summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2022-01-21Convert CONFIG_TIMESTAMP to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_TIMESTAMP Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21Convert CONFIG_UDP_CHECKSUM to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_UDP_CHECKSUM Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-20Merge tag 'doc-2022-04-rc1' of ↵Tom Rini5-12/+12
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request doc-2022-04-rc1 Replace @return by Return: in code comments.
2022-01-19doc: replace @return by Return:Heinrich Schuchardt5-12/+12
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19Merge tag 'xilinx-for-v2022.04-rc1' of ↵Tom Rini1-1/+0
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc1 gpio: - Add modepin driver net: - Save random mac addresses to eth variable zynqmp gem: - Add support for mdio bus DT description - Add support for reset and SGMII phy configuration - Reduce timeout for MDIO accesses zynqmp clk: - Fix clock handling for gem and usb phy: - Add zynqmp phy/serdes driver serial: - Add one missing compatible string microblaze: - Symbol alignement - SPL fixups - Code cleanups zynqmp: - Various dt changes, DP pre-reloc, gem resets, gem clocks - Switch SOM to shared psu configuration - Move dcache handling to firmware driver - Workaround gmii2rgmii DT description issue - Enable broadcasts again - Change firmware enablement logic - Small adjustement in firmware driver versal: - Support new mmc@ DT nodes - Fix run time variable handling - Add missing I2C_PMC ID for power domain
2022-01-14checkpatch: report ERROR only on disabling of fdt and initrd relocationHou Zhiqiang1-1/+1
Let the check pass when patches have these patterns in their context. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2022-01-05microblaze: migrate CONFIG_SYS_USR_EXCEP to KconfigOvidiu Panait1-1/+0
Migrate CONFIG_SYS_USR_EXCEP to Kconfig. Also, rename it to XILINX_MICROBLAZE0_USR_EXCEP in order to match the naming convention of microblaze-generic Kconfig options. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-7-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-12-28Merge tag 'video-next-20211228' of ↵Tom Rini3-1/+40
https://source.denx.de/u-boot/custodians/u-boot-video into next - various fixes to the sandbox display support - support for showing a logo without splash screen config - support for BMP drawing to depths other than 16bpp - tests for the different types of supported BMP images - support showing a logo when running coreboot via qemu
2021-12-28configs: Resync with savedefconfigTom Rini1-11/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_JFFS2_DEV et al to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND CONFIG_JFFS2_PART_OFFSET CONFIG_JFFS2_PART_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_KIRKWOOD_GPIO to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_KIRKWOOD_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_SYS_KWD_CONFIG to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_KWD_CONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_88F5182 et al to KconfigTom Rini1-17/+0
This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Kconfig: Remove some symbols from the whitelistTom Rini1-897/+0
There are a number of symbols that are never defined, only referenced in code imported from the Linux kernel or similar. Drop them from the list. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_CPU_SH7751 to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_CPU_SH7751 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_CPU_PXA27X to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_CPU_PXA27X Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_83XX_PCICLK to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_83XX_PCICLK Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-28Convert CONFIG_TEGRA_NAND to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_TEGRA_NAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SD_BOOT et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SD_BOOT CONFIG_SD_BOOT_QSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27x86: coreboot: Add a sample script to build a qemu imageSimon Glass1-0/+19
It is useful to boot coreboot (with U-Boot as a payload) from qemu. Add a sample script to show how to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-27video: Support showing the U-Boot logoSimon Glass1-0/+21
Show the U-Boot logo by default. This is only 7KB in size so seems like a useful default for boards that enable a display. If SPLASH_SCREEN is enabled, it is not enabled by default, so as not to conflict with that feature. Also disable it for tests, since we don't want to complicate the output. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-27video: Convert CONFIG_VIDEO_LOGO to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_VIDEO_LOGO Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is deprecated. The only relevant code is now in splash.c Drop the check for DM_VIDEO in that file. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23fdt: Makefile: Ensure that OF_BOARD is used when neededSimon Glass2-0/+43
Boards which define OF_HAS_PRIOR_STAGE must define OF_BOARD at present, since a custom function is the only way to obtain the devicetree at runtime. Add a build error when this requirement is not met, to avoid accepting any patches which break this requirement. Add an allowlist for boards which use it, currently none. This allowlist can be updated for local development, if needed. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: change of_whitelist to of_allowlist] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-23fdt: Make it easier to debug u-boot.dtsi filesSimon Glass1-1/+3
At present one must hack the Makefile to see what is going on with these files. Also it doesn't quite work correctly. Fix this by using an environment variable for debugging. Update the docs also. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17Convert CONFIG_PHYSMEM to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_PHYSMEM Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Sean Anderson <seanga2@gmail.com>
2021-12-05ide: Drop unused CONFIG optionsSimon Glass1-2/+0
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use ATA_PORT_ADDR() locally instead. Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also unused. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05Convert CONFIG_KEYBOARD to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_KEYBOARD Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05Convert CONFIG_SYS_FDT_LOAD_ADDR to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_SYS_FDT_LOAD_ADDR Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05sandbox: Drop CONFIG_HOST_MAX_DEVICESSimon Glass1-1/+0
This can go in the related header file. Drop the CONFIG option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-01scripts: remove CONFIG_IS_ENABLED and CONFIG_VAL in config_whitelist.txtPatrick Delaunay1-2/+0
The helper macro CONFIG_IS_ENABLED and CONFIG_VAL are not real configurations and they are no more present in u-boot.cfg so they can be removed in config_whitelist.txt. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Simon Glass <sjg@chromium.org>
2021-12-01scripts: remove CONFIG_IS_ENABLED and CONFIG_VAL in generated u_boot.cfgPatrick Delaunay1-1/+2
The two helpers macros CONFIG_IS_ENABLED and CONFIG_VAL are defined in include/linux/kconfig.h but they are not real configurations; they can be safely removed in the generated configuration file "u-boot.cfg". This patch simplifies the comparison of this U-Boot configuration file. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Simon Glass <sjg@chromium.org>
2021-12-01Merge branch '2021-12-01-Kconfig-migrations' into nextTom Rini1-2/+0
- Finish converting CONFIG_USE_BOOTCOMMAND, CONFIG_BOOTCOMMAND, CONFIG_RAMBOOTCOMMAND, CONFIG_NFSBOOTCOMMAND, all of CONFIG_SYS_[BO]R[0-7]_PRELIM, CONFIG_FSL_DDR_BIST and CONFIG_FSL_DDR_INTERACTIVE.
2021-11-30Convert CONFIG_LCD_DT_SIMPLEFB to KconfigPatrick Delaunay1-1/+0
This converts the following to Kconfig: CONFIG_LCD_DT_SIMPLEFB This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-29Merge tag 'v2022.01-rc3' into nextTom Rini2-6/+361
Prepare v2022.01-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-29env: Avoid using GNU features in awkSimon Glass1-9/+20
GNU has a very useful third argument to match() but this is not supported in the POSIX awk. Update the code to cope, so that the script is POSIX-compliant. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
2021-11-20scripts: update spelling.txt from upstream LinuxHeinrich Schuchardt1-5/+360
This list is used by checkpatch.pl. The Linux v5.15 version has several words that where mispelled in U-Boot too. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-16env: Allow U-Boot scripts to be placed in a .env fileSimon Glass1-0/+80
At present U-Boot environment variables, and thus scripts, are defined by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text to this file and dealing with quoting and newlines is harder than it should be. It would be better if we could just type the script into a text file and have it included by U-Boot. Add a feature that brings in a .env file associated with the board config, if present. To use it, create a file in a board/<vendor> directory, typically called <board>.env and controlled by the CONFIG_ENV_SOURCE_FILE option. The environment variables should be of the form "var=value". Values can extend to multiple lines. See the README under 'Environment Variables:' for more information and an example. In many cases environment variables need access to the U-Boot CONFIG variables to select different options. Enable this so that the environment scripts can be as useful as the ones currently in the board config files. This uses the C preprocessor, means that comments can be included in the environment using /* ... */ Also support += to allow variables to be appended to. This is needed when using the preprocessor. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-11-15makefile: add missing semicolonsAngelo Dureghello1-1/+1
On some distributions, as Debian GNU 11, this targets fails with errors. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
2021-11-13configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Remove CONFIG_SERIAL_MULTITom Rini1-1/+0
This symbol has been functionally dead for a long time. Remove the last and recent re-introductions of setting it, and update the whitelist so it will not be re-introduced again. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Remove LYNX KDI remaindersThomas Huth1-1/+0
The last board that used to set CONFIG_LYNXKDI has been removed in commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"), doc/README.lynxkdi only talks about a MPC8260 board being supported, and the mpc8260 support has been removed four years ago in commit 2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already, and common/lynxkdi.c only consists of an "#error" statement these days, so it seems like the LYNX KDI code is dead code nowadays. Let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-12Create a new boot/ directorySimon Glass1-2/+2
Quite a lot of the code in common/relates to booting and images. Before adding more it seems like a good time to move the code into its own directory. Most files with 'boot' or 'image' in them are moved, except: - autoboot.c which relates to U-Boot automatically running a script - bootstage.c which relates to U-Boot timing Drop the removal of boot* files from the output directory, since this interfers with the symlinks created by tools and there does not appear to be any such file from my brief testing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-09configs: fsl: migrate FMAN/QE specific defines to KconfigRajesh Bhagat1-3/+0
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-07efi: Add a script to build an image for testing on UEFISimon Glass1-0/+193
It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-05configs: Resync with savedefconfigTom Rini1-3/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas1-1/+1
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini1-1/+1
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21arm: mvebu: a3720: Create Kconfig option for I2C_MVMarek Behún1-1/+0
Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21efi_loader: Fix link of EFI apps with ld.lldAlistair Delva1-1/+1
When compiling U-Boot with ld.lld as the linker, the helloworld EFI app example fails to link: LD lib/efi_loader/helloworld_efi.so ld.lld: error: section: .dynamic is not contiguous with other relro sections LLD will always create RELRO program header regardless of target emulation, whereas BFD may automatically disable it for unsupported targets. Add -znorelro to disable it explicitly in all cases. Signed-off-by: Alistair Delva <adelva@google.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 15:39:49 +0300