summaryrefslogtreecommitdiff
path: root/drivers/serial/serial_stm32.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-13serial: stm32: define LOG_CATEGORYPatrick Delaunay1-0/+3
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-12-14dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass1-8/+8
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass1-2/+2
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass1-7/+7
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass1-1/+1
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass1-1/+1
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-25treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini1-1/+1
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-19common: Drop linux/bitops.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-06dm: core: Create a new header file for 'compat' featuresSimon Glass1-0/+1
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-27serial: stm32: add Framing error supportPatrick Delaunay1-2/+3
Add management of Bit 1 of USART_ISR = FE: Framing error This bit is set by hardware when a de-synchronization, excessive noise or a break character is detected. It is cleared by software, writing 1 to the FECF bit in the USART_ICR register (for stm32 after f4). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12serial: stm32: Fix warnings when compiling with W=1Patrick Delaunay1-2/+2
This patch solves the following warnings: drivers/serial/serial_stm32.c: In function 'stm32_serial_probe': warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (plat->clock_rate < 0) { ^ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23serial: stm32: remove watchog reset in debug putcPatrick Delaunay1-1/+1
For STM32MP, the watchdog is based on DM and the function watchod_reset call the function uclass_get_device(UCLASS_WDT) to found the driver associated IWDG2. As this reset is not mandatory in debug putc (the uart fifo will be empty after some us), we can simplify the code by removing this call. And this patch avoid issue when putc is called before initialization of DM core, before the parsing of the device tree parsing and each node bound to driver; that also avoid memory leak. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23serial: stm32: remove unnecessary tracePatrick Delaunay1-1/+0
Remove the trace indicating the end of the DEBUG initialization Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-12-15serial: serial_stm32: Add reset supportPatrice Chotard1-0/+9
In some cases, UART is configured by early boot stage. To be sure of the initial state of UART and to avoid spurious chars on console, reset the serial block before configuring it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14serial: Remove DM_FLAG_PRE_RELOC flag in various driversBin Meng1-0/+2
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-11serial: stm32: Replace setparity by setconfigPatrice Chotard1-6/+15
Replace stm32_serial_setparity by stm32_serial_setconfig which allows to set serial bits number, parity and stop bits number. Only parity setting is implemented. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-27serial: stm32: Add setparity supportPatrick Delaunay1-2/+43
Add possibility to update the serial parity used. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-27serial: stm32: Fix bits defines namePatrice Chotard1-6/+6
Rename USART_ISR_FLAG_xxx bits to USART_ISR_xxx bits and USART_ICR_OREF to USART_ICR_ORECF in order to match datasheets. Sort defines by descendant order. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-27serial: stm32: Add debug uart supportPatrick Delaunay1-22/+83
Add support for early debug printf, before the availability of driver model and device tree support. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-29serial: serial_stm32: Rename status register flagsPatrice Chotard1-5/+5
Uart status register is named USART_ISR on STM32F7, STM32H7 and STM32MP1 SoCs family, but USART_SR only on STM32F4 SoCs. Use USART_ISR_ prefix instead of USART_SR_ . Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-29serial: serial_stm32: Enable overrunPatrice Chotard1-4/+11
Enable uart overrun feature which allows to benefits of uart FIFO usage. Previously overrun management was disabled, this has to effect to bypassed the uart FIFO usage even if FIFO was enabled. In particular configuration, for example when video console is enabled, copy/pasting a long command line in console results in corruption. This is due to the fact that a lot of time is consumed in flushing the cache during frame buffer update, so uart chars are not read fast enough. By using uart FIFO and managing overrun, long command line can by copy/paste in console without being corrupted. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini1-2/+0
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-19serial: stm32: Rename serial_stm32x7.c to serial_stm32.cPatrice Chotard1-0/+159
Now this driver is used across stm32f4, stm32f7 and stm32h7 SoCs family, give it a generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-10board: stm32f429-disco: switch to DM STM32 serial driverPatrice Chotard1-117/+0
Remove serial_stm32.c driver and uart init from board file, use available DM serial_stm32x7.c driver compatible for STM32F4/F7 and H7 SoCs. The serial_stm32x7.c driver will be renamed later with a more generic name as it's shared with all STM32 Socs. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-02-08serial: serial_stm32: move clock config from driver to boardVikas Manocha1-40/+0
This patch removes the uart clock enable from serial driver & move it in the board code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-12stm32: Convert serial driver to DMKamil Lulko1-107/+96
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-27Revert "Revert "stm32f4: fix serial output""Tom Rini1-0/+3
Due to a misunderstanding, in 698a12b we reverted changes that we in fact wanted to keep. So lets fix that mistake and bring the code back to how it should have been. This reverts commit 698a12bef9e782dcd99c555a739c16eec8669f14. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-10Revert "stm32f4: fix serial output"Tom Rini1-3/+0
As per the author, we don't need this patch really since the other patch "stm32f4: fix serial output" superseded it. This reverts commit 85e5f5b7a7f8d889271f94791606cde62d81d53f. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-10stm32f4: add serial print portkunhuahuang1-12/+59
Add the stm32F4 board's serial ports support. User can use it easily. The user only need to edit the number of the usart. The patch also fix the serial print out. Last, this version of patch fix the first patch checkpatch.pl error. Thanks to Kamil Lulko. Signed-off-by: kunhuahuang <huangkunhua@gmail.com>
2015-05-10stm32f4: fix serial outputkunhuahuang1-0/+4
This patch fix the serial output. The source is from Kamil Lulko's "stm32f429-discovery board support" Thanks, Varcain. I learned a lot. Signed-off-by: kunhuahuang <huangkunhua@gmail.com>
2015-04-22stm32f4: Add serial driverrev13@wp.pl1-0/+117
Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-20 09:32:17 +0300