summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2017-12-14arm: zynq: Fix SPL SD boot modeMichal Simek1-5/+2
This patch is fixing two issues: 1. Insufficient stack size for fat fs buffers 2. Insufficient space in malloc area Tested on zc702 and zc706. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14fpga: allow programming fpga from FIT image for all FPGA driversGoldschmidt Simon1-0/+1
This drops the limit that fpga is only loaded from FIT images for Xilinx. This is done by moving the 'partial' check from 'common/image.c' to 'drivers/fpga/xilinx.c' (the only driver supporting partial images yet) and supplies a weak default implementation in 'drivers/fpga/fpga.c'. Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (On zcu102) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-13SPL: Add FIT data-position property supportPeng Fan1-0/+3
For external data, FIT has a optional property "data-position" which can set the external data to a fixed offset to FIT beginning. Add the support for this property in SPL FIT. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tomas Melin <tomas.melin@vaisala.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: "Andrew F. Davis" <afd@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: "tomas.melin@vaisala.com" <tomas.melin@vaisala.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: York Sun <york.sun@nxp.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: "Cooper Jr., Franklin" <fcooper@ti.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Rick Altherr <raltherr@google.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13ARM: omap3_logic: Unlock NAND automatically in U-BootAdam Ford1-2/+0
The Micron Flash is locked by default. This will automaticlly unlock so manually unlocking is unnecessary in U-Boot. Signed-off-by: Adam Ford <aford173@gmail.com>
2017-12-13ata: Migrate CONFIG_MVSATA_IDE to KconfigTuomas Tynkkynen1-1/+0
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-13ata: Migrate CONFIG_LIBATA to KconfigTuomas Tynkkynen70-84/+0
This symbol enables some library code used by various SATA drivers, so make this a non-user-visible symbol select'ed by the respective drivers, and let moveconfig handle the rest. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-13ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen32-39/+0
And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_DWC_AHSATA to KconfigTuomas Tynkkynen16-16/+0
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_FSL_SATA to KconfigTuomas Tynkkynen18-19/+0
Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SATA_MV to KconfigTuomas Tynkkynen2-2/+0
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SATA_SIL3114 to KconfigTuomas Tynkkynen2-2/+0
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SATA_SIL to KconfigTuomas Tynkkynen3-3/+0
Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-11ARC: clk: introduce HSDK CGU clock driverEugeniy Paltsev1-0/+40
Synopsys HSDK clock controller generates and supplies clocks to various controllers and peripherals within the SoC. Each clock has assigned identifier and client device tree nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device tree sources. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-12-08Merge git://git.denx.de/u-boot-mpc85xxTom Rini2-0/+2
2017-12-08Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini16-886/+677
2017-12-07log: Plumb logging into the init sequenceSimon Glass1-0/+1
Set up logging both before and after relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07log: Add a test commandSimon Glass1-0/+3
Add a command which exercises the logging system. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07log: Add an implementation of loggingSimon Glass2-0/+247
Add the logging header file and implementation with some configuration options to control it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07Drop the log bufferSimon Glass3-52/+3
This does not appear to be used by any boards. Before introducing a new log system, remove this old one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07Move debug and logging support to a separate headerSimon Glass2-45/+60
Before adding new features, move these definitions to a separate header to avoid further cluttering common.h. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07Revert "sandbox: remove os_putc() and os_puts()"Simon Glass1-0/+20
While sandbox works OK without the special-case code, it does result in console output being stored in the pre-console buffer while sandbox starts up. If there is a crash or a problem then there is no indication of what is going on. For ease of debugging it seems better to revert this change. This reverts commit 47b98ad0f6779485d0f0c14f337c3eece273eb54. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07armv8: ls1088a: Add nand support for ls1088ardbAshish Kumar1-0/+2
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-07SECURE BOOT: Add fall back optionVinitha Pillai-B572234-23/+61
Add fall back option, to boot from NOR/QSPI/SD for LS1043, LS1046, LS1021 in case of distro boot failure. For LS1046, add kernel validation in case of secure boot in sd_bootcmd and qspi_bootcmd. For LS1043 and LS1021, add kernel validation in case of secure boot in sd_bootcmd, qspi_bootcmdand nor_bootcmd. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-07armv8: LS1088A_QSPI: SECURE_BOOT: Images validationUdit Agarwal3-16/+58
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment Add header address for PPA to be validated during ESBC phase for LS1088A platform based on LAyerscape Chasis 3. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-07armv8: ls1012a: Modify Kernel and Environment offsetBhaskar Upadhaya2-3/+3
Kernel is now located at 0x1000000 instead of 0xa00000 and envirorment variables are located at 3MB offset instead of 2MB in Flash. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-07driver: net: fsl-mc: flib changes for MC 10.3.0Yogesh Gaur7-844/+553
Existing MC driver framework is based on MC-9.x.x flib. This patch migrates MC obj (DPBP, DPNI, DPRC, DPMAC etc) to use latest MC flib which is MC-10.3.0. Changes introduced due to migration: 1. To get OBJ token, pair of create and open API replaces create APIs 2. Pair of close and destroy APIs replaces destroy APIs 3. For version read, get_version APIs replaces get_attributes APIs 4. dpni_get/reset_statistics APIs replaces dpni_get/set_counter APIs 5. Simplifies struct dpni_cfg and removes dpni_extended_cfg struct 6. Single API dpni_get_buffer_layout/set_buffer_layout replaces dpni_get_rx/set_rx, tx related, tx_conf_buffer_layout related APIs. New API takes a queue type as an argument. 7. Similarly dpni_get_queue/set_queue replaces dpni_get_rx_flow/set_rx_flow , tx_flow related, tx_conf related APIs Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-07powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalizationRan Wang1-0/+1
This issue is exposed after commit 9000eddbae0d ("drivers/usb/ehci: Use platform-specific accessors"), the wrong endianness of EHCI controller programing will cause USB function down. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-07powerpc/T104xRDB: Fix endian access issue on EHCI intinalizationRan Wang1-0/+1
This issue is exposed after commit 9000eddbae0d ("drivers/usb/ehci: Use platform-specific accessors"), the wrong endianness of EHCI controller programing will cause USB function down. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini5-48/+108
Patch queue for efi - 2017-12-05 Highlights for this release: - Dynamic EFI object creation (lists instead of static arrays) - EFI selftest improvements - Minor fixes
2017-12-04Merge git://git.denx.de/u-boot-uniphierTom Rini4-9/+7
2017-12-04omap3: evm: Explicitly use DISTRO_DEFAULTS features at startupDerald D. Woods1-27/+67
[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot [fallback 1] Check MMC 0:1 zImage and run mmcbootz [fallback 2] Check MMC 0:1 uImage and run mmcboot [fallback 3] Check NAND partitions and run nandboot If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is followed. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2017-12-04ARM: arch-meson: build memory banks using reported memory from registersNeil Armstrong1-1/+1
As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware and a secondary BL32 firmware. Since mid-2017, the reserved memory address of the BL31 firmware was moved and grown for security reasons. But mainline U-Boot and Linux has the old address and size fixed. These SoCs have a register interface to get the two firmware reserved memory start and sizes. This patch adds a dynamic reservation of the memory zones in the device tree bootmem reserved memory zone used by the kernel in early boot. To be complete, the memory zones are also added to the EFI reserved zones. Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2]. [1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html [2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html Changes since v1: - switched the #if to if(IS_ENABLED()) to compile all code paths - renamed function to meson_board_add_reserved_memory() - added a mem.h header with comment - updated all boards ft_board_setup() Changes since RFC v2: - reduced preprocessor load - kept Odroid-C2 static memory mapping as exception Changes since RFC v1: - switch to fdt rsv mem table and efi reserve memory - replaced in_le32 by readl() Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [trini: Fix warning on khadas-vim over missing <asm/arch/mem.h> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04arm: Add Khadas VIM support based on Meson GXL familyNeil Armstrong1-0/+21
This adds platform code for the Khadas VIM board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04arm: Add LibreTech CC support based on Meson GXL familyNeil Armstrong1-0/+21
This adds platform code for the Libre Computer CC "Le Potato" board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04add support for Raspberry Pi Zero WDmitry Korunov1-1/+1
Signed-off-by: Dmitry Korunov <dessel.k@gmail.com>
2017-12-04test: compression: Convert to unit test frameworkSimon Glass2-0/+18
Adjust this test to use the unit test framework. Drop the two existing commands for running the tests and replace them with a single 'ut compression' command, with sub-commands. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Continue to have ret = run_test_internal(...) in run_test so ret is always initialized] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04mtd: nand: include <asm/cache.h> from include/linux/mtd/rawnand.hMasahiro Yamada1-0/+1
This is needed for ARCH_DMA_MINALIGN. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: Rename nand.h into rawnand.hMasahiro Yamada4-9/+6
This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon <boris.brezillon@free-electrons.com> Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-03test: Add a command function for test executionSimon Glass1-0/+16
The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-01efi_loader: helper function to add EFI object to listHeinrich Schuchardt1-0/+2
To avoid duplicate coding provide a helper function that initializes an EFI object and adds it to the EFI object list. efi_exit() is the only place where we dereference a handle to obtain a protocol interface. Add a comment to the function. Suggested-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: manage protocols in a linked listHeinrich Schuchardt1-2/+4
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: efi_console: use helper functionsHeinrich Schuchardt1-10/+2
Use helper functions efi_created_handle and efi_add_protocol for creating the console handles and instaling the respective protocols. This change is needed if we want to move from an array of protocols to a linked list of protocols. Eliminate EFI_PROTOCOL_OBJECT which is not used anymore. Currently we have not defined protocol interfaces to be const. So efi_con_out and efi_console_control cannot be defined as const. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: helper functions for protocol managementHeinrich Schuchardt1-0/+12
This patch provides helper functions to manage protocols. efi_search_protocol - find a protocol on a handle efi_add_protocol - install a protocol on a handle efi_remove_protocol - remove a protocol from a handle efi_remove_all_protocols - remove all protocols from a handle Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: efi_gop: use correct types for parametersHeinrich Schuchardt1-5/+5
Use efi_uintn_t instead of unsigned long. EFI_GRAPHICS_OUTPUT_BLT_OPERATION is an enum. If we don't define an enum we have to pass it as u32. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: argument of efi_search_obj should be constHeinrich Schuchardt1-1/+1
The argument of efi_search_obj is not changed so it should be marked as const. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: make efi_create_handle non-staticHeinrich Schuchardt1-0/+2
Export function efi_create_handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: efi_dp_match should have const argumentsHeinrich Schuchardt1-1/+2
efi_dp_match does not change its arguments. So they should be marked as const. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: rework efi_search_objHeinrich Schuchardt1-0/+2
EFI_HANDLEs are used both in boottime and in runtime services. efi_search_obj is a function that can be used to validate handles. So let's make it accessible via efi_loader.h. We can simplify the coding using list_for_each_entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: consistently use efi_uintn_t in boot servicesHeinrich Schuchardt2-19/+22
Consistenly use efi_uintn_t wherever the UEFI spec uses UINTN in boot services interfaces. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: replace UINTN by efi_uintn_tHeinrich Schuchardt2-6/+6
UINTN is used in the UEFI specification for unsigned integers matching the bitness of the CPU. Types in U-Boot should be lower case. The patch replaces it by efi_uintn_t. Suggested-by: Simon Glass <sjg@chromium.org> Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-18 22:25:02 +0300