From b9512dffcc066bc33a69c5b47e5c30d6a7209726 Mon Sep 17 00:00:00 2001 From: "sw.multimedia" Date: Fri, 3 Sep 2021 22:00:36 +0800 Subject: starfive: apply the pinctl to dts --- arch/riscv/dts/jh7100-beaglev-starlight.dts | 323 ++++++++++++++++++++++++- arch/riscv/dts/jh7100.dtsi | 12 +- include/dt-bindings/pinctrl/pinctrl-starfive.h | 274 +++++++++++++++++++++ 3 files changed, 597 insertions(+), 12 deletions(-) create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive.h diff --git a/arch/riscv/dts/jh7100-beaglev-starlight.dts b/arch/riscv/dts/jh7100-beaglev-starlight.dts index b7e9ac531d..73e2f89acf 100644 --- a/arch/riscv/dts/jh7100-beaglev-starlight.dts +++ b/arch/riscv/dts/jh7100-beaglev-starlight.dts @@ -5,6 +5,7 @@ #include "jh7100.dtsi" #include #include +#include #include / { @@ -85,13 +86,306 @@ }; }; +&gmac { + snps,reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins>; +}; + +&gpio { + /* don't reset gpio mux for serial console on uart3 */ + starfive,keep-gpiomux = <13 14>; + + gmac_pins: gmac-0 { + gtxclk-pins { + pins = ; + bias-pull-up; + drive-strength = <35>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + miitxclk-pins { + pins = ; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + tx-pins { + pins = , + , + , + , + , + , + , + , + ; + bias-pull-up; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + rxclk-pins { + pins = ; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <6>; + }; + rxer-pins { + pins = ; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + rx-pins { + pins = , + , + , + , + , + , + , + , + , + , + , + , + ; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = , + ; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c1_pins: i2c1-0 { + i2c-pins { + pinmux = , + ; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = , + ; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + pwm_pins: pwm-0 { + pwm-pins { + pinmux = , + , + ; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + sdio0_pins: sdio0-0 { + clk-pins { + pinmux = ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + sdio-pins { + pinmux = , + , + , + , + , + ; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + + sdio1_pins: sdio1-0 { + clk-pins { + pinmux = ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + sdio-pins { + pinmux = , + , + , + , + ; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + + spi2_pins: spi2-0 { + mosi-pin { + pinmux = ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + miso-pin { + pinmux = ; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + sck-pin { + pinmux = ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + ss-pins { + pinmux = , + ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + + uart0_pins: uart0-0 { + rx-pins { + pinmux = , + ; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + tx-pins { + pinmux = , + ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + + uart3_pins: uart3-0 { + rx-pins { + pinmux = ; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + tx-pins { + pinmux = ; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + &i2c0 { clock-frequency = <100000>; i2c-sda-hold-time-ns = <300>; i2c-sda-falling-time-ns = <500>; i2c-scl-falling-time-ns = <500>; - scl-gpio = <&gpio 62 GPIO_ACTIVE_HIGH>; - sda-gpio = <&gpio 61 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "okay"; imx219@10 { @@ -143,8 +437,8 @@ i2c-sda-hold-time-ns = <300>; i2c-sda-falling-time-ns = <100>; i2c-scl-falling-time-ns = <100>; - scl-gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; - sda-gpio = <&gpio 48 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; ac108_a: ac108@3b { @@ -215,8 +509,8 @@ i2c-sda-hold-time-ns = <300>; i2c-sda-falling-time-ns = <500>; i2c-scl-falling-time-ns = <500>; - scl-gpio = <&gpio 60 GPIO_ACTIVE_HIGH>; - sda-gpio = <&gpio 59 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "okay"; seeed_plane_i2c@45 { @@ -261,6 +555,12 @@ clock-frequency = <27000000>; }; +&ptc { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &qspi { nor_flash: nor-flash@0 { compatible = "spi-flash"; @@ -297,7 +597,8 @@ broken-cd; bus-width = <4>; cap-sd-highspeed; - max-frequency = <10000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_pins>; status = "okay"; }; @@ -311,6 +612,8 @@ max-frequency = <10000000>; mmc-pwrseq = <&wifi_pwrseq>; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio1_pins>; status = "okay"; wifi@1 { @@ -552,6 +855,8 @@ }; &spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; status = "okay"; spi_dev0: spi@0 { @@ -562,10 +867,14 @@ }; &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; status = "okay"; }; &uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; status = "okay"; }; diff --git a/arch/riscv/dts/jh7100.dtsi b/arch/riscv/dts/jh7100.dtsi index c20231e99b..eaabebf5b5 100644 --- a/arch/riscv/dts/jh7100.dtsi +++ b/arch/riscv/dts/jh7100.dtsi @@ -262,15 +262,17 @@ status = "disabled"; }; - gpio: gpio@11910000 { - compatible = "starfive,jh7100-gpio"; - reg = <0x0 0x11910000 0x0 0x10000>; + gpio: pinctrl@11910000 { + compatible = "starfive,jh7100-pinctrl"; + reg = <0x0 0x11910000 0x0 0x10000>, + <0x0 0x11858000 0x0 0x1000>; + reg-names = "gpio", "padctl"; clocks = <&clkgen JH7100_CLK_GPIO_APB>; gpio-controller; #gpio-cells = <2>; + interrupts = <32>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <32>; }; i2c0: i2c@118b0000 { @@ -412,7 +414,7 @@ clocks = <&clkgen JH7100_CLK_PWM_APB>; #pwm-cells = <3>; sifive,npwm = <8>; - + status = "disabled"; }; qspi: spi@11860000 { diff --git a/include/dt-bindings/pinctrl/pinctrl-starfive.h b/include/dt-bindings/pinctrl/pinctrl-starfive.h new file mode 100644 index 0000000000..3dd2a886b9 --- /dev/null +++ b/include/dt-bindings/pinctrl/pinctrl-starfive.h @@ -0,0 +1,274 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2021 Emil Renner Berthing + */ +#ifndef _DT_BINDINGS_PINCTRL_STARFIVE_H +#define _DT_BINDINGS_PINCTRL_STARFIVE_H + +#define PAD_GPIO_OFFSET 0 +#define PAD_FUNC_SHARE_OFFSET 64 +#define PAD_GPIO(x) (PAD_GPIO_OFFSET + (x)) +#define PAD_FUNC_SHARE(x) (PAD_FUNC_SHARE_OFFSET + (x)) + +/* + * GPIOMUX bits: + * | 31 - 24 | 23 - 16 | 15 - 8 | 7 | 6 | 5 - 0 | + * | dout | doen | din | dout rev | doen rev | gpio nr | + * + * dout: output signal + * doen: output enable signal + * din: optional input signal, 0xff = none + * dout rev: output signal reverse bit + * doen rev: output enable signal reverse bit + * gpio nr: gpio number, 0 - 63 + */ +#define GPIOMUX(n, dout, doen, din) ( \ + (((dout) & 0x80000000) >> (31 - 7)) | (((dout) & 0xff) << 24) | \ + (((doen) & 0x80000000) >> (31 - 6)) | (((doen) & 0xff) << 16) | \ + (((din) & 0xff) << 8) | \ + ((n) & 0x3f)) + +#define GPO_REVERSE 0x80000000 + +#define GPO_LOW 0 +#define GPO_HIGH 1 +#define GPO_ENABLE 0 +#define GPO_DISABLE 1 +#define GPO_CLK_GMAC_PAPHYREF 2 +#define GPO_JTAG_TDO 3 +#define GPO_JTAG_TDO_OEN 4 +#define GPO_DMIC_CLK_OUT 5 +#define GPO_DSP_JTDOEN_PAD 6 +#define GPO_DSP_JTDO_PAD 7 +#define GPO_I2C0_PAD_SCK_OE 8 +#define GPO_I2C0_PAD_SCK_OEN (GPO_I2C0_PAD_SCK_OE | GPO_REVERSE) +#define GPO_I2C0_PAD_SDA_OE 9 +#define GPO_I2C0_PAD_SDA_OEN (GPO_I2C0_PAD_SDA_OE | GPO_REVERSE) +#define GPO_I2C1_PAD_SCK_OE 10 +#define GPO_I2C1_PAD_SCK_OEN (GPO_I2C1_PAD_SCK_OE | GPO_REVERSE) +#define GPO_I2C1_PAD_SDA_OE 11 +#define GPO_I2C1_PAD_SDA_OEN (GPO_I2C1_PAD_SDA_OE | GPO_REVERSE) +#define GPO_I2C2_PAD_SCK_OE 12 +#define GPO_I2C2_PAD_SCK_OEN (GPO_I2C2_PAD_SCK_OE | GPO_REVERSE) +#define GPO_I2C2_PAD_SDA_OE 13 +#define GPO_I2C2_PAD_SDA_OEN (GPO_I2C2_PAD_SDA_OE | GPO_REVERSE) +#define GPO_I2C3_PAD_SCK_OE 14 +#define GPO_I2C3_PAD_SCK_OEN (GPO_I2C3_PAD_SCK_OE | GPO_REVERSE) +#define GPO_I2C3_PAD_SDA_OE 15 +#define GPO_I2C3_PAD_SDA_OEN (GPO_I2C3_PAD_SDA_OE | GPO_REVERSE) +#define GPO_I2SRX_BCLK_OUT 16 +#define GPO_I2SRX_BCLK_OUT_OEN 17 +#define GPO_I2SRX_LRCK_OUT 18 +#define GPO_I2SRX_LRCK_OUT_OEN 19 +#define GPO_I2SRX_MCLK_OUT 20 +#define GPO_I2STX_BCLK_OUT 21 +#define GPO_I2STX_BCLK_OUT_OEN 22 +#define GPO_I2STX_LRCK_OUT 23 +#define GPO_I2STX_LRCK_OUT_OEN 24 +#define GPO_I2STX_MCLK_OUT 25 +#define GPO_I2STX_SDOUT0 26 +#define GPO_I2STX_SDOUT1 27 +#define GPO_LCD_PAD_CSM_N 28 +#define GPO_PWM_PAD_OE_N_BIT0 29 +#define GPO_PWM_PAD_OE_N_BIT1 30 +#define GPO_PWM_PAD_OE_N_BIT2 31 +#define GPO_PWM_PAD_OE_N_BIT3 32 +#define GPO_PWM_PAD_OE_N_BIT4 33 +#define GPO_PWM_PAD_OE_N_BIT5 34 +#define GPO_PWM_PAD_OE_N_BIT6 35 +#define GPO_PWM_PAD_OE_N_BIT7 36 +#define GPO_PWM_PAD_OUT_BIT0 37 +#define GPO_PWM_PAD_OUT_BIT1 38 +#define GPO_PWM_PAD_OUT_BIT2 39 +#define GPO_PWM_PAD_OUT_BIT3 40 +#define GPO_PWM_PAD_OUT_BIT4 41 +#define GPO_PWM_PAD_OUT_BIT5 42 +#define GPO_PWM_PAD_OUT_BIT6 43 +#define GPO_PWM_PAD_OUT_BIT7 44 +#define GPO_PWMDAC_LEFT_OUT 45 +#define GPO_PWMDAC_RIGHT_OUT 46 +#define GPO_QSPI_CSN1_OUT 47 +#define GPO_QSPI_CSN2_OUT 48 +#define GPO_QSPI_CSN3_OUT 49 +#define GPO_REGISTER23_SCFG_CMSENSOR_RST0 50 +#define GPO_REGISTER23_SCFG_CMSENSOR_RST1 51 +#define GPO_REGISTER32_SCFG_GMAC_PHY_RSTN 52 +#define GPO_SDIO0_PAD_CARD_POWER_EN 53 +#define GPO_SDIO0_PAD_CCLK_OUT 54 +#define GPO_SDIO0_PAD_CCMD_OE 55 +#define GPO_SDIO0_PAD_CCMD_OEN (GPO_SDIO0_PAD_CCMD_OE | GPO_REVERSE) +#define GPO_SDIO0_PAD_CCMD_OUT 56 +#define GPO_SDIO0_PAD_CDATA_OE_BIT0 57 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT0 (GPO_SDIO0_PAD_CDATA_OE_BIT0 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT1 58 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT1 (GPO_SDIO0_PAD_CDATA_OE_BIT1 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT2 59 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT2 (GPO_SDIO0_PAD_CDATA_OE_BIT2 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT3 60 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT3 (GPO_SDIO0_PAD_CDATA_OE_BIT3 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT4 61 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT4 (GPO_SDIO0_PAD_CDATA_OE_BIT4 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT5 62 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT5 (GPO_SDIO0_PAD_CDATA_OE_BIT5 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT6 63 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT6 (GPO_SDIO0_PAD_CDATA_OE_BIT6 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OE_BIT7 64 +#define GPO_SDIO0_PAD_CDATA_OEN_BIT7 (GPO_SDIO0_PAD_CDATA_OE_BIT7 | GPO_REVERSE) +#define GPO_SDIO0_PAD_CDATA_OUT_BIT0 65 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT1 66 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT2 67 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT3 68 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT4 69 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT5 70 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT6 71 +#define GPO_SDIO0_PAD_CDATA_OUT_BIT7 72 +#define GPO_SDIO0_PAD_RST_N 73 +#define GPO_SDIO1_PAD_CARD_POWER_EN 74 +#define GPO_SDIO1_PAD_CCLK_OUT 75 +#define GPO_SDIO1_PAD_CCMD_OE 76 +#define GPO_SDIO1_PAD_CCMD_OEN (GPO_SDIO1_PAD_CCMD_OE | GPO_REVERSE) +#define GPO_SDIO1_PAD_CCMD_OUT 77 +#define GPO_SDIO1_PAD_CDATA_OE_BIT0 78 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT0 (GPO_SDIO1_PAD_CDATA_OE_BIT0 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT1 79 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT1 (GPO_SDIO1_PAD_CDATA_OE_BIT1 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT2 80 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT2 (GPO_SDIO1_PAD_CDATA_OE_BIT2 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT3 81 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT3 (GPO_SDIO1_PAD_CDATA_OE_BIT3 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT4 82 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT4 (GPO_SDIO1_PAD_CDATA_OE_BIT4 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT5 83 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT5 (GPO_SDIO1_PAD_CDATA_OE_BIT5 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT6 84 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT6 (GPO_SDIO1_PAD_CDATA_OE_BIT6 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OE_BIT7 85 +#define GPO_SDIO1_PAD_CDATA_OEN_BIT7 (GPO_SDIO1_PAD_CDATA_OE_BIT7 | GPO_REVERSE) +#define GPO_SDIO1_PAD_CDATA_OUT_BIT0 86 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT1 87 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT2 88 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT3 89 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT4 90 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT5 91 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT6 92 +#define GPO_SDIO1_PAD_CDATA_OUT_BIT7 93 +#define GPO_SDIO1_PAD_RST_N 94 +#define GPO_SPDIF_TX_SDOUT 95 +#define GPO_SPDIF_TX_SDOUT_OEN 96 +#define GPO_SPI0_PAD_OE_N 97 +#define GPO_SPI0_PAD_SCK_OUT 98 +#define GPO_SPI0_PAD_SS_0_N 99 +#define GPO_SPI0_PAD_SS_1_N 100 +#define GPO_SPI0_PAD_TXD 101 +#define GPO_SPI1_PAD_OE_N 102 +#define GPO_SPI1_PAD_SCK_OUT 103 +#define GPO_SPI1_PAD_SS_0_N 104 +#define GPO_SPI1_PAD_SS_1_N 105 +#define GPO_SPI1_PAD_TXD 106 +#define GPO_SPI2_PAD_OE_N 107 +#define GPO_SPI2_PAD_SCK_OUT 108 +#define GPO_SPI2_PAD_SS_0_N 109 +#define GPO_SPI2_PAD_SS_1_N 110 +#define GPO_SPI2_PAD_TXD 111 +#define GPO_SPI2AHB_PAD_OE_N_BIT0 112 +#define GPO_SPI2AHB_PAD_OE_N_BIT1 113 +#define GPO_SPI2AHB_PAD_OE_N_BIT2 114 +#define GPO_SPI2AHB_PAD_OE_N_BIT3 115 +#define GPO_SPI2AHB_PAD_TXD_BIT0 116 +#define GPO_SPI2AHB_PAD_TXD_BIT1 117 +#define GPO_SPI2AHB_PAD_TXD_BIT2 118 +#define GPO_SPI2AHB_PAD_TXD_BIT3 119 +#define GPO_SPI3_PAD_OE_N 120 +#define GPO_SPI3_PAD_SCK_OUT 121 +#define GPO_SPI3_PAD_SS_0_N 122 +#define GPO_SPI3_PAD_SS_1_N 123 +#define GPO_SPI3_PAD_TXD 124 +#define GPO_UART0_PAD_DTRN 125 +#define GPO_UART0_PAD_RTSN 126 +#define GPO_UART0_PAD_SOUT 127 +#define GPO_UART1_PAD_SOUT 128 +#define GPO_UART2_PAD_DTR_N 129 +#define GPO_UART2_PAD_RTS_N 130 +#define GPO_UART2_PAD_SOUT 131 +#define GPO_UART3_PAD_SOUT 132 +#define GPO_USB_DRV_BUS 133 + +#define GPI_NONE 0xffffffff + +#define GPI_CPU_JTAG_TCK 0 +#define GPI_CPU_JTAG_TDI 1 +#define GPI_CPU_JTAG_TMS 2 +#define GPI_CPU_JTAG_TRST 3 +#define GPI_DMIC_SDIN_BIT0 4 +#define GPI_DMIC_SDIN_BIT1 5 +#define GPI_DSP_JTCK_PAD 6 +#define GPI_DSP_JTDI_PAD 7 +#define GPI_DSP_JTMS_PAD 8 +#define GPI_DSP_TRST_PAD 9 +#define GPI_I2C0_PAD_SCK_IN 10 +#define GPI_I2C0_PAD_SDA_IN 11 +#define GPI_I2C1_PAD_SCK_IN 12 +#define GPI_I2C1_PAD_SDA_IN 13 +#define GPI_I2C2_PAD_SCK_IN 14 +#define GPI_I2C2_PAD_SDA_IN 15 +#define GPI_I2C3_PAD_SCK_IN 16 +#define GPI_I2C3_PAD_SDA_IN 17 +#define GPI_I2SRX_BCLK_IN 18 +#define GPI_I2SRX_LRCK_IN 19 +#define GPI_I2SRX_SDIN_BIT0 20 +#define GPI_I2SRX_SDIN_BIT1 21 +#define GPI_I2SRX_SDIN_BIT2 22 +#define GPI_I2STX_BCLK_IN 23 +#define GPI_I2STX_LRCK_IN 24 +#define GPI_SDIO0_PAD_CARD_DETECT_N 25 +#define GPI_SDIO0_PAD_CARD_WRITE_PRT 26 +#define GPI_SDIO0_PAD_CCMD_IN 27 +#define GPI_SDIO0_PAD_CDATA_IN_BIT0 28 +#define GPI_SDIO0_PAD_CDATA_IN_BIT1 29 +#define GPI_SDIO0_PAD_CDATA_IN_BIT2 30 +#define GPI_SDIO0_PAD_CDATA_IN_BIT3 31 +#define GPI_SDIO0_PAD_CDATA_IN_BIT4 32 +#define GPI_SDIO0_PAD_CDATA_IN_BIT5 33 +#define GPI_SDIO0_PAD_CDATA_IN_BIT6 34 +#define GPI_SDIO0_PAD_CDATA_IN_BIT7 35 +#define GPI_SDIO1_PAD_CARD_DETECT_N 36 +#define GPI_SDIO1_PAD_CARD_WRITE_PRT 37 +#define GPI_SDIO1_PAD_CCMD_IN 38 +#define GPI_SDIO1_PAD_CDATA_IN_BIT0 39 +#define GPI_SDIO1_PAD_CDATA_IN_BIT1 40 +#define GPI_SDIO1_PAD_CDATA_IN_BIT2 41 +#define GPI_SDIO1_PAD_CDATA_IN_BIT3 42 +#define GPI_SDIO1_PAD_CDATA_IN_BIT4 43 +#define GPI_SDIO1_PAD_CDATA_IN_BIT5 44 +#define GPI_SDIO1_PAD_CDATA_IN_BIT6 45 +#define GPI_SDIO1_PAD_CDATA_IN_BIT7 46 +#define GPI_SPDIF_RX_SDIN 47 +#define GPI_SPI0_PAD_RXD 48 +#define GPI_SPI0_PAD_SS_IN_N 49 +#define GPI_SPI1_PAD_RXD 50 +#define GPI_SPI1_PAD_SS_IN_N 51 +#define GPI_SPI2_PAD_RXD 52 +#define GPI_SPI2_PAD_SS_IN_N 53 +#define GPI_SPI2AHB_PAD_RXD_BIT0 54 +#define GPI_SPI2AHB_PAD_RXD_BIT1 55 +#define GPI_SPI2AHB_PAD_RXD_BIT2 56 +#define GPI_SPI2AHB_PAD_RXD_BIT3 57 +#define GPI_SPI2AHB_PAD_SS_N 58 +#define GPI_SPI2AHB_SLV_SCLKIN 59 +#define GPI_SPI3_PAD_RXD 60 +#define GPI_SPI3_PAD_SS_IN_N 61 +#define GPI_UART0_PAD_CTSN 62 +#define GPI_UART0_PAD_DCDN 63 +#define GPI_UART0_PAD_DSRN 64 +#define GPI_UART0_PAD_RIN 65 +#define GPI_UART0_PAD_SIN 66 +#define GPI_UART1_PAD_SIN 67 +#define GPI_UART2_PAD_CTS_N 68 +#define GPI_UART2_PAD_DCD_N 69 +#define GPI_UART2_PAD_DSR_N 70 +#define GPI_UART2_PAD_RI_N 71 +#define GPI_UART2_PAD_SIN 72 +#define GPI_UART3_PAD_SIN 73 +#define GPI_USB_OVER_CURRENT 74 + +#endif -- cgit v1.2.3