summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini206-575/+1
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08include/u-boot, lib/zlib: add sources for zlib decompressionJoao Marcos Costa1-0/+32
Add zlib (v1.2.11) uncompr() function to U-Boot. SquashFS depends on this function to decompress data from a raw disk image. The actual support for zlib into SquashFS sources will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-08fs/squashfs: new filesystemJoao Marcos Costa2-0/+26
Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-08cmd: Update the memory-search commandSimon Glass1-0/+1
Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-08test: Add a flag for tests that need console recordingSimon Glass1-0/+1
Allow tests that need console recording to be marked, so they can be skipped if it is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-08dm: Rename DM test flags to make them more genericSimon Glass2-9/+10
The test flags used by driver model are currently not available to other tests. Rather than creating two sets of flags, make these flags generic by changing the DM_ prefix to UT_ and moving them to the test.h header. This will allow adding other test flags without confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-08console: Always define the console-recording functionsSimon Glass1-1/+39
On boards without console recording these function are currently missing. It is more convenient for them to be present but to return dummy values. That way if we know that a test needs recording, we can check if it is available, and skip the test if not, while avoiding #ifdefs. Update the header file according and adjust console_record_reset_enable() to return an error if recording is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-08test: Add a way to check part of a console line or skip itSimon Glass1-0/+59
Some lines of the output are not worth testing, or not worth testing in their entirety. For example, when checking a hex dump we know that the hex-dump routine can display ASCII so we only need to check the hex bytes, not the ASCII dump. Add a new test macros which can check only part of a console line. Sometimes it is useful to skip a line altogether, so add a macro for that also. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-06drivers: serial: Make serial_initialize return intOvidiu Panait1-1/+1
serial_initialize is called only during the common init sequence, after relocation (in common/board_r.c). Because it has a void return value, it has to wrapped in initr_serial. In order to be able to get rid of this indirection, make serial_initialize return int. Remove extern from prototype in order to silence the following checkpatch warning: check: extern prototypes should be avoided in .h files Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: Introduce arch_setup_bdinfo initcallOvidiu Panait1-0/+12
Certain architectures (ppc, mips, sh, m68k) use setup board_part1 and setup_board_part2 calls during pre-relocation init to populate gd->bd boardinfo fields. This makes the generic init sequence cluttered with arch-specific ifdefs. In order to clean these arch-specific sequences from generic init, introduce arch_setup_bdinfo weak initcall so that everyone can define their own bdinfo setup routines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: Introduce setup_bdinfo initcallOvidiu Panait1-0/+10
Introduce setup_bdinfo initcall as a generic routine to populate bdinfo fields. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Remove CONFIG_SYS_SRAM_STARTOvidiu Panait2-6/+0
Remove ad-hoc CONFIG_SYS_SRAM_START and use CONFIG_SYS_SRAM_BASE instead. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_SIZE to KconfigOvidiu Panait3-4/+0
This converts ad-hoc CONFIG_SYS_SRAM_SIZE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_BASE to KconfigOvidiu Panait1-1/+0
This converts ad-hoc CONFIG_SYS_SRAM_BASE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini1-1/+0
- r2dplus updates
2020-08-05dt-bindings: Sync include/dt-bindings/phy/phy.h from LinuxMichal Simek1-0/+4
Add 4 new phy types which are present in Linux kernel. DP and SGMII types are used on Xilinx ZynqMP devices. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-05arm: move CONFIG_PREBOOT="usb start" to KConfigJonas Smedegaard1-1/+0
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig for all boards also declaring USB_KEYBOARD. Besides simplifying defconfig files, this also enables support for board-specific CONFIG_PREBOOT for sunxi boards: commit 37304aaf60bf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") intended to support CONFIG_PREBOOT, but include/configs/sunxi-common.h hardcodes preboot as part of internally defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific CONFIG_PREBOOT. Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
2020-08-05lmb/bdinfo: dump lmb info via bdinfoTero Kristo1-0/+1
Dump lmb status from the bdinfo command. This is useful for seeing the reserved memory regions from the u-boot cmdline. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-08-04Merge tag 'u-boot-imx-20200804' of ↵Tom Rini4-0/+82
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-0/+19
- add DM based reset driver for SiFive SoC's.
2020-08-04Merge tag 'mips-pull-2020-08-03' of ↵Tom Rini1-0/+12
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - doc: fix qemu-mips build instructions - MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
2020-08-04dm: core: Guard against including dm.h in header filesSimon Glass1-0/+4
Header files generally should not include header files just for a struct, since forward declarations work just as well and reduce overhead. Add a warning for dm.h being included, since this has crept into U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04net: Drop dm.h header file in eth_phy.hSimon Glass1-1/+2
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04clk: Drop dm.h header file in clk-provider.hSimon Glass2-6/+4
This header file should not be included in other header files. Remove it and use a forward declaration and un-inlining of dev_get_clk_ptr() instead. Fix up the kendryte header files to avoid build errors. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-04efi: Tidy up header includesSimon Glass1-2/+0
Two files relies on efi_driver.h to include common.h and dm.h which is incorrect. The former should always be included in a non-host C file and the latter should be included if driver model is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04w1: Drop dm.h header fileSimon Glass1-1/+1
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04thermal: Drop dm.h header fileSimon Glass1-1/+1
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04sf: Drop dm.h header file from spi_flash.hSimon Glass1-1/+2
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04net: Drop dm.h header file from phy.hSimon Glass3-3/+9
This header file should not be included in other header files. Remove it and use other headers and C inclusions instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04fs: fs-loader: Drop dm.h header fileSimon Glass1-1/+1
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04dm: core: Drop header files from dm/test.hSimon Glass2-3/+1
These header file should not be included in other header files. Remove them and add to each individual file. Add test/test.h to test/ui.h since that is a reasonable place. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04dm: core: Drop dm.h header file from dm-demo.hSimon Glass1-2/+0
This header file should not be included in other header files. Remove it and add it to the cmd file instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04mtd: spi: Drop SPI_XFER_MMAP*Simon Glass1-2/+0
These two defines are no-longer supported. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04mtd: spi-mem: Drop dm.h header fileSimon Glass1-4/+1
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04wdt: Drop dm.h header fileSimon Glass1-3/+1
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also remove the other headers that are not needed, since the inline code was removed in a recent commit: b4d9452c4 ("watchdog: move initr_watchdog() to wdt-uclass.c") Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04dt-bindings: prci: add indexes for reset signals available in prciSagar Shrikant Kadam1-0/+19
Add bit indexes for reset signals within the PRCI module on FU540-C000 SoC. The DDR and ethernet sub-system's have reset signals indicated by these reset indexes. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-08-03clk: clk_octeon: Add simple MIPS Octeon clock driverStefan Roese1-0/+12
This patch adds a simple clock driver for the Marvell Octeon MIPS SoC family. Its for IO clock rate passing via DT in some of the Octeon driver, like I2C. So that we don't need to use the non-mainline API octeon_get_io_clock(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Lukasz Majewski <lukma@denx.de>
2020-08-03imx8m: enlarge CONFIG_SYS_BOOTM_LENPeng Fan3-0/+6
Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with AArch32 mode Linux kernel. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-08-03imx: Add MYiR Tech MYS-6ULX supportParthiban Nallathambi1-0/+76
MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2020-08-02sh: r2dplus: Enable DM_SERIAL and DM_CLKMarek Vasut1-1/+0
Switch r2dplus to DM and DT probing for serial and clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-01efi_loader: Enable run-time variable support for tee based variablesIlias Apalodimas1-0/+74
We recently added functions for storing/restoring variables from a file to a memory backed buffer marked as __efi_runtime_data commit f1f990a8c958 ("efi_loader: memory buffer for variables") commit 5f7dcf079de8 ("efi_loader: UEFI variable persistence") Using the same idea we now can support GetVariable() and GetNextVariable() on the OP-TEE based variables as well. So let's re-arrange the code a bit and move the commmon code for accessing variables out of efi_variable.c. Create common functions for reading variables from memory that both implementations can use on run-time. Then just use those functions in the run-time variants of the OP-TEE based EFI variable implementation and initialize the memory buffer on ExitBootServices() Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-31env: Add support for explicit write access listMarek Vasut1-1/+5
This option marks any U-Boot variable which does not have explicit 'w' writeable flag set as read-only. This way the environment can be locked down and only variables explicitly configured to be writeable can ever be changed by either 'env import', 'env set' or loading user environment from environment storage. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31env: Discern environment coming from external storageMarek Vasut2-2/+6
Add another custom environment flag which discerns environment coming from external storage from environment set by U-Boot itself. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31env: Add H_DEFAULT flagMarek Vasut1-0/+1
Add another internal environment flag which indicates that the operation is resetting the environment to the default one. This allows the env code to discern between import of external environment and reset to default. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31cmd: env: add env select commandPatrick Delaunay1-1/+7
Add the new command 'env select' to force the persistent storage of environment, saved in gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31cmd: env: add env load commandPatrick Delaunay1-0/+7
Add the new command env load to load the environment from the current location gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: the ops driver load becomes mandatory in struct env_driverPatrick Delaunay1-2/+1
The ops driver load becomes mandatory in struct env_drive, change the comment for this ops and remove unnecessary test. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: add prototypes for weak functionPatrick Delaunay1-0/+20
This patch adds prototypes for several weak functions: - env_ext4_get_intf - env_ext4_get_dev_part - env_get_location It solves the following warnings when compiling with W=1 on stm32mp1 board: board/st/stm32mp1/stm32mp1.c:849:19: warning: no previous prototype for 'env_get_location' [-Wmissing-prototypes] enum env_location env_get_location(enum env_operation op, int prio) ^~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:876:13: warning: no previous prototype for 'env_ext4_get_intf' [-Wmissing-prototypes] const char *env_ext4_get_intf(void) ^~~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:889:13: warning: no previous prototype for 'env_ext4_get_dev_part' [-Wmissing-prototypes] const char *env_ext4_get_dev_part(void) ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-30Merge tag 'dm-pull-28jul20' of git://git.denx.de/u-boot-dmTom Rini4-1/+63
Use binman instead of one of the Rockchip build scripts Refactor to allow any arch to create SPI-flash images New button uclass
2020-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini1-1/+1
- fix SPL boot issue due to early dbgmcu_init() call - fix SPL boot issue due to dcache memory region configuration - add support of CONFIG_ENV_IS_IN_MMC - add specific SD/eMMC partition for U-Boot enviromnent - enable env in SPL - use "env info -q" to remove log during boot - remove env location override for dh_stm32mp1 - update management of misc_read - check result of find_mmc_device in stm32prog - use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc - enable CMD_ADTIMG flag to handle Android images - device tree alignment with Linux Kernel v5.8-rc1 - remove hnp-srp-disable for usbotg on dk1 - add reset support to uart nodes on stm32mp15x - use correct weak function name spl_board_prepare_for_linux - use cd-gpios for ST and DHSOM boards - add seeed studio odyssey-stm32mp157c board support - move ethernet PHY into SoM DT - add DHSOM based DRC02 board support
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-15 14:57:55 +0300