summaryrefslogtreecommitdiff
path: root/include/configs/ti_armv7_keystone2.h
AgeCommit message (Collapse)AuthorFilesLines
2021-09-04ti: Convert CONFIG_TI_EDMA3 to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_TI_EDMA3 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-09-01Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini1-4/+0
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usageTom Rini1-1/+0
At this point in time, there's no systems with "U-Boot environment exists on an EEPROM which is accessed over the I2C bus" that sets this option. Drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30arm: keystone2: Rename CONFIG_ENV_KS2_BOARD_SETTINGSTom Rini1-1/+1
Rename CONFIG_ENV_KS2_BOARD_SETTINGS to ENV_KS2_BOARD_SETTINGS so that it better fits with the rest of the environment addition macros. Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Remove dead CONFIG optionsAdam Ford1-1/+0
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-11spi: davinci: Drop non-dm codeJagan Teki1-9/+0
Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2020-06-11ks2_evm: Switch to DM_SPL, SPL_OF_CONTROLJagan Teki1-8/+0
This would make SPL build to DM_SPL, SPL_OF_CONTROL. Build fine with but not tested. Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-02-13ARM: keystone2: enable initrd fixup for LPAE addressingTero Kristo1-0/+1
Keystone2 u-boot loads the initrd image into non-LPAE addressed memory but linux kernel is running in LPAE. This causes a conflict as kernel detects that non-memory address is passed and kernel ignores initrd. There is an existing fixup logic to modify the address in the proper configuration, but this is disabled at the moment. Enable the fixup by setting the env variable for this so that initrd can be used properly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-04ARM: keystone2: update the default addresses of the secure monitorJean-Jacques Hiblot1-2/+2
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-08-26Convert CONFIG_SYS_SPI_U_BOOT_OFFS to KconfigHannes Schmelzer1-3/+0
This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-26moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 3Hannes Schmelzer1-1/+3
Exact two boards are referencing CONFIG_SYS_SPI_U_BOOT_OFFS to another define, we replace this manually with the value for having a clean run of moveconfig.py afterwards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-26mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to KconfigStefan Roese1-1/+0
Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs, headers and whitelist. Please note that this symbol already was used in Kconfig (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was not available in Kconfig. This changes now with this patch and all boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what I also need on my GARDENA AT91SAM based board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> [trini: Rework such that the configs are unchanged to start with] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-26Convert CONFIG_ARCH_CPU_INIT to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Felix Brack <fb@ltec.ch>
2019-08-23Convert CONFIG_MX_CYCLIC to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_MX_CYCLIC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: David Lechner <david@lechnology.com>
2019-08-20configs: Rename environment variable fit_bootfile to name_fitAndrew F. Davis1-8/+5
Like we did with 'fit_loadaddr' to 'addr_fit', the variable 'fit_bootfile' contains a name and so should be prefixed with name_. Make this change here. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-08-20configs: Rename environment variable fit_loadaddr to addr_fitAndrew F. Davis1-6/+6
This is the first part of a larger effort I would like to propose to unify and simplify the default set of environment variables. When many early environment variables were named there were fewer images being loaded, usually just a kernel. At this time names like 'loadaddr' would suffice. Now we have more images and many more commands that act on them, often re-using the same variable for several different uses. The contents of a variable are also not immediately known causing one to have to look up a chain of variables to understand what a command is actually doing. I suggest the following. To start, all variables containing names should be prefixed with name_ and addresses with addr_. This is like how K2 already does things and allows for simple universal commands like: get_fdt_nfs=nfs ${addr_fdt} /boot/${name_fdt} Which is very clear on what is intended here and would work across all board that using the this naming convention. We can do this one variable at a time, start here with addr_fit. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Andreas Dannenberg <dannenberg@ti.com>
2019-05-18CONFIG_SYS_[DI]CACHE_OFF: convert to KconfigTrevor Woerner1-1/+0
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig parameters; only for the ARC architecture. This patch turns these two parameters into Kconfig items everywhere else they are found. All of the include/configs/* and defconfig changes in this patch are for arm machines only. The Kconfig changes for arc, nds32, riscv, and xtensa have been included since these symbols are found in code under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined include/configs/* or defconfigs for these architectures exist which include these symbols. These results have been confirmed with tools/moveconfig.py. Acked-by: Alexey Brodkin <abrodkin@snopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Re-migrate for a few more boards] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-30configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt1-1/+0
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-12ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common placeTom Rini1-2/+3
The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific notion but rather "where is our previous stage loaded in memory?" option. Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for our HS builds that are not using SPL anyhow. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com?
2019-04-12soc: keystone: Merge into ti specific directoryVignesh R1-3/+0
Merge drivers/soc/keystone/ into drivers/soc/ti/ and convert CONFIG_TI_KEYSTONE_SERDES into Kconfig. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-03-26Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay1-1/+0
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-26Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay1-1/+0
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-12-14configs: k2g_evm: Enable DFU on K2G EVMJean-Jacques Hiblot1-0/+12
The K2G evm uses the generic DWC3 driver. DFU can thus be enabled. Enabling DFU for easier firmware update. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: host: replace xhci-keystone driver by the generic dwc3 driverJean-Jacques Hiblot1-7/+0
The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-05configs: net: convert DRIVER_TI_KEYSTONE_NET kconfigGrygorii Strashko1-1/+0
Convert DRIVER_TI_KEYSTONE_NET to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-08-17Convert CONFIG_SYS_I2C_DAVINCI to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-17Convert CONFIG_MISC_INIT_R to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-17Convert CONFIG_MII et al to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini1-1/+0
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23Convert CONFIG_MTD_PARTITIONS et al to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-22Convert CONFIG_NAND_DAVINCI to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_NAND_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-05-15treewide: Move CONFIG_PHY_MARVELL to KconfigMario Six1-1/+0
The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards already had it in their Kconfig), but had not been moved for older boards. Move it to the defconfigs for all boards. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-29arm: move SYS_ARCH_TIMER to KConfigAndre Przywara1-1/+0
SYS_ARCH_TIMER guards the usage of the ARM Generic Timer (aka arch timer) in U-Boot. At the moment it is mandatory for ARMv8 and used by a few ARMv7 boards. Add a proper Kconfig symbol to express this dependency properly, allowing certain board configuration to later disable arch timer in case there are any problems with it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [tuomas: rebase + fix conflicts and resync with moveconfig & use select] Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2018-04-11spl: spi: Move CONFIG_SPL_SPI_LOAD to KconfigMarek Vasut1-1/+0
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-03-16Convert all of CONFIG_CONS_INDEX to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-24Convert CONFIG_BOOTP_BOOTPATH et al to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-11configs: Migrate CONFIG_SYS_TEXT_BASETom Rini1-3/+0
On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-23Convert CONFIG_DAVINCI_SPI to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_DAVINCI_SPI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-19configs: keystone2: env: Fix burn_uboot_spi commandFaiz Abbas1-1/+1
Now the u-boot spi image is greater than 0x90000, increase the same in env during spi erase. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-11-05Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULTTom Rini1-4/+0
We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-29configs: keystone2: env: Fix burn_uboot_spi commandLokesh Vutla1-1/+1
Now the u-boot spi image is greater than 0x80000, increase the same in env during spi erase. Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-02Convert CONFIG_SYS_I2C_BUS_MAX to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_BUS_MAX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Fix AM43XX drop AM44XX] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-02Configs: Migrate I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAXAdam Ford1-1/+1
For consistency with other platforms and in preparation of Kconfig migration, let's change Several TI platforms that use I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAX Signed-off-by: Adam Ford <aford173@gmail.com>
2017-08-15common: Move CONFIG_BOOTARGS to KconfigSam Protsenko1-2/+0
Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-11Convert CONFIG_CMD_SAVES to KconfigSimon Glass1-3/+0
This converts the following to Kconfig: CONFIG_CMD_SAVES Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07Move PHYLIB to KconfigAlexandru Gagniuc1-1/+0
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 02:13:36 +0300