+27
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-26serial: ns16550: Enable COM5 and COM6Andrew Bradford1-3/+33
Increase the possible number of ns16550 serial devices from 4 to 6. Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
2012-10-25drivers/serial/serial_ns16550.c: sparse fixesKim Phillips1-6/+6
serial_ns16550.c:222:1: warning: symbol 'eserial1_init' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_setbrg' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_getc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_tstc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_putc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_puts' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_init' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_setbrg' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_getc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_tstc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_putc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_puts' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_init' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_setbrg' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_getc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_tstc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_putc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_puts' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_init' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_setbrg' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_getc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_tstc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_putc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_puts' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15serial: Remove CONFIG_SERIAL_MULTI from serial driversMarek Vasut1-95/+0
Remove the support for not-CONFIG_SERIAL_MULTI part from serial port drivers and some board files. Since CONFIG_SERIAL_MULTI is now enabled by default, that part is a dead code. Remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15serial: ns16550: Rename serial.c to serial_ns16550.cMarek Vasut1-0/+359
This serial driver had wrong name of the source file for some time now. The name of the driver was serial.c instead of any more logical and fitting name. Thus, rename the driver source file to serial_ns16550.c and be done with it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-26 06:31:04 +0300