summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-08-13Merge branch '2019-08-11-ti-imports'Tom Rini7-3/+170
- More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
2019-08-12ARM: da850-evm: Increase environment NOR partition offsetAdam Ford1-1/+1
The current size allocated to U-Boot is 384k, but U-Boot has grown to 436K which means that saving the environmental variables wipes out part of the U-Boot source and the board ceases to function. Due to the sector and erase size for the NOR part and a desire to not have to change partition sizes often, this patch moves the U-Boot environmental variables to an offset of 1M so saveenv does not brick the board. This patch also sets up MTDIDS and MTDPARTS to clearly show where U-Boot and U-Boot's environmental variables are located. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12ARM: da850-evm: Fix Lowlevel initAdam Ford1-1/+1
A previous patch for enabling the NAND config set a flag called CONFIG_SKIP_LOWLEVEL_INIT when it should have been called CONFIG_SKIP_LOWLEVEL_INIT_ONLY. The affect this had was creating a delay on startup for the NOR version which is XIP and doesn't have SPL, so the lowlevel initialization functions need to operate. This delay was not really noticeable at first, but the delays have been getting longer, finally reached the point of nearly seven seconds before the board would appear to start. This patch sets the CONFIG_SKIP_LOWLEVEL_INIT_ONLY instead which means "The normal CP15 init (such as enabling the instruction cache) is still performed" per the README. It doesn't appear to have any adverse behavior on the SPI Flash or the NAND flash boards which use SPL. Fixes: 93f3362762f0 ("ARM: configs: Add da850evm_nand to boot from NAND") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12arm: dts: k3-am65: add support for PCIe and SERDESSekhar Nori1-0/+13
Add needed device-tree nodes to support PCIe 0 and SERDES on AM65x SoC. The nodes are kept disabled by default. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12dm: core: add support for getting register address and sizeSekhar Nori2-0/+59
Current dev_read_*() API lacks support to get address and size of a "reg" property by name or index. Add support for the same. Livetree support has been added but not tested on real hardware. The existing unit tests testing reading address from device-tree have been updated to test address as well as size. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12clk: add support for clk_is_match()Sekhar Nori1-0/+12
Add support for clk_is_match() which is required to know if two clock pointers point to the same exact physical clock. Also add a unit test for the new API. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12board/BuR/brsmarc1: initial commitHannes Schmelzer1-0/+83
This commit adds support for the B&R brsmarc1 SoM. The SoM is based on TI's AM335x SoC. Mainly vxWorks 6.9.4.x is running on the board, doing some PLC stuff on various carrier boards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-12watchdog: omap_wdt: Disable DM watchdog support in SPLSuniel Mahesh1-1/+1
This patch disables DM watchdog support for SPL builds and uses the legacy omap watchdog driver on TI AM335x chipsets. The following build error is reported if DM watchdog support was enabled in SPL: CC spl/drivers/usb/gadget/rndis.o LD spl/drivers/usb/gadget/built-in.o LD spl/drivers/usb/musb-new/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 440 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Adjusted WATCHDOG_RESET macro accordingly. Earlier it was pointing to hw_watchdog_reset. Since CONFIG_WATCHDOG replaces CONFIG_HW_WATCHDOG, now WATCHDOG_RESET macro points to watchdog_reset. This watchdog_reset is not defined anywhere for am33xx/omap2 and needs to be defined. Fixed this by simply calling hw_watchdog_reset in watchdog_reset. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx/omap2 based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> [trini: Fix watchdog.h logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12common: Add a note about the effort to reduce common.hSimon Glass1-0/+6
This file has quite a lot of general definitions and include files. Add a note about our intent to remove more of this. The file should ultimately include the configuration and perhaps a very other very common things used by most U-Boot files. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-12Drop PCMCIASimon Glass3-295/+0
This is no-longer used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-12env: Rename environment.h to env_internal.hSimon Glass2-4/+12
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Move TOTAL_MALLOC_LEN to environment.hSimon Glass2-10/+14
This declaration is only used in three files. Although it relates to malloc() it is actually only used during malloc() init. It uses CONFIG options including CONFIG_ENV_ADDR which are defined only in environment.h so this header must be included anyway, for TOTAL_MALLOC_LEN to be correct. Nove it to environment.h to simplify the common file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11env: Drop the double underscores in search.hSimon Glass1-28/+24
There doesn't seem to be any good reason for using __ in the arguments in this header file. A double underscore is usually reserved for compiler features. Drop these and remove the unnecessary 'extern' as well. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Drop the ACTION typedefSimon Glass1-8/+8
Avoid using a typedef here which is unnecessary. Add an 'env_' prefix to both the enum and its members to make it clear that these are related to the environment. Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Rename the redundancy flagsSimon Glass2-4/+7
Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Drop _ENTRYSimon Glass1-4/+1
This typedef does not need to be defined in the search.h header since it is only used in one file (hashtable.c). Remove it from the header and change it to a struct. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Drop the ENTRY typedefSimon Glass3-13/+16
U-Boot is not supposed to use typedef for structs anymore. Also this name is the same as the ENTRY() macro used in assembler files, and 'entry' itself is widely used in U-Boot (>8k matches). Drop the typedef and rename the struct to env_entry to reduce confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move callback definitions to env.hSimon Glass3-29/+34
These definitions are effectively part of the 'public' API of the environment implementation since they do not require access to any internal variables. Move them to the env.h header. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_valid to env.hSimon Glass2-8/+8
This enum is somewhat widely used to determine if the environment is valid or not. Move it to the common environment header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Rename environment to embedded_environmentSimon Glass2-2/+2
The name 'environment' is widely used in U-Boot so is not a very useful name of a variable. Rename it to better indicate its purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11env: Move env_reloc() to env.hSimon Glass2-4/+7
Move env_reloc() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get_char() to env.hSimon Glass2-10/+10
Move env_get_char() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move get/set_default_env() to env.hSimon Glass2-6/+11
Move these functions to the new header file and rename set_default_env() to env_set_default() so that it has a consistent env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Drop env_crc_update()Simon Glass1-3/+0
This function is not defined or used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env import/export functions to env.hSimon Glass2-12/+38
Move these functions to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_load/save functions to env.hSimon Glass2-21/+21
Move these function to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move set_default_vars to env.hSimon Glass2-3/+11
Move this function to the new header file and rename it so it has an env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_fix_drivers() to env.hSimon Glass2-5/+5
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: net: Move eth_parse_enetaddr() to net.c/hSimon Glass2-2/+11
This function fits better with the network subsystem, so move it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move eth_env_get/set_enetaddr() to env.hSimon Glass2-2/+18
Move these two functions over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get() to env.hSimon Glass2-12/+12
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass7-12/+17
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get_hex() to env.hSimon Glass2-12/+12
Move env_get_hex() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_yesno() to env.hSimon Glass2-6/+8
Move env_get_yesno() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_ulong() to env.hSimon Glass2-13/+13
Move env_get_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass3-9/+10
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_hex() to env.hSimon Glass2-21/+22
Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move envmatch() to env.hSimon Glass2-3/+11
Move envmatch() over to the new header file. Also rename it to env_match() to better line up with other functions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_relocate() to env.hSimon Glass2-1/+8
Move env_relocate() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_init() to env.hSimon Glass2-1/+10
Move env_init() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass2-12/+12
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move get_env_id() to env.hSimon Glass2-2/+10
Move this function over to the new header file. Also rename it to have an env_ prefix like the other functions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Create a new file for environment functionsSimon Glass2-4/+28
At present we have environment.h but this file includes all the environment-related header files as well as internals such as default_environment. It seems desirable to have a new header to hold the commonly used environment functions, so that most files can avoid including all of this unnecessary stuff. Create a new env.h header and move one function over to it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11common: Remove video_setmem()Simon Glass1-3/+0
This function is no-longer defined in U-Boot. Drop the declaration from common.h Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11common: Move lcd_setmem() to lcd.hSimon Glass2-3/+1
This function relates to lcd.h and is about to become obsolete with the driver-model conversion. Move it out of common.h Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11common: Drop the dpram_... functionsSimon Glass1-5/+0
These declarations are not used anymore, so drop them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11common: Move gzip functions into a new gzip headerSimon Glass2-52/+103
As part of the effort to remove things from common.h, create a new header for the gzip functions. Move the function declarations to it and add missing documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11board: hisilicon: Add support for Hikey960 boardManivannan Sadhasivam1-0/+60
This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC. More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/ The initial supported/tested devices include: - Debug serial - SD With these support, it's good enough for loading Linux Kernel from SD. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11arm: dts: Import HI3660 devicetree from LinuxManivannan Sadhasivam1-0/+214
This commit imports HI3660 SoC devicetree from Linux Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini3-0/+135
- R8A77980 V3H support
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-12 05:02:18 +0300