summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-09-11environment: ti: mmc.h: Make the finduuid generic for usage across different ↵Aswath Govindraju1-1/+1
device types Make finduuid generic by making it dependent on the boot variable. For example, this can now be used for finding the uuid of partitions in usb device too. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-11ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGSDerald D. Woods1-40/+5
This commit uses the existing DEFAULT_MMC_TI_ARGS and DEFAULT_FIT_TI_ARGS defintions to replace the 'mmc*' environment variables in the configuration. The check for the 'boot_fit' is handled like the 'am335x_*' boards with 'CONFIG_BOOTCOMMAND'. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2021-09-10arm: mvebu: a38x: Fix 5200000 baudratePali Rohár1-1/+1
Fix baudrate value 5150000 which was added in commit ead4864fa6cc ("arm: mvebu: a38x: Define supported UART baudrates"). Exact value for divisor 3 with 250 MHz TCLK is 5208333 baudrate. In above commit I incorrectly rounded it to 5150000 value due to testing with USB-UART hw which incorrectly reported exact value and divisor configured on other other end of UART link. Fix this value to 520000 baudrate which is more close to the exact hardware value and also has less fraction parts. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: ead4864fa6cc ("arm: mvebu: a38x: Define supported UART baudrates") Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-08image: Drop IMAGE_ENABLE_{MD5, CRC32} #definesAlexandru Gagniuc1-20/+0
These are no longer used, so drop them. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-08common: Move MD5 hash to hash_algo[] array.Alexandru Gagniuc2-2/+5
MD5 is being called directly in some places, but it is not available via hash_lookup_algo("md5"). This is inconsistent with other hasing routines. To resolve this, add an "md5" entry to hash_algos[]. The #ifdef clause looks funnier than those for other entries. This is because both MD5 and SPL_MD5 configs exist, whereas the other hashes do not have "SPL_" entries. The long term plan is to get rid of the ifdefs, so those should not be expected to survive much longer. The md5 entry does not have .hash_init/update/finish members. That's okay because hash_progressive_lookup_algo() will catch that, and return -EPROTONOSUPPORT, while hash_lookup_algo() will return the correct pointer. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Use CONFIG_IS_ENABLED not IS_ENABLED for MD5 check] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-08common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASHAlexandru Gagniuc1-1/+1
All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all references to CONFIG_[ST]PL_HASH_SUPPORT. This means we need for CHAIN_OF_TRUST to select SPL_HASH now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-08common: Remove unused CONFIG_FIT_SHAxxx selectorsAlexandru Gagniuc1-3/+0
Originally CONFIG_FIT_SHAxxx enabled specific SHA algos for and only for hash_calculate() in common/image-fit.c. However, since commit 14f061dcb1 ("image: Drop IMAGE_ENABLE_SHAxxx"), the correct selector was changed to CONFIG_SHAxxx. The extra "_FIT_" variants are neither used, nor needed. Remove them. One defconfig disables FIT_SHA256, which is now changed to 'SHA256'. CMD_MVEBU_BUBT needs to select select SHA256 to avoid undefined references to "sha256_*()". bubt.c needs sha256, so this selection is correct. It is not clear why this problem did not manifest before. Note that SHA selection in SPL is broken for this exact reason. There is no corresponding SPL_SHAxxx. Fixing this is is beyond the scope of this change. Also note that we make CONFIG_FIT now imply SHA256, to make up for FIT_SHA256 previously being a default y option. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add imply SHA256 to FIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-07riscv: enable booting HiFive Unmatched from SATAHeinrich Schuchardt1-0/+3
On the HiFive Unmatched a PCI to SATA adapter may be used to install a SATA drive. Enable booting from it. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2021-09-04efi_loader: fix efi_tcg2_hash_log_extend_event() parameter checkMasahisa Kojima1-0/+2
TCG EFI Protocol Specification defines that PCRIndex parameter passed from caller must be 0 to 23. TPM2_MAX_PCRS is currently used to check the range of PCRIndex, but TPM2_MAX_PCRS is tpm2 device dependent and may have larger value. This commit newly adds EFI_TCG2_MAX_PCR_INDEX macro, it is used to check the range of PCRIndex parameter. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-04efi_loader: fix boot_service_capability_min calculationMasahisa Kojima1-1/+1
TCG EFI Protocol Specification requires to the input ProtocolCapability.Size < size of the EFI_TCG2_BOOT_SERVICE_CAPABILITY up to and including the vendor ID field. Current implementation does different calculation, let's fix it. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-04efi_loader: efi_auth_var_type for AuditMode, DeployedModeHeinrich Schuchardt1-0/+1
Writing variables AuditMode and DeployedMode serves to switch between Secure Boot modes. Provide a separate value for these in efi_auth_var_type. With this patch the variables will not be read from from file even if they are marked as non-volatile by mistake. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-04efi_loader: don't load signature database from fileHeinrich Schuchardt1-1/+4
The UEFI specification requires that the signature database may only be stored in tamper-resistant storage. So these variable may not be read from an unsigned file. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-01arm: mvebu: a38x: Define supported UART baudratesPali Rohár1-0/+9
Define all standard baudrates plus 3 non-standard high speed: 3125000 4000000 5150000 3125000 matches divisor 5 with 250 MHz TCLK and divisor 4 with 200 MHz TCLK. 4000000 is the rounded value for divisor 4 with 250 MHz TCLK (3906250) and divisor 3 with 200 MHz TCLK (4166666). 5150000 is the rounded value (5208333) for divisor 3 with 250 MHz TCLK. Testing showed that rounded value is more stable then exactly calculated. And it is the highest possible baudrate which is stable on A38x platform. Any other baudrate values above 2500000 are unstable, which is reason why e.g. standard value 3000000 is not defined, and it is needed to use non-standard value 3125000. Tested all defined UART baudrates on Turris Omnia (A38x with 250 MHz TCLK). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-27Merge tag 'xilinx-for-v2021.10-rc3' of ↵Tom Rini3-66/+308
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()
2021-08-26mmc: zynq_sdhci: Move setting tapdelay code to driverAshok Reddy Soma1-34/+0
Move tapdelay function calls to zynq_sdhci.c and make them static inline. zynqmp_tap_delay.h has function prototypes for the functions defined in tap_delays.c, which will not be needed anymore. Remove tap_delays.c and zynqmp_tap_delay.h files. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-26mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelaysAshok Reddy Soma1-6/+19
Currently xilinx sdhci driver is using zynqmp_mmio_write() to set tapdelay values and DLL resets. Continue to use this for SPL and mini U-Boot where U-Boot will be executed at EL3 level. Use firmware call xilinx_pm_request() using appropriate arguments to set input/output tapdelays and also for DLL resets in regular flow(EL2). Host driver should explicitly request DLL reset before ITAP (assert DLL) and after OTAP (release DLL) to avoid issues in some cases. Also handle error return where possible. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-25Merge branch 'next-socfpga' of https://github.com/tienfong/uboot_mainlineTom Rini3-2/+117
2021-08-25include: configs: Add Intel N5X device CONFIGsSiew Chin Lim1-0/+45
Add CONFIGs for N5X. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25drivers: clk: Add clock driver for Intel N5X deviceSiew Chin Lim1-0/+71
Add clock manager driver for N5X. Provides clock initialization and get_rate functions. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.hSiew Chin Lim1-1/+1
Rename to common file name to used by all SOC64 devices and change "_S10_" to "_SOC64_" in base_addr_soc64.h. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-23Merge tag 'efi-2021-10-rc3' of ↵Tom Rini4-15/+89
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc3 Documentation: * Rename Freescale to NXP * Document structures used for the UEFI TCG2 protocol UEFI: * Device paths must use EfiBootServicesData
2021-08-23Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini4-19/+3
fsl-qoriq: Fixes related to env, spi, usb, crypto, configs, distro-boot for Layerscape Boards like lx2, sl28, ls2088ardb. powerpc: Fixes for t208xrdb revd board and cortina related configs update for T208xRDB, T4240RDB.
2021-08-22i2c: add dm_i2c_reg_clrsetSebastian Reichel1-0/+14
Add function to apply a bitmask to an i2c register, so that specific bits can be cleared and/or set. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-20configs: lx2160a: load device-tree in RAM for distro bootPriyanka Jain1-0/+3
Update boot-commands to load device-tree from boot-device at 'fdt_addr_r' address in DDR during distro-boot. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to KconfigKuldeep Singh3-18/+0
Use moveconfig.py script to convert below defines to Kconfig and move these entries to defconfigs. CONFIG_CORTINA_FW_ADDR CONFIG_CORTINA_FW_LENGTH Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18arm: Finish migration of HAS_FSL_XHCI_USBTom Rini1-1/+0
This symbol was largely migrated, except for one case. Update it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-17efi_loader: use correct type for AllocatePages, AllocatePoolHeinrich Schuchardt1-4/+5
Use enum efi_memory_type and enum_allocate_type in the definitions of the efi_allocate_pages(), efi_allocate_pool(). In the external UEFI API leave the type as int as the UEFI specification explicitely requires that enums use a 32bit type. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-08-17efi_loader rename enum efi_mem_type to efi_memory_typeHeinrich Schuchardt2-2/+2
Use the same name as in the UEFI specification to avoid confusion. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-08-17efi_loader: use an enum for the memory allocation typesHeinrich Schuchardt1-6/+28
For type checking we need an enum. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-08-17efi_loader: add comment for efi_tcg2.hMasahisa Kojima1-3/+54
This commit adds the comment of the TCG Specification efi_tcg2.h file refers, and comment for the structure. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-16dm: crypto: Define UCLASS API for ECDSA signature verificationAlexandru Gagniuc2-0/+40
Define a UCLASS API for verifying ECDSA signatures. Unlike UCLASS_MOD_EXP, which focuses strictly on modular exponentiation, the ECDSA class focuses on verification. This is done so that it better aligns with mach-specific implementations, such as stm32mp. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-14efi_loader: add ExitBootServices() measurementMasahisa Kojima1-0/+1
TCG PC Client PFP spec requires to measure "Exit Boot Services Invocation" if ExitBootServices() is invoked. Depending upon the return code from the ExitBootServices() call, "Exit Boot Services Returned with Success" or "Exit Boot Services Returned with Failure" is also measured. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Swap two ifs in efi_exit_boot_services(). efi_tcg2_notify_exit_boot_services must have EFIAPI signature. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14efi_loader: add boot variable measurementMasahisa Kojima2-1/+21
TCG PC Client PFP spec requires to measure "Boot####" and "BootOrder" variables, EV_SEPARATOR event prior to the Ready to Boot invocation. Since u-boot does not implement Ready to Boot event, these measurements are performed when efi_start_image() is called. TCG spec also requires to measure "Calling EFI Application from Boot Option" for each boot attempt, and "Returning from EFI Application from Boot Option" if a boot device returns control back to the Boot Manager. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-08-14efi_loader: add secure boot variable measurementMasahisa Kojima1-0/+20
TCG PC Client PFP spec requires to measure the secure boot policy before validating the UEFI image. This commit adds the secure boot variable measurement of "SecureBoot", "PK", "KEK", "db", "dbx", "dbt", and "dbr". Note that this implementation assumes that secure boot variables are pre-configured and not be set/updated in runtime. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-08-14efi_loader: Uri() device path nodeHeinrich Schuchardt1-0/+6
iPXE used Uri() device path nodes. So we should support them in the device path to text protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-12Merge tag 'u-boot-rockchip-20210812' of ↵Tom Rini3-6/+36
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Rockchip SFC driver support; - DTS sync from kernel; - emmc hs400 support for rk3399; - Fix for spinore bootdevice and MMC boot order;
2021-08-11Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flashTom Rini2-2/+2
- Some CFI flash related fixups (Kconfig & header) (Bin) - Enable CFI flash support on the QEMU RISC-V virt machine. (Bin)
2021-08-11Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini17-25/+6
- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony) - mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel) - mvebu: sata_mv: Fix HDD identication during cold start (Tony) - a37xx: pci: Fix handling PIO config error responses (Pavel) - Other minor misc changes and board maintainer updates
2021-08-11Merge tag 'u-boot-amlogic-20210810' of ↵Tom Rini4-59/+206
https://source.denx.de/u-boot/custodians/u-boot-amlogic - odroid-n2: fix fdtfile suffix for n2-plus - sei610 & meson64_android cleanups to prepare android 11 boot support - use Android BCB mechanism for reboot reason instead of HW reboot flag - Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
2021-08-11rockchip: rk3188-power: sync power domain dt-binding header from LinuxJohan Jonker1-0/+24
In order to update the DT for rk3188 sync the power domain dt-binding header. This is the state as of v5.12 in Linux. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11rockchip: rk3188-cru-common: sync clock dt-binding header from LinuxJohan Jonker1-3/+9
In order to update the DT for rk3066 and rk3188 sync the clock dt-binding header. This is the state as of v5.12 in Linux. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11rockchip: Fix MMC boot orderAlex Bee1-3/+3
Basically all, i.e. rk3036.dtsi, rk3128.dtsi, rk3xxx.dtsi, rk322x.dtsi, rk3288.dtsi, rk3308-u-boot.dtsi, rk3328-u-boot.dtsi, rk3399-u-boot.dtsi and px30-u-boot.dtsi Rockchip SoC devicetrees which have mmc indexes are defining eMMC as mmc0 and sdmmc as mmc1. This means that the rule to try to boot from the SD card first is ignored, which as per comment is what we want and is important for distros, which rely on that. Fix this by setting the correct mmc index, i.e. first from mmc1 (SD card), second from mmc0 (eMMC). Signed-off-by: Alex Bee <knaerzche@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-11riscv: qemu: Enable MTD NOR flash supportBin Meng1-0/+2
Enable support to the 2 NOR flashes on the QEMU RISC-V virt machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11flash.h: Remove CONFIG_SYS_FLASH_CFI from flash_info_tBin Meng1-2/+0
Those embers wrapped with CONFIG_SYS_FLASH_CFI in struct flash_info_t are unconditionally used in the cfi_flash.c driver. Drop the #ifdefs in the definition of flash_info_t. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: Do not overwrite CONFIG_SYS_TCLKPali Rohár2-7/+0
Config option CONFIG_SYS_TCLK is set by kw88f6281.h and kw88f6192.h files to correct SOC/platform value. So do not overwrite it in board config include files. Kirkwood 88F6180 and 88F6192 uses 166 MHz TCLK and Kirkwood 88F6281 uses 200 MHz TCLK. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: axp: Set CONFIG_SYS_TCLK globallyPali Rohár4-4/+0
This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of manual configuration in every board file. Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove useless default CONFIG_SYS_TCLK value from the end of soc.h file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: msys: Set CONFIG_SYS_TCLK globallyPali Rohár2-2/+0
This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of manual configuration in every board file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR registerPali Rohár1-1/+0
Bit 20 in SAR register specifies if TCLK is running at 200 MHz or 166 MHz. Use this information instead of manual configuration in every board file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR registerPali Rohár7-11/+0
Bit 15 in SAR register specifies if TCLK is running at 200 MHz or 250 MHz. Use this information instead of manual configuration in every board file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: GoFlex Home: Add DM SATA configsTony Dinh1-0/+6
Enable DM SATA in board file. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-08 23:29:34 +0300