summaryrefslogtreecommitdiff
path: root/drivers/video/bcm2835.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-18video: arm: rpi: Add brcm,bcm2711-hdmi0 compatibleNicolas Saenz Julienne1-0/+1
The 'brcm,bcm2711-hdmi0' compatible string is used on RPi4 instead of 'brcm,bcm2835-hdmi' since the IP core was upgraded (now called VC6 instead of VC4). This has no functional change as far as u-boot driver is concerned. So simply add the compatible string. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-12-14dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass1-1/+1
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-14dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass1-1/+1
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop net.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-29video: arm: rpi: Bail out early if querying video information failsFabian Vogt1-1/+3
When probing we query for the width and hight of the display. If the firmware does not report any connected display the system will crash. See https://github.com/raspberrypi/firmware/issues/1157 for details. Signed-off-by: Fabian Vogt <fvogt@suse.com> [mb: update commit message] Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com>
2018-07-02video: arm: rpi: Add brcm,bcm2708-fb compatibleEmmanuel Vadot1-0/+1
When using CONFIG_OF_BOARD on rpi to use the dtb provided by the RaspberryPi Fundation, the compatible string isn't the same, resulting in not-functional video in u-boot. Signed-off-by: Oleksandr Tymoshenko <gonzo@FreeBSD.org> Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-10dm: video: arm: rpi: Convert to use driver model for videoSimon Glass1-34/+28
Adjust the video driver to work with driver model and move over existing baords. There is no need to keep the old code. We can also drop setting of CONFIG_FB_ADDR since driver model doesn't have this problem. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-10video: arm: rpi: Move the video settings out of the driverSimon Glass1-58/+10
Add a function to set the video parameters to the msg handler and remove it from the video driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-10video: arm: rpi: Move the video query out of the driverSimon Glass1-17/+3
Add a function to get the video size to the msg handler and remove it from the video driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-11-29bcm2835 video: Map frame buffer as 32bppAlexander Graf1-3/+3
To enable working efifb support, let's map the frame buffer as 32bpp instead of 16bpp. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-27bcm2835 video: Map fb as cachedAlexander Graf1-0/+9
The bcm2835 frame buffer is in RAM, so we can easily map it as cached and gain all the glorious performance boost that brings with it. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-06video: bcm2835: use bus_to_phys() on FB addressStephen Warren1-1/+3
The FB address is generated by the firmware running on the GPU/VideoCore and is a "bus" address. This address is the other side of an IOMMU from the ARM upon which U-Boot is running. Use bus_to_phys() to convert this to an ARM physical address. Without this, U-Boot seems to work just fine, but once the Linux kernel boots on an RPi2, accessing the FB memory often causes a hard system hang. This is related to: 122426d46e31 ARM: bcm2835: use phys_to_bus() for mbox 5c0beb5c58c8 usb: dwc2: use phys_to_bus/bus_to_phys 79340db7f1f6 ARM: bcm2835: implement phys_to_bus/bus_to_phys Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-09-12Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass1-0/+1
Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-13ARM: bcm283x: Allocate all mailbox buffers cacheline alignedAlexander Stein1-2/+2
The mailbox buffer is required to be at least 16 bytes aligned, but for cache invalidation and/or flush it needs to be cacheline aligned. Use ALLOC_CACHE_ALIGN_BUFFER for all mailbox buffer allocations. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2013-11-12video: bcm2835: respect the pitch valueAndre Heider1-0/+11
Depending on the firmware's video options [1] the active SDTV or HDTV mode can yield a framebuffer with noncontiguous horizontal lines, giving a messed up display, for both, u-boot and the loaded kernel. Fix this by setting lcd_line_length to the pitch value of the configured framebuffer. [1] http://elinux.org/RPiconfig#Video_mode_options Signed-off-by: Andre Heider <a.heider@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk1-12/+1
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-03-29video: bcm2835: fix build issuesAnatolij Gustschin1-11/+0
After merging LCD patches for v2013.04 the bcm2835 video driver building is broken due to removal of many global variables. Fix the driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org>
2013-03-20video: add a driver for the bcm2835Stephen Warren1-0/+127
The firmware running on the bcm2835 SoC's VideoCore CPU manages the display controller. Add a simple "LCD" driver that communicates with the firmware using the property mailbox protocol. This configures the display and frame-buffer to match whatever physical resolution the firmware chosen when booting, which is typically the native resolution of the attached display device, presumably unless otherwise specified in config.txt on the boot media. Enable this driver in the Raspberry Pi board configuration. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-05 12:15:25 +0300