From 87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Wed, 2 Nov 2022 18:51:28 +0100 Subject: Makefile: Rename u-boot-spl.kwb to u-boot-with-spl.kwb MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit File name with pattern u-boot-spl* is used on all places except in kwb image for binary with SPL-only code. Combined binary with both SPL and proper U-Boot in other places has file name pattern u-boot-with-spl*. Make it consistent also for kwb image and rename u-boot-spl.kwb to u-boot-with-spl.kwb as this image contains both SPL and proper U-Boot code. Also update documentation about file name changes. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese --- Kconfig | 2 +- Makefile | 4 ++-- board/Marvell/db-88f6820-gp/README | 6 +++--- board/kobol/helios4/README | 6 +++--- board/solidrun/clearfog/README | 8 ++++---- doc/README.armada-secureboot | 4 ++-- doc/kwboot.1 | 12 ++++++------ include/configs/ds414.h | 2 +- 8 files changed, 22 insertions(+), 22 deletions(-) diff --git a/Kconfig b/Kconfig index ef94f88adc..43d4a48ac8 100644 --- a/Kconfig +++ b/Kconfig @@ -456,7 +456,7 @@ config BUILD_TARGET string "Build target special images" default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10 default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5 - default "u-boot-spl.kwb" if ARCH_MVEBU && SPL + default "u-boot-with-spl.kwb" if ARCH_MVEBU && SPL default "u-boot-elf.srec" if RCAR_GEN3 default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \ ARCH_SUNXI || RISCV || ARCH_ZYNQMP) diff --git a/Makefile b/Makefile index d5c2c97009..eb0cc1ac06 100644 --- a/Makefile +++ b/Makefile @@ -1422,7 +1422,7 @@ KWD_CONFIG_FILE = $(shell \ MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \ -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) -MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \ +MKIMAGEFLAGS_u-boot-with-spl.kwb = -n $(KWD_CONFIG_FILE) \ -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \ $(if $(KEYDIR),-k $(KEYDIR)) @@ -1463,7 +1463,7 @@ u-boot.itb: u-boot-nodtb.bin \ $(BOARD_SIZE_CHECK) endif -u-boot-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE +u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) $(BOARD_SIZE_CHECK) diff --git a/board/Marvell/db-88f6820-gp/README b/board/Marvell/db-88f6820-gp/README index 9bea5b35cb..b4db6ed625 100644 --- a/board/Marvell/db-88f6820-gp/README +++ b/board/Marvell/db-88f6820-gp/README @@ -2,17 +2,17 @@ Update from original Marvell U-Boot to mainline U-Boot: ------------------------------------------------------- The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". To update the SPI NOR flash, please use the following command: -=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ +=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-with-spl.kwb;\ sf update 2000000 0 60000 Note that the original Marvell U-Boot seems to have problems with the "sf update" command. This does not work reliable. So here this command should be used: -=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ +=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-with-spl.kwb;\ sf erase 0 60000;sf write 2000000 0 60000 diff --git a/board/kobol/helios4/README b/board/kobol/helios4/README index 749f048278..d615cdd264 100644 --- a/board/kobol/helios4/README +++ b/board/kobol/helios4/README @@ -7,12 +7,12 @@ $ make helios4_defconfig $ make The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". Now all you need to do is copy this image on a SD card. For example with this command: -$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 +$ sudo dd if=u-boot-with-spl.kwb of=/dev/sdX bs=512 seek=1 Please use the correct device node for your setup instead of "/dev/sdX" here! @@ -38,7 +38,7 @@ Set the SW1 DIP switches to UART boot (see above). Run the following command to initiate U-Boot download: - ./tools/kwboot -p -b u-boot-spl.kwb /dev/ttyUSBX + ./tools/kwboot -p -b u-boot-with-spl.kwb /dev/ttyUSBX Use the correct UART device node for /dev/ttyUSBX. diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 9375be8495..ed4a712c5a 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -7,12 +7,12 @@ $ make clearfog_defconfig $ make The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". Now all you need to do is copy this image on a SD card. For example with this command: -$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 +$ sudo dd if=u-boot-with-spl.kwb of=/dev/sdX bs=512 seek=1 Please use the correct device node for your setup instead of "/dev/sdX" here! @@ -29,7 +29,7 @@ command: Install U-Boot on eMMC boot partition from Linux running on Clearfog: echo 0 > /sys/block/mmcblk0boot0/force_ro - dd if=u-boot-spl.kwb of=/dev/mmcblk0boot0 + dd if=u-boot-with-spl.kwb of=/dev/mmcblk0boot0 Note that the SD card is not accessible when the Clearfog SOM has eMMC. Consider initial boot from UART (see below). @@ -66,7 +66,7 @@ Set the SW1 DIP switches to UART boot (see above). Run the following command to initiate U-Boot download: - ./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX + ./tools/kwboot -b u-boot-with-spl.kwb /dev/ttyUSBX Use the correct UART device node for /dev/ttyUSBX. diff --git a/doc/README.armada-secureboot b/doc/README.armada-secureboot index 157cb5a231..4ec89d5c06 100644 --- a/doc/README.armada-secureboot +++ b/doc/README.armada-secureboot @@ -257,13 +257,13 @@ ARM architecture The creation of the boot image is done via the usual invocation of make (with a suitably set CROSS_COMPILE environment variable, of course). The resulting boot -image u-boot-spl.kwb can then be tested, if so desired. The hdrparser from [5] +image u-boot-with-spl.kwb can then be tested, if so desired. The hdrparser from [5] can be used for this purpose. To build the tool, invoke make in the 'tools/marvell/doimage_mv' directory of [5], which builds a stand-alone hdrparser executable. A test can be conducted by calling hdrparser with the produced boot image and the following (mandatory) parameters: -./hdrparser -k 0 -t u-boot-spl.kwb +./hdrparser -k 0 -t u-boot-with-spl.kwb Here we assume that the CSK index is 0 and the boot image file resides in the same directory (adapt accordingly if needed). The tool should report that all diff --git a/doc/kwboot.1 b/doc/kwboot.1 index 0863d197fd..a528fbbe8c 100644 --- a/doc/kwboot.1 +++ b/doc/kwboot.1 @@ -149,25 +149,25 @@ Tested values for \fIbaudrate\fP for Armada 38x include: 115200, .SH "EXAMPLES" -Instruct BootROM to enter boot Xmodem boot mode, send \fIu-boot-spl.kwb\fP +Instruct BootROM to enter boot Xmodem boot mode, send \fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP at 115200 Bd and run terminal program: .IP -.B kwboot -b u-boot-spl.kwb -t /dev/ttyUSB0 +.B kwboot -b u-boot-with-spl.kwb -t /dev/ttyUSB0 .PP Instruct BootROM to enter boot Xmodem boot mode, send header of -\fIu-boot-spl.kwb\fP kwbimage file via Xmodem at 115200 Bd, then instruct +\fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem at 115200 Bd, then instruct BootROM to change baudrate to 5200000 Bd, send data part of the kwbimage file via Xmodem at high speed and finally run terminal program: .IP -.B kwboot -b u-boot-spl.kwb -B 5200000 -t /dev/ttyUSB0 +.B kwboot -b u-boot-with-spl.kwb -B 5200000 -t /dev/ttyUSB0 .PP -Only send \fIu-boot-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP +Only send \fIu-boot-with-spl.kwb\fP kwbimage file via Xmodem on \fI/dev/ttyUSB0\fP at 115200 Bd: .IP -.B kwboot -D u-boot-spl.kwb /dev/ttyUSB0 +.B kwboot -D u-boot-with-spl.kwb /dev/ttyUSB0 .PP Instruct BootROM to enter console debug mode and run terminal program on diff --git a/include/configs/ds414.h b/include/configs/ds414.h index f8273a92f1..76d1713fdc 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -50,7 +50,7 @@ "ethmtu=1500\0eth1mtu=1500\0" \ "update_uboot=sf probe; dhcp; " \ "mw.b ${loadaddr} 0x0 0xd0000; " \ - "tftpboot ${loadaddr} u-boot-spl.kwb; " \ + "tftpboot ${loadaddr} u-boot-with-spl.kwb; " \ "sf update ${loadaddr} 0x0 0xd0000\0" -- cgit v1.2.3