summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-exynos.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass1-0/+1
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-14dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass1-5/+5
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass1-2/+2
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass1-2/+2
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass1-1/+1
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass1-2/+2
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-25treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini1-1/+1
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-05libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada1-1/+1
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-01dm: Rename dev_addr..() functionsSimon Glass1-1/+1
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass1-1/+1
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-24treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada1-1/+1
Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-17usb: host: ehci: samsung: Move hcor initialization after usb phy setupLukasz Majewski1-2/+2
With the old order of initialization the hcor pointer has been setup to the same address as Exynos EHCI base address (0x12110000 instead of 0x12110010). Such behaviour was caused by reading value of 0 instead of 0x10 from EHCI HCCPBASE register without doing proper clock initialization before. To fix this problem hcor initialization has been moved after USB PHY setup. Now ehci_readl(&ctx->hcd->cr_capbase) returns correct value. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-05-06dm: usb: exynos: Drop legacy USB codeSimon Glass1-117/+0
Drop the code that doesn't use driver model for USB. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18dm: usb: exynos: Add driver model support to exynos EHCISimon Glass1-1/+111
Update this driver with driver model support for USB. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2015-01-30dm: usb: Remove use of fdtdec GPIO supportSimon Glass1-5/+5
These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-17arm: odroid: usb: add support for usb host including ethernetSuriyan Ramasami1-8/+47
This change adds support for enabling the USB host features of the board. This includes the USB3503A hub and the SMC LAN9730 ethernet controller as well. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-04-30exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DTandrey.konovalov@linaro.org1-1/+2
Commit 4a271cb1b4ff doesn't take into account that fdtdec_setup_gpio() returns success when the gpio passed to it is FDT_GPIO_NONE (no gpio node found in the fdtdec_decode_gpio() call). This results in calling gpio_direction_output() on invalid gpio. For this reason executing "usb start" command on Arndale causes data abort in the ehci-exynos driver. Add the fdt_gpio_isvalid() check to fix that problem. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
2014-01-13usb: exynos5: arndale: Add network supportInderpal Singh1-0/+2
Arndale board has AX88760, which is USB 2.0 Hub & USB 2.0 Ethernet Combo controller, connected to HSIC Phy of USB host controller via USB3503 hub. This patch uses board specific board_usb_init function to perform reset sequence for USB3503 hub and enables the relevant config options for network to work. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
2014-01-13usb: ehci: exynos: set/reset hsic physInderpal Singh1-0/+39
The controller has 3 ports. The port0 is for USB 2.0 Phy, port1 and port2 are for HSIC phys. The usb 2.0 phy is already being setup. This patch sets up the hsic phys. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2013-10-21usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.Troy Kisky1-1/+2
This paramter will later be used to initialize OTG ports in host or device mode. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-10-21exynos: usb: Switch USB VBUS GPIOs to be device tree configuredJulius Werner1-0/+11
Some Exynos boards, such as the SMDK5250, control USB port power through a GPIO pin. For now this had been hardcoded in the exynos5-dt board file, but not all boards use the same pin, requiring local changes to support different boards. This patch moves the GPIO initialization into the USB host controller drivers which they belong to, and uses the samsung,vbus-gpio parameter in the device tree to configure it. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk1-14/+1
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-03-18usb: ehci: exynos: Enable non-dt pathVivek Gautam1-0/+7
Enabling the non-dt path for the driver so that we don't get any build errors for non-dt configuration. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: exynos: Fix multiple FDT decodeVivek Gautam1-28/+16
With current FDT support driver tries to parse device node twice in ehci_hcd_init() and ehci_hcd_stop(), which shouldn't happen ideally. Making provision to store data in a global structure and thereby passing its pointer when needed. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
2013-01-08EHCI: Exynos: Add fdt supportRajeshwari Shinde1-7/+85
Adding fdt support to ehci-exynos in order to parse register base addresses from the device node. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-10-15usb: ehci: rework to take advantage of new lowlevel interfaceLucas Stach1-8/+7
Kill off ehci-core.h It was used to specify some static controller data. To support more than one controller being active at any time we have to carry the controller data ourselfes. Change the ehci interface accordingly. NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed to do the same thing as other platforms. But the change for now is at least compile clean. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
2012-07-09EXYNOS: Add power Enable/Disable for USB-EHCIRajeshwari Shinde1-0/+5
This patch adds functions to enable/disable the power of USB host controller for EXYNOS5. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-07-09USB: EXYNOS: Set USB 2.0 HOST Link modeRajeshwari Shinde1-0/+3
This patch adds a function to set usb host mode to USB 2.0 HOST Link for EXYNOS5 Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-07-09USB: EXYNOS: Incorporate EHCI review commentsRajeshwari Shinde1-0/+110
This patch incorates the review comments given by Minkyu Kang for EHCI support on EXYNOS Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 19:42:01 +0300