summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-07-07wdt: Unify option of timeout valueAndy Shevchenko1-1/+1
There is no need to duplicate same option with different name. Kill HW_WATCHDOG_TIMEOUT_MS in favor of WATCHDOG_TIMEOUT_MSECS. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-07wdt: Fix spelling Resettting -> ResettingAndy Shevchenko1-1/+1
Fix spelling Resettting -> Resetting. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko6-15/+7
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06gpio: add static to get_function()Masahiro Yamada1-2/+2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-06serial: make serial_stub_* to static functionsMasahiro Yamada2-6/+9
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-04powerpc: remove 4xx supportHeiko Schocher10-2641/+3
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-04drivers, block: remove sil680 driverHeiko Schocher2-90/+0
driver is not used anymore, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29drivers, usb, gadget: fix compiler warnings for at91_udc.cHeiko Schocher1-71/+1
fix warnings: drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init' defined but not used [-Wunused-function] drivers/usb/gadget/at91_udc.c:1379:13: warning: 'at91rm9200_udc_pullup' defined but not used [-Wunused-function] drivers/usb/gadget/at91_udc.c:1476:12: warning: 'at91sam9263_udc_init' defined but not used [-Wunused-function] Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29usb: gadget: Call g_dnl_bind_fixup() before testing g_dnl_serial lengthLukasz Majewski1-1/+2
After the commit SHA1: 842778a091 - the serial number descriptor is only visible when we have non zero length of g_dnl_serial. However, on some platforms (e.g. Siemens) the serial number is set at g_dnl_bind_fixup(), so with the current code we will always omit the serial (since it is not set). This commit moves the g_dnl_bind_fixup() call before the g_dnl_serial length test. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de>
2017-06-28ti816x: Enable ethernet supportTom Rini2-21/+41
The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-27Merge git://git.denx.de/u-boot-x86Tom Rini1-60/+26
2017-06-27Merge git://www.denx.de/git/u-boot-imxTom Rini4-28/+85
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.h
2017-06-27Revert "x86: Convert MMC to driver model"Bin Meng1-60/+26
This reverts commit ddb3ac3c716f56cead695444e65a7ba7b0946555. With MMC converted to driver model, SCSI driver is broken due to zero address access at (ops->read) in block_dread() function. The fix (SCSI driver converted to DM) is ready in u-boot-dm branch, but it is too late for this relese to get that in. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-26Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini1-2/+2
2017-06-26i2c_eeprom: add static to i2c_eeprom_std_ops/probeMasahiro Yamada1-2/+2
These are only used in drivers/mis/i2c_eeprom.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-25Merge git://git.denx.de/u-boot-uniphierTom Rini2-10/+10
- fix sparse warnings - sync DT with Linux - add new board support (LD11/LD20 global)
2017-06-25ARM: uniphier: fix various sparse warningsMasahiro Yamada2-10/+10
Fix warnings reported by sparse: - ... was not declared. Should it be static?" - cast to restricted __be32 While fixing those, the type conflict of cci500_init() was found. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-23Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini1-3/+3
2017-06-23rockchip: clk: rk3036: correct setting for pll integer modeKever Yang1-3/+3
According to rk3036 TRM, pll_con1[12] should be set to '1' for the pll integer mode, while the '0' means the frac mode. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-23serial, kconfig: fix menutextHeiko Schocher1-2/+2
fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL. Both have the same text as DM_SERIAL, which is confusing. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-06-23mtd: OneNAND: Fix onenand_block_markbadLadislav Michl1-1/+5
commit dfe64e2c89731a3f9950d7acd8681b68df2bae03 Author: Sergey Lapin <slapin@ossfans.org> Date: Mon Jan 14 03:46:50 2013 +0000 mtd: resync with Linux-3.7.1 modified onenand_block_markbad to call mtd_block_markbad, but as _block_markbad function pointer used by mtd_block_markbad to do actual job is by default pointing back to onenand_block_markbad there is no way this function ever finishes its job. Fix it by changing function body according current (4.12-rc6) linux implementation. Tested on IGEPv2 board with Muxed OneNAND(DDP) 512MB containing several unerasable blocks this function marked bad. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-06-23onenand_spl_simple: Add DDP OneNAND supportLadislav Michl1-4/+25
Current implementation is unable to access second half of DDP OneNAND flash (reads first half mirrored). Use block and bufferram address calculations from onenand_base to fix this. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-06-23onenand_spl_simple: Call onenand_spl_get_geometry() only onceLadislav Michl1-2/+5
Do not call onenand_spl_get_geometry() for each block read. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-06-23clk_rv1108.c: Fix unused variable warningTom Rini1-3/+0
The variables gpll_init_cfg and apll_init_cfg are unused in this file, remove them. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-23pinctrl: a3700: Fix the issue that gpio controller is registered with wrong ↵Ken Ma1-1/+1
node id In armada_37xx_gpiochip_register, the return value of fdtdec_get_bool should be true when gpio-controller is found; current codes makes a wrong inverse return value judgement, this patch fixes it. Signed-off-by: Ken Ma <make@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2017-06-23pinctrl: a3700: Fix uart2 group selection register maskKen Ma1-2/+3
If north bridge selection register bit1 is clear, pins [10:8] are for SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn and CTSn, so bit1 should be added to uart2 group and it must be set for both "gpio" and "uart" functions of uart2 group. Signed-off-by: Ken Ma <make@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2017-06-21Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini1-1/+1
2017-06-21Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblazeTom Rini3-18/+15
Xilinx changes for v2017.07 ZynqMP: - config cleanup - SD LS mode support - psu_init* cleanup - unmap OCM - Support for SMC Zynq: - add ddrc to Kconfig - add topic-miamilite board support
2017-06-20tegra: mmc: Set the bus width correctlySimon Glass1-1/+1
The driver currently does not reset bit 5 of the hostctl register even if the MMC stack requests it. Then means that once a bus width of 8 is selected it is not possible to change it back to 1. This breaks 'mmc rescan' which needs to start off with a bus width of 1. The problem was surfaced by enabling CONFIG_DM_MMC_OPS on tegra. Without this option the MMC stack fully reinits the driver on a 'mmc rescan'. But with this option driver model does not re-probe a driver once it has been probed once. Fix the driver to honour the request. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Chubb <peter.chubb@data61.csiro.au> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-20arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfigMike Looijmans1-0/+7
Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20fpga: zynqmppl: Reuse invoke_smc routineSiva Durga Prasad Paladugu1-17/+8
Reuse invoke_smc() routine which is already defined instead of duplicating same at multiple places. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20block: sata: ceva: drop extraneous netdev.h includePeter Robinson1-1/+0
Drop include of netdev.h as it's a SATA driver not a network driver. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-18at91_udc.c: Fix unused variable warningTom Rini1-10/+0
With gcc-6 and later we see warnings that at91sam9263_udc_caps and at91rm9200_udc_caps are unused. Fixes: 620197670a69 ("usb: gadget: at91_udc: add at91_udc into U-Boot") Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-06-17drivers/usb/ehci: Use platform-specific accessorsAlexey Brodkin1-6/+4
Current implementation doesn't allow utilization of platform-specific reads and writes. But some arches or platforms may want to use their accessors that do some extra work like adding barriers for data serialization etc. Interesting enough OHCI accessors already do that so just aligning EHCI to it now. This is a resend of http://patchwork.ozlabs.org/patch/726714/ Back in the day this patch broke some PPC and Sandbox boards as they we missing inclusion of "asm/io.h". Those missing items were fixed with: 1) http://patchwork.ozlabs.org/patch/751397/ 2) http://patchwork.ozlabs.org/patch/771099/ So now it should be safe to apply this patch. FWIW TravisCI builds everything with all 3 patches in place, see https://travis-ci.org/abrodkin/u-boot/builds/239563813 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2017-06-17usb: dwc2: force to host mode if not support HNP/SRPMeng Dongyang1-3/+16
In current code, after running the command of "usb start", the controller will keep in otg mode and can't switch to host mode if not support SNP/SRP capability. So add the property of "hnp-srp-disable" in the DTS to config the contrller work in force mode of host. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
2017-06-16powerpc, 5xx: remove some "5xx" remainsHeiko Schocher1-1/+0
we removed 5xx support. So delete some forgotten remains. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 82xx: remove some missed mpc82xx remainsHeiko Schocher1-2/+0
we removed 82xx support. Missed some 82xx remains, remove them now. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher19-3235/+3
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada5-10/+10
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-15Merge git://git.denx.de/u-boot-mpc85xxTom Rini2-1/+8
2017-06-12net: phy: marvell: Fix init function for m88e1145York Sun1-1/+4
Commit a058052c changed the generic phy_reset() to clear all bits in BMCR. This inevitably clears the ANEG bit. m88e1145 requires any change to ANEG bit to be followed by a software reset. This seems to be different from other PHYs. Implement read-modify-write procedure for this PHY init. Signed-off-by: York Sun <york.sun@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-12driver: ddr: fsl: Fix compiling error for DDR2York Sun1-0/+4
Fix compiling error of "no member named 'taamin_ps'" for DDR2. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12dm: bcm6345_gpio: Set proper output level in bcm6345_gpio_direction_outputAxel Lin1-0/+2
Current code does not set output level in bcm6345_gpio_direction_output, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com>
2017-06-12serial: stm32x7: simplify baud rate register calculationPatrice Chotard2-7/+17
Simplify baud rate register formula and use the oversampling uart feature. This code is aligned with what is implemented in kernel driver drivers/tty/serial/stm32-usart.c since kernel v4.9. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-06-12serial: stm32x7: align compatible with kernel onePatrice Chotard1-2/+2
stm32x7.c driver is dedicated for STM32F7. In kernel, "st,stm32-usart" and "st,stm32-uart" compatible strings are dedicated for STM32F4. To keep U-boot and kernel aligned, replace the serial compatible string from "st,stm32-usart", "st,stm32-uart" to "st,stm32f7-usart", "st,stm32f7-uart" specific for STM32F7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-06-12dm: core: Supress dead-code warning in __of_get_next_child()Simon Glass1-0/+6
Suppress a warning on next = next->sibling. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 163245) Fixes 644ec0a (dm: core: Add livetree access functions)
2017-06-12powerpc, 8260: remove support for mpc8260Heiko Schocher4-39/+1
There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher15-2395/+0
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-11Merge git://git.denx.de/u-boot-dmTom Rini8-79/+119
2017-06-10Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini6-15/+133
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-19 17:32:13 +0300