From b3d97f8ce34011b8928919822eb17b98477f3d72 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 18 May 2023 00:02:39 +0200 Subject: ARM: stm32: Power cycle Buck3 in reset on DHSOM In case the DHSOM is in suspend state and either reset button is pushed or IWDG2 triggers a watchdog reset, then DRAM initialization could fail as follows: " RAM: DDR3L 32bits 2x4Gb 533MHz DDR invalid size : 0x4, expected 0x40000000 DRAM init failed: -22 ### ERROR ### Please RESET the board ### " Avoid this failure by not keeping any Buck regulators enabled during reset, let the SoC and DRAMs power cycle fully. Since the change which keeps Buck3 VDD enabled during reset is ST specific, move this addition to ST specific SPL board initialization so that it wouldn't affect the DHSOM . Signed-off-by: Marek Vasut Reviewed-by: Patrick Delaunay --- board/st/common/stpmic1.c | 10 +++------- board/st/common/stpmic1.h | 2 +- board/st/stm32mp1/spl.c | 13 +++++++++++-- 3 files changed, 15 insertions(+), 10 deletions(-) diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c index d52dce4f65..969ad48486 100644 --- a/board/st/common/stpmic1.c +++ b/board/st/common/stpmic1.c @@ -185,21 +185,17 @@ static int stmpic_buck1_set(struct udevice *dev, u32 voltage_mv) } /* early init of PMIC */ -void stpmic1_init(u32 voltage_mv) +struct udevice *stpmic1_init(u32 voltage_mv) { struct udevice *dev; if (uclass_get_device_by_driver(UCLASS_PMIC, DM_DRIVER_GET(pmic_stpmic1), &dev)) - return; + return NULL; /* update VDDCORE = BUCK1 */ if (voltage_mv) stmpic_buck1_set(dev, voltage_mv); - /* Keep vdd on during the reset cycle */ - pmic_clrsetbits(dev, - STPMIC1_BUCKS_MRST_CR, - STPMIC1_MRST_BUCK(STPMIC1_BUCK3), - STPMIC1_MRST_BUCK(STPMIC1_BUCK3)); + return dev; } diff --git a/board/st/common/stpmic1.h b/board/st/common/stpmic1.h index b17d6f1633..7a7169d7ce 100644 --- a/board/st/common/stpmic1.h +++ b/board/st/common/stpmic1.h @@ -3,4 +3,4 @@ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved */ -void stpmic1_init(u32 voltage_mv); +struct udevice *stpmic1_init(u32 voltage_mv); diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c index 747ec7e445..8b4a529f75 100644 --- a/board/st/stm32mp1/spl.c +++ b/board/st/stm32mp1/spl.c @@ -5,6 +5,8 @@ #include #include +#include +#include #include #include "../common/stpmic1.h" @@ -19,8 +21,15 @@ void board_vddcore_init(u32 voltage_mv) int board_early_init_f(void) { - if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER)) - stpmic1_init(opp_voltage_mv); + if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER)) { + struct udevice *dev = stpmic1_init(opp_voltage_mv); + + /* Keep vdd on during the reset cycle */ + pmic_clrsetbits(dev, + STPMIC1_BUCKS_MRST_CR, + STPMIC1_MRST_BUCK(STPMIC1_BUCK3), + STPMIC1_MRST_BUCK(STPMIC1_BUCK3)); + } return 0; } -- cgit v1.2.3