Age | Commit message (Collapse) | Author | Files | Lines |
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This method has the same name as its class which is confusing. It is also
annoying when searching the code.
It builds a string with a colour, so rename it to build().
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rename this function so that when we convert it to snake case it will not
conflict with the built-in print() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a -a option to specify changes to the config before the build
commences. For example
buildman -a ~CONFIG_CMDLINE
disables CONFIG_CMDLINE before doing the build.
This makes it easier to try things out as well as to write tests without
creating a new board or manually manging the .config file.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
If a thread crashes it is helpful to try the operation again with
threading disabled. Add a hint about that.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.
It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use test_util to run the tests, with the ability to select a single test
to run, if desired.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the full horror of the Python traceback is shown by default. It
is normally only useful for debugging. Turn it off by default and add a
--debug flag to enable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Reverse the order of the return tuple, so that the filename is first.
This seems more obvious than putting the temporary directory first.
Correct a bug that leaves a space on the final line.
Allow the caller to control the name of the temporary directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function is handy for binman as well. Move it into the shared 'tools'
module.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add some empty __init__ files for binman, buildman and dtoc so that
pylint is able to recognise these as Python modules and produce more
useful pylint output.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
While CI has been using gcc-11.1.0 for a long time, we have not updated
buildman to match. Correct this omission.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Hex and int Kconfig options are supposed to have defaults. This is so we
can configure U-Boot without having to enter particular values for the
items that don't have specific values in the board's defconfig file.
If this rule is not followed, then introducing a new Kconfig can produce
a loop like this:
Break things (BREAK_ME) [] (NEW)
Error in reading or end of file.
Break things (BREAK_ME) [] (NEW)
Error in reading or end of file.
The continues forever since buildman passes /dev/null to 'conf', and
the build system just tries again. Eventually there is so much output that
buildman runs out of memory.
We can detect this situation by looking for a symbol (like 'BREAK_ME')
which has no default (the '[]' above) and is marked as new. If this
appears multiple times in the output, we know something is wrong.
Add a filter function for the output which detects this situation. Allow
it to return True to terminate the process. Implement this termination in
cros_subprocess.
With this we get a nice message:
buildman --board sandbox -T0
Building current source for 1 boards (0 threads, 32 jobs per thread)
sandbox: w+ sandbox
+.config:66:warning: symbol value '' invalid for BREAK_ME
+
+Error in reading or end of file.
+make[3]: *** [scripts/kconfig/Makefile:75: syncconfig] Terminated
+make[2]: *** [Makefile:569: syncconfig] Terminated
+make: *** [Makefile:177: sub-make] Terminated
+(** did you define an int/hex Kconfig with no default? **)
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present buildman does not write any output (to the 'out' and 'err)
files if the build terminates with a fatal error. This is to avoid adding
lots of spam to the logs.
However there are times when this is actually useful, such as when the
build fails for an obscure reason such as a Kconfig loop.
Update the logic to always write the output, so that the user gets a clue
as to what is happening.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Collect the code for printing the full help message of patman, buildman
and binman into a single function in patman.tools.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
|
|
Rename this option so that CONFIG_IS_ENABLED can be used with it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rename these options so that CONFIG_IS_ENABLED can be used with them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Fixup some incorrect renames]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Rename this option so that CONFIG_IS_ENABLED can be used with it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present we sometimes see problems in gitlab where the environment has
0x80 characters or sequences which are not valid UTF-8.
Avoid this by using bytes for the environment, both internal to buildman
and when writing out the 'env' file. Add a test to make sure this works
as expected.
Reported-by: Marek Vasut <marex@denx.de>
Fixes: e5fc79ea718 ("buildman: Write the environment out to an 'env' file")
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There have been at least a few cases where an exception has occurred in a
thread and resulted in buildman hanging: running out of disk space and
getting a unicode error.
Handle these by collecting a list of exceptions, printing them out and
reporting failure if any are found. Add a test for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the code to report a build result is duplicated. Put it in a
common function to avoid this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add some function comments which are missing, or missing arguments.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The environment may contain some unicode characters. At least that is what
seemed to happen on one commit:
Building current source for 1 boards (0 threads, 64 jobs per thread)
0 0 0 /1 -1 (starting)
Traceback (most recent call last):
File ".../tools/buildman/buildman", line 64, in <module>
ret_code = control.DoBuildman(options, args)
File "tools/buildman/control.py", line 372, in DoBuildman
options.keep_outputs, options.verbose)
File ".../tools/buildman/builder.py", line 1704, in BuildBoards
results = self._single_builder.RunJob(job)
File ".../tools/buildman/builderthread.py", line 526, in RunJob
self._WriteResult(result, job.keep_outputs, job.work_in_output)
File ".../tools//buildman/builderthread.py", line 349, in _WriteResult
print('%s="%s"' % (var, env[var]), file=fd)
UnicodeEncodeError: 'ascii' codec can't encode characters in position
311-312: ordinal not in range(128)
The problem defies repetition with any change at all to buildman. But
let's set an encoding in any case.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present even if only a single thread is in use, buildman still uses
threading.
For some debugging it is helpful to do everything in the main process.
Allow -T0 to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The isAlive() method was deprecated in Python 3.8 and has been removed in
Python 3.9. See https://bugs.python.org/issue37804. Use is_alive() instead.
Since Python 2.6 is_alive() has been a synonym for isAlive(). So there
should be no problems for users using elder Python 3 versions.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Buildman reuses build directories from previous builds to avoid the cost
of 'make mrproper' for every build. If the previous build produced an SPL
image but the current one does not, the SPL image will remain and buildman
will think it is a result of building the current board.
Remove these files before building, to avoid this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rename these functions to lower case as per PEP8.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This patch makes buildman create linked working trees instead of clones
of the source repository, but keeps updating the older clones of the
repository that might already exist. These worktrees share "everything
except working directory specific files such as HEAD, index, etc." with
the source repository. See the git-worktree(1) manual page for more
information.
If git-worktree isn't available, silently falls back to cloning the
repository.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
|
|
There are few places where the path of the current modules is calculated
but not used. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is interesting to note the number of builds completed per second to
track machine performance and build speed. Add a 'rate' value at the end
of the build to show this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This current fails with an error. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 7664b03ffc5 ("buildman: Remove _of_#_ from results directory paths")
|
|
Older versions of this script don't support the -q flag. Since buildman
runs this script from when it starts, we may get the old version.
Fix this in two ways:
1. Use the version from the same tree as buildman is run from, if
available
2. Failing that, allow the -q flag to be missing
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
A large number of changes have happened upstream since our last sync
in commit 65e05ddc1ae2 ("kconfiglib: Update to the 12.14.0 release").
The big motivation for this sync is support for user defined macros
within Kconfig.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Currently, the following scenario will rebuild the first commit even
though it is not really necessary - the commit sha or the position in the
patchset did not change:
$ git am <local-patch-0001>
$ tools/buildman/buildman -P -E -W -b master mx6
<do some more development work>
$ git am <local-patch-0002>
$ tools/buildman/buildman -P -E -W -b master mx6 <- will rebuild the first
commit as well, even
though nothing has
changed about it.
This is due to the fact that previous results directories get removed
when the number of commits change. By removing the _of_#_ part of the
directory path, the commits will be rebuilt only if the commit sha or the
position in the patchset changes. Also, update the testcase to reflect this
change.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
|
|
Now that we are using absolute paths we can remove some of the sys.path
mangling that appears in the tools.
We only need to add the path to 'tools/' so that everything can find
modules relative to that directory.
The special paths for finding pylibfdt remain.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present patman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.
Move patman to use absolute imports. This requires changes in tools which
use the patman libraries (which is most of them).
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present buildman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.
Move buildman to use absolute imports. Also adjust moveconfig.py too since
it uses some buildman modules and cannot work without this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Python does not like the module name being the same as the module
directory. To allow buildman modules to be used from other tools, rename
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We don't need these now that the tools using Python 3. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present buildman does not write its own output files (err, done, the
environment) when using -w. However this is useful for when the build is
run with -s to check it.
In fact ProduceResultSummary() reads the result from those files rather
than using the 'result' info directly. So ProcessResult() does not work
with -w at present. It does not print any output.
Fix this by writing output files even when -w is used.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the environment used by U-Boot is written to the 'env'
directory. This is fine when the output directory is not the same as the
source directory, but when it is (as with -w) it conflicts with the source
directory of the same name.
Rename 'env' to 'out-env' to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is a bad idea to use the default output directory ('..') with -w since
it does a build in that directory and writes various files these.
Require that -o is given to avoid this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This was broken when -a was removed and unfortunately there are no tests
for this. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The naming is slightly different on kernel.org now. Update the regex so
that the test still passes.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The current exit codes of 128 and 129 are useful in that they do not
conflict with those returned by tools, but they are not actually valid.
It seems better to pick some codes which work with 'bit bisect run'.
Update them to 100 (for errors) and 101 (for warnings).
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
A few of these have been done. Drop those and add some new ideas.
Signed-off-by: Simon Glass <sjg@chromium.org>
|