summaryrefslogtreecommitdiff
path: root/scripts/config_whitelist.txt
AgeCommit message (Collapse)AuthorFilesLines
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini1-2/+0
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06Kconfig: Remove CONFIG_SYS_SRAM_STARTOvidiu Panait1-1/+0
Remove ad-hoc CONFIG_SYS_SRAM_START and use CONFIG_SYS_SRAM_BASE instead. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_SIZE to KconfigOvidiu Panait1-1/+0
This converts ad-hoc CONFIG_SYS_SRAM_SIZE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_BASE to KconfigOvidiu Panait1-1/+0
This converts ad-hoc CONFIG_SYS_SRAM_BASE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-07-28configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigsPeng Fan1-1/+0
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28configs: Remove dead CONFIG optionsAdam Ford1-1/+0
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford1-2/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford1-2/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-69/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini1-1/+0
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Move eSDHC adapter card identification to board filesYangbo Lu1-1/+0
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25net: dc2114x: Add Kconfig entriesMarek Vasut1-1/+0
Add Kconfig entries for the dc2114x driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-18mips: octeon: Initial minimal support for the Marvell Octeon SoCAaron Williams1-1/+0
This patch adds very basic support for the Octeon III SoCs. Only CFI parallel NOR flash and UART is supported for now. Please note that the basic Octeon port does not include the DDR3/4 initialization yet. This will be added in some follow-up patches later. To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such boards. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-17arm64: Remove CONFIG_SYS_FULL_VA macroMichal Simek1-1/+0
All configurations have been removed in 2016 by commit 7985cdf74b28 ("arm64: Remove non-full-va map code"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-07-17Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to KconfigPatrick Delaunay1-1/+0
This converts the following to Kconfig: CONFIG_ARMV7_PSCI_1_0 CONFIG_ARMV7_PSCI_0_2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-13ARM: da850-evm: Unify config options with KconfigAdam Ford1-2/+0
There are two options that are currently whitelisted, but they are redundant, because there are not necessary since Kconfig options exist to basically state the same thing. CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and only used by the da850 when booting from NOR, however the only time CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since NOR doesn't need SPL, the options for SPL can be moved to a check for building SPL instead of checking for NOR. This patch removes the checks for these two config options and unifies the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH. Since this board is the only board that uses these two config options, they can be removed from the whitelist table. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-12Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini1-2/+0
- Enable DM_SPI on siemens omap boards (Jagan) - Dropped some non-dm supported omap3 boards (Jagan) - Dropped non-dm code in omap3 spi driver (Jagan) - Dropped non-dm code in kirkwood spi driver (Bhargav)
2020-07-10powerpc: move ADDR_MAP to KconfigMarek Szyprowski1-2/+0
Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-10spi: kirkwood: Drop nondm codeBhargav Shah1-1/+0
Drop the nondm code from kirkwood_spi.c since there is no board or any other code using for it. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: Remove overo boardJagan Teki1-1/+0
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Ash Charles <ash@gumstix.com> Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09linux/kconfig.h: remove unused helper macrosRasmus Villemoes1-2/+0
U-Boot does not have loadable modules, and nothing currently uses any of the (CONFIG_)?IS_(BUILTIN|MODULE) macros - only the (CONFIG_)?IS_ENABLED variants are ever used. While I understand the desire to keep this somewhat synchronized with linux, we've already departed by the introduction of the CONFIG_IS_ENABLED extra logic, and deleting these makes the next patch much simpler, since I won't have to duplicate a lot of logic for no real gain (as there are no users). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2020-06-30kconfig: mmc: move pxa_mmc_generic to kconfigMarcel Ziswiler1-1/+0
Move CONFIG_PXA_MMC_GENERIC to Kconfig. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini1-17/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24spi: zynq_[q]spi: Convert config's to macro'sAshok Reddy Soma1-3/+0
Remove below config options and convert them to macros. They have never been configured to different values than default one. And also it makes sense to reduce the config_whitelist. CONFIG_SYS_ZYNQ_SPI_WAIT CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_XILINX_SPI_IDLE_VAL Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-23configs: Resync with savedefconfigTom Rini1-14/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-21Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini1-2/+0
into next - Convert pcnet and eepro100 ethernet drivers to DM
2020-06-18net: eepro100: Add Kconfig entriesMarek Vasut1-1/+0
Add Kconfig entries for the eepro100 driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Remove EEPRO100_SROM_WRITEMarek Vasut1-1/+0
This code is never enabled, last board that used it was ELPPC which was removed some 5 years ago, so just remove this code altogether. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-11spi: atmel: Drop CONFIG_SYS_SPI_WRITE_TOUTJagan Teki1-1/+0
Drop CONFIG_SYS_SPI_WRITE_TOUT there is no code usage. Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04serial: Convert ARM_DCC to KconfigTom Rini1-1/+0
The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-05-26configs: Resync with savedefconfigTom Rini1-3/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25cmd: zip: automatically pull in gzip()Michael Walle1-2/+0
Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu item. It is not selectable by a user because there is no reason to do so. Instead it will be automatically selected by the stuff which uses gzip(), like the zip command. Remove it from the config_whitelist.txt. Also remove CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The default seems to be sane, otherwise it should be added as a Kconfig option. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25env: Convert ENV_ACCESS_IGNORE_FORCE to KconfigMarek Vasut1-1/+0
Convert ENV_ACCESS_IGNORE_FORCE to Kconfig, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-05-22net: ks8851: Add Kconfig entriesMarek Vasut1-2/+0
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher1-1/+0
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-16env: Convert CONFIG_DELAY_ENVIRONMENT to KconfigOvidiu Panait1-1/+0
This converts ad-hoc CONFIG_DELAY_ENVIRONMENT to Kconfig. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15configs: Resync with savedefconfigTom Rini1-5/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-10spi: Zap lpc32xx_ssp driver-related codeJagan Teki1-1/+0
lpc32xx_ssp driver is deprecated, no active updates and no board user, hence dropped the same. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.aribaud@3adev.fr> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-08treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma1-2/+0
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-08cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mappingMichal Simek1-1/+0
There is no real need to exactly define space for saving patterns for alternate memory test. It is much easier to allocate space on the stack and use it instead of trying to find out space where pattern should be saved. For example if you want to test the whole DDR memory you can't save patter to DDR and you need to find it out. On Xilinx devices DDR or OCM addresses were chosen but that means that OCM needs to be mapped and U-Boot has access permission there. It is easier to remove this limitation and simply save it on stack because it is very clear that memory test can't rewrite U-Boot and U-Boot has also full access to memory where runs from. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-05-08configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigsPatrick Delaunay1-1/+0
Move CONFIG_SYS_MTDPARTS_RUNTIME into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-08configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigsPatrick Delaunay1-1/+0
Move CONFIG_SET_DFU_ALT_INFO into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-05-04Merge branch 'next' of git://git.denx.de/u-boot-shTom Rini1-5/+0
This is part 1 of big network cleanup / DM conversion. The dc2114x/rtl8139/pcnet/tulip PCI adapter drivers received checkpatch cleanups in preparation for DM conversion. The smc911x is converted to DM completely. The dwc_eth_qos cache fixes are applied.
2020-05-01configs: migrate CONFIG_SYS_ARM_CACHE_* in KconfigPatrick Delaunay1-1/+0
Move CONFIG_SYS_ARM_CACHE_WRITETHROUGH and CONFIG_SYS_ARM_CACHE_WRITEALLOC into Kconfig done by moveconfig.py. Kconfig uses a choice between the 3 values supported in U-Boot, including the new configuration CONFIG_SYS_ARM_CACHE_WRITEBACK (the default configuration). The patch also avoids to select simultaneously 2 configurations. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01net: tulip: Remove CONFIG_TULIP_*Marek Vasut1-3/+0
These macros are not used by any board, remove them to simplify the driver. The EEPROM accessors are still retained however, as those might still be useful. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01net: pcnet: Remove CONFIG_PCNET_79C97xMarek Vasut1-2/+0
These macros guard one switch-case statement, which grows mips malta by some 20 bytes if debug is enabled, and even less if it is not. To make the code simpler, just support all the NICs and be done with it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-21 10:33:17 +0300