summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2019-12-03common: Move ARM cache operations out of common.hSimon Glass6-0/+6
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-08usb: xhci: support 1.1 or later versionChunfeng Yun1-1/+1
The xHCI 1.1 version also need set Transfer Type field Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-31usb: ehci-hcd: Keep async schedule runningMarek Vasut1-30/+21
Profiling the EHCI driver shows a significant performance problem in ehci_submit_async(). Specifically, this function keeps enabling and disabling async schedule back and forth for every single transaction. However, enabling/disabling the async schedule does not take effect immediatelly, but instead may take up to 1 mS (8 uFrames) to complete. This impacts USB storage significantly, esp. since the recent reduction of maximum transfer size to support more USB storage devices. This in turn results in sharp increase in the number of ehci_submit_async() calls. Since one USB storage BBB transfer does three such calls and the maximum transfer size is 120 kiB, the overhead is 6 mS per 120 kiB, which is unacceptable. However, this overhead can be removed simply by keeping the async schedule running. Specifically, the first transfer starts the async schedule and then each and every subsequent transfer only adds a new QH into that schedule, waits until the QH is completed and does NOT disable the async schedule. The async schedule is stopped only by shutting down the controller, which must happen before moving out of U-Boot, otherwise the controller will corrupt memory. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
2019-10-24ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULPYe Li2-16/+43
The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-24usb: ehci-mx6: Fix bus enumeration for iMX7 SoCsIgor Opaniuk1-7/+8
This fixes the issues with calculation of controller indexes in ehci_usb_bind() for iMX7, as USB controllers on iMX7 SoCs aren't placed next to each other, and their addresses incremented by 0x10000. Example of USB nodes for iMX7S/D: usbotg1: usb@30b10000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b10000 0x200>; ^^^^^^^^^^ .... usbotg2: usb@30b20000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b20000 0x200>; ^^^^^^^^^^ .... usbh: usb@30b30000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b30000 0x200>; ^^^^^^^^^^ .... Which was leading to usb enumeration issues: Colibri iMX7 # usb start starting USB... Bus usb@30b10000: USB EHCI 1.00 Bus usb@30b20000: probe failed, error -22 scanning bus usb@30b10000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Fixes: 501547cec1("usb: ehci-mx6: Fix bus enumeration for DM case") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-24usb: xhci: move xhci.h to include usbJean-Jacques Hiblot12-1303/+11
The xhci.h header file is currently located under drivers/usb/xhci Move it to the include/usb folder to make it available to drivers that are not under drivers/usb/xhci Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: host: remove the xhci-zynqmp driverJean-Jacques Hiblot3-154/+0
This driver is not used anymore. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-15Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini7-23/+34
- Assorted bugfixes
2019-09-11usb: ohci-generic: don't probe fail if there is no clk_enable() opsKever Yang1-1/+1
Some clock driver do not have a clk_enable() call back, and we should not treat this as fail in ehci probe like other modules, eg. clk_enabl_bulk() do not return fail if ret value is '-ENOSYS' Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-09-11usb: ehci-generic: don't probe fail if there is no clk_enable() opsKever Yang1-1/+1
Some clock driver do not have a clk_enable() call back, and we should not treat this as fail in ehci probe like other modules, eg. clk_enabl_bulk() do not return fail if ret value is '-ENOSYS' Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-09-11dwc2: use the nonblock argument in submit_int_msgMichal Suchanek1-1/+1
An USB 1.1 keyboard connected to dwc2 through a high-speed hub does not report status until it changes. With this patch you can enable keyboard by pressing a key while USB devices are probed. Without a keypress no state is reported and the probe times out. We don't want to wait for a keypress or timeout while polling for keypresses so implement an int_msg nonblock variant that exits early on error. Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11usb: Add nonblock argument to submit_int_msgMichal Suchanek7-22/+33
This will be used to implement non-blocking keyboard polling in case of errors. Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-10usb: xhci-dwc3: Add support for dis_u2_susphy_quirkNeil Armstrong1-0/+3
This quirk is necessary for the Amlogic GXL SoCs otherwise the Port 2 PHY doesn't get out of suspend and U-Boot resets the board after: XHCI timeout on event type 33... cannot recover. BUG: failure at drivers/usb/host/xhci-ring.c:474/xhci_wait_for_event()! BUG! This quirk is also handled in the dwc3 core code, but until the xhci-dwc3 driver uses the dwc3 core, the quirk must be handled here to fix USB support on the Amlogic libretech-cc and libretech-ac board when a device is only plugged in the OTG port. Cc: Yuri Frolov <crashing.kernel@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Fixes: dc9cdf859e ("usb: dwc3: Add DWC3 controller driver support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-22usb: r8a66597: Add optional DM VBUS regulator supportMarek Vasut2-0/+30
Add DM regulator support for toggling VBUS, this is useful on boards which control the VBUS e.g. through GPIO. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Checkpatch cleanupMarek Vasut2-268/+268
Fix remaining checkpatch complaints in the driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Add Kconfig entryMarek Vasut1-0/+9
Add missing Kconfig entry for the R8A66597 driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Convert to USB DMMarek Vasut1-70/+125
Convert the R8A66597 USB driver to DM and add support for DT probing. Drop support for legacy non-DM and non-DT probing, since there are no platform using that. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Replace R8A66597_BASE0Marek Vasut1-3/+3
Replace R8A66597_BASE0 with proper SYSCFG0 accesses, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Remove BE supportMarek Vasut1-3/+3
While the USB controller can work both in LE and BE modes, there is no user for the BE mode, so drop it. If there ever is a user for it, it can be easily re-added back. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Replace IO accessorsMarek Vasut1-7/+7
Replace in{bwl}()/out{bwl}() IO accessors with read{bwl}()/write{bwl}(), to make the driver compile both on SH and ARM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Make CONFIG_RZA_USB defaultMarek Vasut2-74/+0
No other platforms use this r8a66597 controller but RZ/A1, make RZ/A1 support the default and drop all the other SoC support to remove ifdeffery. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Remove CONFIG_SUPERH_ON_CHIP_R8A66597Marek Vasut2-24/+2
Remove CONFIG_SUPERH_ON_CHIP_R8A66597 macro, which is unused. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-11env: Move env_get() to env.hSimon Glass1-0/+1
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-08usb, ohci, pci: add DM support for PCI-based OHCI USB controllerHeiko Schocher3-0/+60
add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: add warning if none on pci foundHeiko Schocher1-1/+4
Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hcd: set OHCI_USE_NPS if DM_PCIHeiko Schocher1-2/+3
set OHCI_USE_NPS if DM_PCI is enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: fix ohci swap register accessHeiko Schocher1-2/+2
commit 57faca19a82f ("drivers: USB: OHCI: allow compilation for 64-bit targets") broke ohci support for the mpc85xx based socrates board, as it removed volatile keyword from ohci_readl/writel. Fix this so usb works again on socrates board. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hdc: fix warning 'ohci_pci_ids' defined but not usedHeiko Schocher1-0/+2
var ohci_pci_ids is only used if DM_USB is not enabled. So define this varaible only if !CONFIG_IS_ENABLED(DM_USB) Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-19rockchip: xhci: Remove RK3399 supportMark Kettenis1-2/+0
Remove RK3399 compatible strings as this driver is no longer used on that SoC. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19usb: xhci-dwc3: Add USB2 PHY configurationMark Kettenis1-0/+20
Configure USB2 PHY register based on "phy_type" property and handle all the quirks that are relevant for Rockchip RK3399 SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19usb: dwc3-of-simple: Add support for RK3399Mark Kettenis2-0/+2
Add compatible string for RK3399 and enable it by default on Rockchip platforms with USB3 support. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-05usb: ehci-mx6: Fix bus enumeration for DM caseMarek Vasut1-0/+37
The EHCI iMX6 driver is only partly converted to DT probing and still uses a tremendous amount of hard-coded addresses. Worse, the driver uses hard-coded SoC-model-specific base addresses, which are derived from values protected by SoC-specific macros, hence the driver is also compiled for a specific SoC model. Even worse, the driver depends on specific sequential indexing of the controllers, from which it derives offsets in the PHY and ANATOP register sets. However, when the driver is probed from DT, the indexing is not correct. In fact, each controller has index 0. This patch derives the index for DT probing case from the controller base addresses, which is not the way this should be done, however it is the least intrusive approach, favorable this close to release. The necessary steps to convert this driver fully to DT probing are described inside the patch, however this should be done in the next release and depends on iMX clock driver patches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Adam Ford <aford173@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2019-05-23usb: ehci: adopt 32 bit address for CONFIG_PPCYinbo Zhu1-1/+9
adopt 32 bit addr in fsl_esdhc for CONFIG_PPC. So adopt 32 bit address for CONFIG_PPC. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-10usb: ohci: ohci-da8xx: Cleanup Error handling and fix flagsAdam Ford1-4/+5
Per feedback from Marek, he suggested better handling and to enable DM_FLAG_OS_PREPARE, this patch re-orders some of the error checking, and errors returns the error code right away and also sets DM_FLAG_OS_PREPARE. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-05usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM supportAdam Ford2-1/+142
This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03usb: ohci: Re-enable commented out delayAdam Ford1-2/+0
There is a delay function that was commented out. This patch re-enables it, because it will be needed for da850 ohci support. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25Convert CONFIG_USB_EHCI_MX5 to KconfigLukasz Majewski1-0/+7
This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25USB: DM: Convert i.MX5 ehci code to driver modelLukasz Majewski1-0/+103
This commit converts i.MX5's EHCI USB host driver to driver model (DM_USB). It is a straightforward conversion (to reuse as much code as possible), based on ehci-mx6.c code. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13configs: move CONFIG_USB_EHCI_VF to KconfigMarcel Ziswiler1-0/+7
Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one and only user thereof being colibri_vf. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09usb: ehci-mx6: Use common code to extract dr_modeAdam Ford1-14/+15
There exists code in drivers/common/common.c to read the dr_mode from the device tree. This patch converts this driver to use that function to initialize the driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-09usb: host: Print device name when scanningIsmael Luceno Cortes1-8/+4
Drop the counter, it has no meaning other than being the order in which the interface is found; the name assigned to the USB host controller interface is a better indicator. Example of the original output: > USB0: USB EHCI 1.10 > scanning bus 0 for devices... 2 USB Device(s) found > scanning usb for storage devices... 1 Storage Device(s) found Patched output: > Bus usb@ee080100: USB EHCI 1.10 > scanning bus usb@ee080100 for devices... 2 USB Device(s) found > scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
2019-02-20Kconfig: tegra: Migrate USB_EHCI_TEGRAPeter Robinson1-0/+6
Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-16usb: ehci-mx6: Make regulator DM_REGULATOR dependentAbel Vesa1-1/+6
Do the regulator related work only if the build has the DM_REGULATOR. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-18usb: host: Drop [e-o]hci-sunxi driversJagan Teki3-439/+0
Now Allwinner platform is all set to use Generic USB controller drivers, so remove the legacy sunxi drivers. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18sunxi: usb: Switch to Generic host controllersJagan Teki1-0/+2
Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-09usb: xhci-mem: Fix scratchpad array issueYe Li1-0/+3
After updating the value of dev_context_ptrs[0], we should flush this from cache to memory. Otherwise the xhci controller won't use it. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-14usb: host: replace xhci-keystone driver by the generic dwc3 driverJean-Jacques Hiblot2-241/+0
The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07dwc3: move phy operation to core.cJean-Jacques Hiblot1-88/+7
Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c
2018-11-26usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/Sven Schwermer15-47/+47
This allows to disable the USB driver model in SPL because it checks the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for regular non-SPL builds. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-26usb: Remove CMD_USB dependency for common codeSven Schwermer1-1/+1
Common USB code is built whenever USB is enabled (in non-SPL builds). The USB uclass is built whenever (SPL_)DM_USB is enabled. Both need to be independent from CMD_USB. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-11 08:55:51 +0300