summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-11-29Merge tag 'mmc-2020-11-29' of ↵Tom Rini1-0/+4
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - mmc minor update for better debug and error check - fsl_esdhc sysctl set and make sure delay check for HS400
2020-11-29lib/efi_loader: fix ABI in efi_mm_communicate_headerEtienne Carriere1-1/+1
Pack struct efi_mm_communicate_header as done in EDK2 as seen in release 201808 [1]. If not packed sizeof() for the structure adds 4 additional bytes on 32bit targets which breaks the ABI. Link: [1] https://github.com/tianocore/edk2/blob/edk2-stable201808/MdePkg/Include/Protocol/MmCommunication.h#L21 Fixes: 23a397d2e2fb ("efi_loader: Add headers for EDK2 StandAloneMM communication") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-28mmc: fsl_esdhc: make sure delay chain locked for HS400Yangbo Lu1-0/+4
For eMMC HS400 mode, the DLL reset is a required step for mmc rescan. This step has not been documented in reference manual, but the RM will be fixed sooner or later. In previous commit to support eMMC HS400, db8f936 mmc: fsl_esdhc: support eMMC HS400 mode the steps to configure DLL could be found in commit message, 13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL]. 14. Wait for delay chain to lock. these would be fixed as, 13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL]. 13.1 Write DLLCFG0[DLL_RESET] to 1 and wait for 1us, then write DLLCFG0[DLL_RESET] 14. Wait for delay chain to lock. This patch is to add the step of DLL reset, and make sure delay chain locked for HS400. Fixes: db8f93672b42 ("mmc: fsl_esdhc: support eMMC HS400 mode") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-25reset: stm32: Add support of MCU HOLD BOOTPatrick Delaunay1-0/+1
Handle the register RCC_MP_GCR without SET/CLR registers but with a direct access to bit BOOT_MCU: - deassert => set the bit: The MCU will not be in HOLD_BOOT - assert => clear the bit: The MCU will be set in HOLD_BOOT With this patch the RCC driver handles the MCU_HOLD_BOOT_R value added in binding stm32mp1-resets.h Cc: Fabien DESSENNE <fabien.dessenne@st.com> Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-22usb: dwc2: add "u-boot,force-vbus-detection" for stm32Patrick Delaunay1-0/+1
On some board, the ID pin is not connected so the B session must be overridden with "u-boot,force_b_session_valid" but the VBus sensing must continue to be handle. To managed it, this patch adds a new DT field "u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-21Merge tag 'efi-2021-01-rc3-2' of ↵Tom Rini1-2/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc3 (2) The parameter check for UEFI service GetNextVariableName() is corrected. The dependencies of CONFIG_DFU_TFTP are simplified. The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is corrected.
2020-11-21efi_loader: tcg2 protocol updatesIlias Apalodimas1-2/+0
On pull reuqest https://lists.denx.de/pipermail/u-boot/2020-November/432735.html V4 of the patchset was sent instead of the v5. This is the v4->v5 missing diff Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-20microblaze: Detect NOR flash based on DTMichal Simek1-38/+3
Remove fixed configuration and detect flash based on DT. Also increase amount of flash sectors to 2048 because on kc705 flash has 1027 sectors. Bank # 1: CFI conformant flash (16 x 16) Size: 128 MB in 1027 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962 Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Unify of setting for SPL_NOR/XIP supportMichal Simek1-5/+3
XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with using SYS_FLASH_BASE are wrong because it is not aligned with DM. That's why change these macro and align them with TEXT_BASE macro. Information should be find at run time based on DT but implementation is not done yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Remove CONFIG_SYS_FDT_SIZEMichal Simek1-1/+0
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Get rid of xparameters.hMichal Simek1-1/+6
There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Simplify cache handlingMichal Simek1-14/+2
Enable caches by default. For now just simplify config file but it should be read from DT or PVRs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Clean config file from ifdef messMichal Simek1-24/+0
A lot of configs has been moved to Kconfig and it ends up in ifdef mess with no bodies. That's why remove all of them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-19fs/squashfs: implement exists() functionRichard Genoud1-0/+1
This permits to find a file and use the distro_bootcmd Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19km/ppc: use Kconfig for MEMTEST configurationHolger Brunck1-1/+1
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19km: replace hardcoded address for imported environmentMatteo Ghidoni1-4/+4
Instead of using an hard coded address, make use of an already defined address for importing the environment for ramfs and nfs boot. This allows boards having different mapping to use the same code. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-17sunxi: DT: A64: update device tree filesSamuel Holland3-1/+7
Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-16Merge tag 'ti-v2021.01-rc3' of ↵Tom Rini2-15/+9
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix Nokia RX-51 boot issues - Fix CONFIG_LOGLEVEL on K3 devices - Add phyBOARD REGOR support
2020-11-15Nokia RX-51: Remove old comments from configs/nokia_rx51.h filePali Rohár1-10/+0
These comments are relict for old, now removed config options. So remove these obsoleted comments too. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15Nokia RX-51: Convert to CONFIG_DM_I2CPali Rohár1-2/+0
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove CONFIG_SYS_I2C. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15power: twl4030: Add twl4030_i2c_read() functionPali Rohár1-3/+9
Function twl4030_i2c_read() is like twl4030_i2c_read_u8() but instead of single value it rather returns array of values. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-14efi_loader: Add basic EFI_TCG2_PROTOCOL supportIlias Apalodimas2-0/+96
Since U-boot EFI implementation is getting richer it makes sense to add support for EFI_TCG2_PROTOCOL taking advantage of any hardware TPM available on the device. This is the initial implementation of the protocol which only adds support for GetCapability(). It's limited in the newer and safer TPMv2 devices. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14tpm: Add some headers from the specIlias Apalodimas1-0/+77
A following patch introduces EFI_TCG2_PROTOCOL. Add the required TPMv2 headers to support it. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-14efi_selftest: keep devices in ExitBootServices()Heinrich Schuchardt1-0/+3
When calling ExitBootServices during out unit tests we should not detach devices as we need console output for runtime tests. Fixes: 529441ca89b1 ("efi_loader: Disable devices before handing over control") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-06Merge tag 'dm-pull5nov20' of git://git.denx.de/u-boot-dmTom Rini3-93/+156
patman status subcommand to collect tags from Patchwork patman showing email replies from Patchwork sandbox poweroff command minor fixes in binman, tests
2020-11-06Merge tag 'u-boot-amlogic-20201105' of ↵Tom Rini2-5/+9
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - meson64_android: don't show logo on ROM USB boot - doc: update support matrix and fix vim3/l build instructions - meson64: relocate config_distro_bootcmmd header
2020-11-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini10-45/+117
- Add a new SMBIOS parser and enable it when booting from coreboot - Fix up various driver names to avoid dtoc warnings - Fully enable ACPI support on Google Chromebook Coral - Add a way to set SMBIOS properties using the devicetree - Update existing boards to use devicetree for SMBIOS using a new default sysinfo driver
2020-11-06x86: Pass an ofnode into each SMBIOS functionSimon Glass1-1/+4
As a first step to obtaining SMBIOS information from the devicetree, add an ofnode parameter to the writing functions. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06board: Rename uclass to sysinfoSimon Glass2-41/+41
This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06x86: zimage: Add a little more loggingSimon Glass1-0/+1
Add logging for each part of the boot process, using a new Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-11-06x86: Boot coral into Chrome OS by defaultSimon Glass1-1/+8
Add a script to boot Chrome OS from the internal MMC. This involved adding a few commands and options. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06acpi: Don't reset the tables with every new generationSimon Glass1-0/+9
At present if SSDT and DSDT code is created, only the latter is retained for examination by the 'acpi items' command. Fix this by only resetting the list when explicitly requested. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06x86: Allow putting some tables in the bloblistSimon Glass2-0/+12
At present all tables are placed starting at address f0000 in memory, and can be up to 64KB in size. If the tables are very large, this may not provide enough space. Also if the tables point to other tables (such as console log or a ramoops area) then we must allocate other memory anyway. The bloblist is a nice place to put these tables since it is contiguous, which makes it easy to reserve this memory for linux using the 820 tables. Add an option to put some of the tables in the bloblist. For SMBIOS and ACPI, create suitable pointers from the f0000 region to the new location of the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: squashed in http://patchwork.ozlabs.org/project/uboot/patch/ 20201105062407.1.I8091ad931cbbb5e3b6f6ababdf3f8d5db0d17bb9@changeid/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05Merge tag 'u-boot-imx-20201105' of ↵Tom Rini2-0/+257
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx for 2021.1 --------------------- - new boards : GE (new B1x5v2), phytec phyCORE-i.MX8MM - converted doc to reST - fixes for verdin-imx8mm (Toradex) - fixes for i.MX thermal driver - mx7ulp: Align the PLL_USB frequency - mx53: primary/secondary bmode Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/741465284
2020-11-05cros_ec: Support keyboard scanning with EC_CMD_GET_NEXT_EVENTAlper Nebi Yasak1-0/+11
The cros_ec_keyb driver currently uses EC_CMD_MKBP_STATE to scan the keyboard, but this host command was superseded by EC_CMD_GET_NEXT_EVENT and unavailable on more recent devices (including gru-kevin), as it was removed in cros-ec commit 87a071941b89 ("mkbp: Add support for buttons and switches.") dated 2016-07-06. The EC_CMD_GET_NEXT_EVENT has been available since cros-ec commit d1ed75815efe ("MKBP event signalling implementation") dated 2014-10-20, but it looks like it isn't included in firmware-* branches for at least link, nyan-big, samus, snow, spring, panther and peach-pit which have defconfigs in U-Boot. So this patch falls back to the old method if the EC doesn't recognize the newer command. The implementation is mostly adapted from Depthcharge commit f88af26b44fc ("cros_ec: Change keyboard scanning method."). On a gru-kevin, the current driver before this patch fails to read the pressed keys with: out: cmd=0x60: 03 9d 60 00 00 00 00 00 in-header: 03 fc 01 00 00 00 00 00 in-data: ec_command_inptr: len=-1, din=0000000000000000 check_for_keys: keyboard scan failed However the keyboard works fine with the newer command: out: cmd=0x67: 03 96 67 00 00 00 00 00 in-header: 03 ef 00 00 0e 00 00 00 in-data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ec_command_inptr: len=14, din=00000000f412df30 key_matrix_decode: num_keys = 0 0 valid keycodes found out: cmd=0x67: 03 96 67 00 00 00 00 00 in-header: 03 df 00 00 0e 00 00 00 in-data: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 ec_command_inptr: len=14, din=00000000f412df30 key_matrix_decode: num_keys = 1 valid=1, row=4, col=11 keycode=28 1 valid keycodes found {0d} Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05binman: Fix typo in kernel-doc format for binman_symname()Michal Simek1-1/+1
Fix typo. Fixes: 19790632648b ("binman: Support accessing binman tables at run time") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05sandbox: update function descriptions in os.hHeinrich Schuchardt1-93/+130
Use Sphinx style function descriptions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05sandbox: implement resetHeinrich Schuchardt1-0/+15
Up to now the sandbox would shutdown upon a cold reset request. Instead it should be reset. In our coding we use static variables like LIST_HEAD(efi_obj_list). A reset can occur at any time, e.g. via an UEFI binary calling the reset service. The only safe way to return to an initial state is to relaunch the U-Boot binary. The reset implementation uses execv() to relaunch U-Boot. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-05configs: meson64: relocate config_distro_bootcmmd headerJaehoon Chung1-1/+2
Relocate a config_distro_bootcmd header before defined CONFIG_EXTRA_ENV_SETTINGS. Otherwise it can't change to specific environment. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-05x86: acpi: Store the ACPI context in global_dataSimon Glass1-0/+13
At present we create the ACPI context but then drop it after generation of tables is complete. This is annoying because we have to then search for tables later. To fix this, allocate the context and store it in global_data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05Add an assembly guard around linux/bitops.hSimon Glass1-2/+2
This file can be included by any header but it includes C code. Guard it to avoid errors when compiling ASL, etc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05smbios: add parsing APIChristian Gmeiner1-0/+27
Add a very simple API to be able to access SMBIOS strings like vendor, model and bios version. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-01Merge tag 'efi-2020-01-rc2-2' of ↵Tom Rini4-16/+58
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc2 (2) The series contains the following enhancements * preparatory patches for UEFI capsule updates * initialization of the emulated RTC using an environment variable and a bug fix * If DisconnectController() is called for a child controller that is the only child of the driver, the driver must be disconnected.
2020-11-01board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2Sebastian Reichel1-0/+127
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor series (GE Bx50). It consists of a carrier PCB used in combination with a Congatec QMX6 SoM. This adds U-Boot support using device model everywhere and SPL for memory initialization. Proper configuration is provided as 'ge_b1x5v2_defconfig' and the combined image u-boot-with-spi.imx can be flashed directly to 1024 byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can be loaded separately via USB-OTG using e.g. imx_usb. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-01board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM supportTeresa Remmet1-0/+130
Add support PHYTEC phyCORE-i.MX8MM SOM. Supported features: - 2GB LPDDR4 RAM - 1x 1Gbit Ethernet - eMMC - external SD - debug UART3 - watchdog - i2c eeprom Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2020-10-31Merge tag 'u-boot-rockchip-20201031' of ↵Tom Rini2-0/+17
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - New PX30 board: Engicam PX30.Core; - Fix USB HID support for rock960; - Remove host endianness dependency for rockchip mkimage; - dts update for rk3288-tinker; - Enable console MUX for some ROCKPi boards; - Add config-based ddr selection for px30;
2020-10-30Merge tag 'dm-pull-30oct20' of ↵Tom Rini10-20/+112
https://gitlab.denx.de/u-boot/custodians/u-boot-dm of-platdata and dtoc improvements sandbox SPL tests binman support for compressed sections
2020-10-30log: typo logl_pref in documentationHeinrich Schuchardt1-1/+1
The name of structure element logl_prev is not matched by the documentation. %s/logl_pref/logl_prev/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30rockchip: Add Engicam PX30.Core EDIMM2.2 Starter KitJagan Teki1-0/+15
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam. PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30configs: meson64_android: don't show logo on ROM USB bootGuillaume La Roque1-4/+7
When booting from rom usb, skip the boot logo logic as it's possible that the partition containing the logo does not exist yet. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 19:39:21 +0300