From d3c96b9b46a878e59ecb0c267fe846bbb556f963 Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Thu, 8 Jul 2021 09:08:20 +0800 Subject: board: sifive: unmatched: refine GEMGXL initialized function in SPL Create a new function spl_reset_device_by_gpio to reset the device whose reset pin is connected to the GPIO. Then, using this function to initialize GEMGXL. Signed-off-by: Vincent Chen Reviewed-by: Leo Yu-Chi Liang --- board/sifive/unmatched/spl.c | 58 +++++++++++++++++++++++++++++--------------- 1 file changed, 39 insertions(+), 19 deletions(-) diff --git a/board/sifive/unmatched/spl.c b/board/sifive/unmatched/spl.c index 5e1333b09a..b598f9f614 100644 --- a/board/sifive/unmatched/spl.c +++ b/board/sifive/unmatched/spl.c @@ -22,43 +22,63 @@ #define MODE_SELECT_SD 0xb #define MODE_SELECT_MASK GENMASK(3, 0) -int spl_board_init_f(void) +static inline int spl_reset_device_by_gpio(const char *label, int pin, int low_width) { int ret; - ret = spl_soc_init(); + ret = gpio_request(pin, label); if (ret) { - debug("HiFive Unmatched FU740 SPL init failed: %d\n", ret); + debug("%s gpio request failed: %d\n", label, ret); + return ret; + } + + ret = gpio_direction_output(pin, 1); + if (ret) { + debug("%s gpio direction set failed: %d\n", label, ret); return ret; } + udelay(1); + + gpio_set_value(pin, 0); + udelay(low_width); + gpio_set_value(pin, 1); + + return ret; +} + +static inline int spl_gemgxl_init(void) +{ + int ret; /* * GEMGXL init VSC8541 PHY reset sequence; * leave pull-down active for 2ms */ udelay(2000); - ret = gpio_request(GEM_PHY_RESET, "gem_phy_reset"); + ret = spl_reset_device_by_gpio("gem_phy_reset", GEM_PHY_RESET, 1); + mdelay(15); + + return ret; +} + +int spl_board_init_f(void) +{ + int ret; + + ret = spl_soc_init(); if (ret) { - debug("gem_phy_reset gpio request failed: %d\n", ret); - return ret; + debug("HiFive Unmatched FU740 SPL init failed: %d\n", ret); + goto end; } - /* Set GPIO 12 (PHY NRESET) */ - ret = gpio_direction_output(GEM_PHY_RESET, 1); + ret = spl_gemgxl_init(); if (ret) { - debug("gem_phy_reset gpio direction set failed: %d\n", ret); - return ret; + debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret); + goto end; } - udelay(1); - - /* Reset PHY again to enter unmanaged mode */ - gpio_set_value(GEM_PHY_RESET, 0); - udelay(1); - gpio_set_value(GEM_PHY_RESET, 1); - mdelay(15); - - return 0; +end: + return ret; } u32 spl_boot_device(void) -- cgit v1.2.3