summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-04-27xilinx: Move initrd_high setup to common locationMichal Simek1-1/+0
Moving to common location initrd_high is also setup for Zynq which hasn't done in run time code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27mmc: zynq: parse dt when probingBenedikt Grassl1-1/+0
Currently, the entry "bus-width = <8>" in the ZynqMP's sdhci nodes is not evaluated. This results in the bus width staying at its default value (4 bit in HS200 mode). Fix this by calling mmc_of_parse. This function also checks for the "no-1-8-v" and "max-frequency" entries. Remove the handling of those nodes from this driver. Signed-off-by: Benedikt Grassl <Benedikt.Grassl@rohde-schwarz.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-24arm: actions: add S700 SoC device treeAmit Singh Tomar2-0/+152
This patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d") and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. It also provisions dts file to be built based on selected platform(CONFIG_MACH_S900/S700). Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: sync dts for Action Semi S900Amit Singh Tomar3-77/+194
Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d". Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: Add common framework for Actions Owl Semi SoCsAmit Singh Tomar1-3/+3
This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24dm: mmc: Update mmc_get_mmc_dev() to use const *Simon Glass1-1/+1
This function does not modify the device to change it to use const *, so that callers with a const udevice * can call it without a cast. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-24pci: Add a macro to convert BDF from linux to U-BootSimon Glass1-0/+3
U-Boot's BDF format has its bits in the same position as the device tree PCI definition. Some x86 devices use linux format in their register format and it is useful to be able to convert to U-Boot format. Add a macro for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24uuid: Use const char * where possibleSimon Glass1-3/+5
Update the arguments of these functions so they can be called from code which uses constant strings. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24lib: Add a function to convert a string to upper caseSimon Glass1-0/+12
Add a helper function for this operation. Update the strtoul() tests to check upper case as well. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24test: Add the beginnings of some string testsSimon Glass1-0/+1
There are quite a few string functions in U-Boot with no tests. Make a start by adding a test for strtoul(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24common/board_f: Make reserve_mmu genericOvidiu Panait1-1/+12
Introduce arch_reserve_mmu to allow for architecture-specific reserve_mmu routines. Also, define a weak nop stub for it. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24fvp: Add support for loading Android boot images via semihostingPeter Collingbourne1-10/+20
FVP now loads an Android boot image named boot.img if available, otherwise it falls back to the existing code path. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-24libfdt: Make fdtdec_get_child_count() available for HOSTKever Yang1-0/+9
The tool need to use fdtdec_get_child_count(), make it available for HOST_CC. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24tool: Move ALIGN_MASK to header as common MACROKever Yang1-1/+0
The ALIGN code is need by many files who need handle structure or image align, so move the macro to imagetool.h file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-24env_internal.h: add alternative ENV_SAVE_PTR macroRasmus Villemoes1-0/+2
The current definition of the env_save_ptr does not take SPL_SAVEENV into account. Moreover, the way it is implemented means that drivers need to guard the definitions of their _save methods with ifdefs to avoid "defined but unused" warnings in case CMD_SAVEENV=n. The ifdeffery can be avoided by using a "something ? x : NULL" construction instead and still have the compiler elide the _save method when it is not referenced. Unfortunately we can't just switch the existing env_save_ptr macro, since that would give a lot of build errors unless all the ifdeffery is removed at the same time. Conversely, removing that ifdeffery first would merely lead to the "defined but unused" warnings temporarily, but for some storage drivers it requires a bit more work than just removing their private CMD_SAVEENV logic. So introduce an alternative to env_save_ptr, which for lack of a better name is simply uppercased, allowing one to update storage drivers piecemeal to both reduce their ifdeffery and honour CONFIG_SPL_SAVEENV. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24make env_entry::callback conditional on !CONFIG_SPL_BUILDRasmus Villemoes1-0/+2
The callback member of struct env_entry is always NULL for an SPL build. Removing it thus saves a bit of run-time memory in the SPL (when CONFIG_SPL_ENV_SUPPORT=y) since struct env_entry is embedded in struct env_entry_node - i.e. about 2KB for the normal case of 512+change hash table entries. Two small fixups are needed for this, all other references to the callback member are already under !CONFIG_SPL_BUILD: Don't initialize .callback in set_flags() - hsearch_r doesn't use that value anyway. And make env_callback_init() initialize ->callback to NULL for a new entry instead of relying on an unused or deleted entry having NULL in ->callback. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24env: remove callback.o for an SPL buildRasmus Villemoes1-0/+6
env.h says this about about callback declarations (U_BOOT_ENV_CALLBACK): * For SPL these are silently dropped to reduce code size, since environment * callbacks are not supported with SPL. So env_callback_init() does a lot of work to not find anything in the guaranteed empty env_clbk list. Drop callback.o entirely from the link and stub out the only public function defined in callback.o. This cuts about 600 bytes from the SPL on my ppc build. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini2-12/+0
- mvebu bubt cmd: Add A38x support (Joel) - Clearfog: Fix SCSI boot duplication (Joel) - Armada-37xx: Fix DDR PHY clock divider values (Marek)
2020-04-22Merge tag 'mmc-2020-4-22' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini4-3/+85
- iproc_sdhci memory leak fix and enable R1B resp quirk - more mmc cmds and several mmc updates from Heinirich - Use bounce buffer for tmio sdhci - Alignment check for tmio sdhci
2020-04-22spl: mmc: Rename spl_boot_partition() to spl_mmc_boot_partition()Harald Seiler1-1/+13
This function is only relevant to the MMC driver so calling it spl_boot_partition() might be confusing. Rename it to spl_mmc_boot_partition() to make its purpose more clear (and bring it in line with spl_mmc_boot_mode()). Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()Harald Seiler1-1/+17
The function's name is misleading as one might think it is used generally to select the boot-mode when in reality it is only used by the MMC driver to find out in what way it should try reading U-Boot Proper from a device (either using a filesystem, a raw sector/partition, or an eMMC boot partition). Rename it to spl_mmc_boot_mode() to make it more obvious what this function is about. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22mmc: Add option to adjust b_max before long readMarek Vasut1-0/+16
Add getter function which permits adjusting the maximum number of blocks that could be read in a single sustained read transfer based on the location of the source/target buffer and length, before such transfer starts. This is mainly useful on systems which have various DMA restrictions for different memory locations, e.g. DMA limited to 32bit addresses, and where a bounce buffer is used to work around such restrictions. Since the U-Boot bounce buffer is mallocated, it's size is limited by the malloc area size, and the read transfer to such a buffer must also be limited. However, as not all areas are limited equally, the b_max should be adjusted accordinly as needed to avoid degrading performance unnecessarily. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-04-22ARM: rmobile: Increase malloc area sizeMarek Vasut1-1/+1
Increase the malloc area size significantly to cater for bounce buffer used by the SDHI driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-04-22common: bouncebuf: Permit passing custom alignment check functionMarek Vasut1-0/+15
Add extended version of the bounce_buffer_start(), which permits passing in a custom alignment checker function for the buffer. This is useful e.g. on systems with various DMA restrictions and where the checker function might be more complex than a simple CPU cache alignment check. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-04-22cmd: mmc: provide boot area protection commandHeinrich Schuchardt1-0/+9
Provide command 'mmc wp' to power on write protect boot areas on eMMC devices. The B_PWR_WP_EN bit in the extended CSD register BOOT_WP is set. The boot area are write protected until the next power cycle occurs. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22mmc: export mmc_send_ext_csd()Heinrich Schuchardt1-0/+11
Export function mmc_send_ext_csd() for reading the extended CSD register. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22mmc: EXT_CSD registers for write protectionHeinrich Schuchardt1-0/+3
Add the EXT_CSD register definition related to write protection. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22arm: mvebu: correct SPL boot configs for SPI/MMCJoel Johnson1-5/+0
Update mvebu SPL boot selection mechanism for the move to driver model usage by ensuring that the required driver support for SPI and MMC booting is available in SPL when the respective boot method is selected. Previously, all mvebu boards selected a boot method (implicitly MVEBU_SPL_BOOT_DEVICE_SPI for many) even if SPL booting wasn't used. This changes mvebu boot method selection to depend on SPL usage which resolves the issue with aarch64 boards which don't use SPL getting an implicit boot device selection resulting in unmet dependencies. The 32-bit arm boards do use SPL, but I'm led to conclude that most aren't intentionally using the MVEBU_SPL_BOOT_DEVICE selection since none have SPL_DM_SPI enabled in their defconfig even though they still implicitly select the SPI boot method. This also results in the new addition of SPL_GPIO_SUPPORT to helios4. The mainline dts for helios4 includes the cd-gpios entry for sdhci with identical addresses as the clearfog dts. I don't have a helios4 board to confirm, but based on the current source conclude that the board itself is either wired to pull the signal low for eMMC, or the default MMC boot isn't fully functional in mainline. In either case, as far as I can tell, including the GPIO support will at least cause no regression. Tested on SolidRun ClearFog devices. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22arm: mvebu: clearfog: adjust SCSI boot duplicationJoel Johnson1-7/+0
Fix duplication resulting from merging of multiple related series. Commits cecf38a75, bd02fd29f, and 201a500de added or adjusted SCSI boot support for ClearFog, but in slightly different locations which didn't result in a merge conflict. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini2-3/+27
- Backplane support and bug fixes
2020-04-21Merge branch '2020-04-17-master-imports'Tom Rini3-81/+65
- Further cleanups for 'make refcheckdocs' - Another BTRFS fix. - Support for automatic decompression of images with booti as well as unlz4 command for manual decompression.
2020-04-20Merge tag 'u-boot-amlogic-20200420' of ↵Tom Rini1-0/+29
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - enable DM_RNG on meson boards - fix SMBIOS info on Odroid-C2 - Fix video output on GXBB/GXL/GXM boards - add USB gadget support for GXL/GXM boards
2020-04-20Merge tag 'ti-v2020.07-rc1' of ↵Tom Rini1-6/+37
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot on am335x guardian board - Increase OPSI speed on AM65x and J721E devices - Use JTAD register for identifying K3 devices. - Update TI entry in MAINTAINERS file.
2020-04-20Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini14-18/+896
2020-04-20generic-phy: add generic_phy_get_by_node()Neil Armstrong1-0/+29
Add generic_phy_get_by_node() to get a PHY phandle from a node instead of a udevice. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com> [narmstrong: fixed by including ofnode.h in generic-phy.h]
2020-04-20phy: add support for backplane kr modeFlorinel Iordache1-0/+23
Add generic support for backplane kr modes currently available: 10gbase-kr, 40gbase-kr4. Remove platform generic fixups (armv8/layerscape and powerpc) for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-18Add support for i.MXRT1020-EVK boardGiulio Benetti1-0/+46
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18dt-bindings: pinctrl: add i.MXRT1020 pins definitionGiulio Benetti1-0/+763
Add i.MXRT1020 pins definition. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-04-18clk: imx: add i.IMXRT1020 clk driverGiulio Benetti1-0/+52
Add i.MXRT1020 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18imxrt1050_evk: add 16bpp video support if video layer enabledGiulio Benetti1-0/+15
i.MXRT1050 provides mxsfb compatible lcd controller, so let's enable video mxsfb driver with 16bpp depth if CONFIG_DM_VIDEO is selected since board has 16bpp only connection. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-17colibri_imx6: enable relocation of fdt and initrdIgor Opaniuk1-2/+0
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17colibri-imx6ull: enable relocation of fdt and initrdIgor Opaniuk1-2/+0
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17apalis_imx6: enable relocation of fdt and initrdIgor Opaniuk1-2/+0
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17colibri_imx7: enable relocation of fdt and initrdIgor Opaniuk1-2/+0
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17colibri_vf: enable relocation of fdt and initrdIgor Opaniuk1-2/+0
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17verdin-imx8mm: add nfsboot wrapper to envIgor Opaniuk1-0/+6
Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17configs: tqma6x_mba6x: update default configs for device modelMichael Krummsdorf2-7/+5
Fixes compilation for WRU4 board. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17mx6ullevk: Enable Ethernet supportFabio Estevam1-0/+9
Add Ethernet support using DM_ETH. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx6ul_evk: Move CONFIG_FEC_MXC to defconfigFabio Estevam1-1/+0
CONFIG_FEC_MXC is supported in Kconfig, so it is preferred to move it to defconfig file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17ata: sort ATA commandsHeinrich Schuchardt1-42/+42
Sort the ATA commands in include/libata.h by number. Add a few more comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-10 16:30:09 +0300