From dfbdc69c5d8c8b7ddd467191317d19c8bc038676 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Wed, 24 Aug 2022 15:59:15 +0200 Subject: imx: kontron-sl-mx8mm: Adjust devicetree names, compatibles and model strings This adjusts the names of the boards and SoMs to the official naming used by Kontron marketing. These changes also affect devicetree names and compatibles. The same changes have been submitted to the Linux kernel. Signed-off-by: Frieder Schrempf Reviewed-by: Fabio Estevam --- arch/arm/dts/Makefile | 2 +- arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi | 144 ++++++++++ arch/arm/dts/imx8mm-kontron-bl.dts | 350 ++++++++++++++++++++++++ arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 144 ---------- arch/arm/dts/imx8mm-kontron-n801x-s.dts | 350 ------------------------ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 316 --------------------- arch/arm/dts/imx8mm-kontron-sl.dtsi | 316 +++++++++++++++++++++ board/kontron/sl-mx8mm/MAINTAINERS | 2 +- board/kontron/sl-mx8mm/spl.c | 3 +- configs/kontron-sl-mx8mm_defconfig | 2 +- 10 files changed, 815 insertions(+), 814 deletions(-) create mode 100644 arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-bl.dts delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s.dts delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-som.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-sl.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0459be1f86..8dd50d7adb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -947,7 +947,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-evk.dtb \ imx8mm-icore-mx8mm-ctouch2.dtb \ imx8mm-icore-mx8mm-edimm2.2.dtb \ - imx8mm-kontron-n801x-s.dtb \ + imx8mm-kontron-bl.dtb \ imx8mm-mx8menlo.dtb \ imx8mm-venice.dtb \ imx8mm-venice-gw71xx-0x.dtb \ diff --git a/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi new file mode 100644 index 0000000000..2c62f05cec --- /dev/null +++ b/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-u-boot.dtsi" + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&crypto { + u-boot,dm-spl; +}; + +&sec_jr0 { + u-boot,dm-spl; +}; + +&sec_jr1 { + u-boot,dm-spl; +}; + +&sec_jr2 { + u-boot,dm-spl; +}; + +&i2c1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&i2c2 { + status = "okay"; + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_ecspi1 { + u-boot,dm-spl; +}; + +&pinctrl_i2c1 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + /* Disable Pullup for SD_VSEL */ + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 + >; +}; + +&pinctrl_uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_200mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pca9450 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { + u-boot,dm-spl; +}; + +&ecspi1 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; + +&pinctrl_wdog { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx8mm-kontron-bl.dts b/arch/arm/dts/imx8mm-kontron-bl.dts new file mode 100644 index 0000000000..ca533baedc --- /dev/null +++ b/arch/arm/dts/imx8mm-kontron-bl.dts @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-sl.dtsi" + +/ { + model = "Kontron BL i.MX8MM (N801X S)"; + compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii-rxid"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +}; diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi deleted file mode 100644 index 2c62f05cec..0000000000 --- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -#include "imx8mm-u-boot.dtsi" - -/ { - aliases { - usb0 = &usbotg1; - usb1 = &usbotg2; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdog1>; - u-boot,dm-spl; - }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; -}; - -&crypto { - u-boot,dm-spl; -}; - -&sec_jr0 { - u-boot,dm-spl; -}; - -&sec_jr1 { - u-boot,dm-spl; -}; - -&sec_jr2 { - u-boot,dm-spl; -}; - -&i2c1 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&i2c2 { - status = "okay"; - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&pinctrl_ecspi1 { - u-boot,dm-spl; -}; - -&pinctrl_i2c1 { - u-boot,dm-spl; -}; - -&pinctrl_pmic { - u-boot,dm-spl; - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - /* Disable Pullup for SD_VSEL */ - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 - >; -}; - -&pinctrl_uart3 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&pinctrl_usdhc1 { - u-boot,dm-spl; -}; - -&pinctrl_usdhc1_100mhz { - u-boot,dm-spl; -}; - -&pinctrl_usdhc1_200mhz { - u-boot,dm-spl; -}; - -&pinctrl_usdhc2 { - u-boot,dm-spl; -}; - -&pca9450 { - u-boot,dm-spl; -}; - -&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { - u-boot,dm-spl; -}; - -&ecspi1 { - u-boot,dm-spl; -}; - -&gpio1 { - u-boot,dm-spl; -}; - -&gpio2 { - u-boot,dm-spl; -}; - -&gpio3 { - u-boot,dm-spl; -}; - -&gpio4 { - u-boot,dm-spl; -}; - -&gpio5 { - u-boot,dm-spl; -}; - -&uart3 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&usdhc1 { - u-boot,dm-spl; -}; - -&usdhc2 { - u-boot,dm-spl; -}; - -&wdog1 { - u-boot,dm-spl; -}; - -&pinctrl_wdog { - u-boot,dm-spl; -}; diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s.dts b/arch/arm/dts/imx8mm-kontron-n801x-s.dts deleted file mode 100644 index 23be1ec538..0000000000 --- a/arch/arm/dts/imx8mm-kontron-n801x-s.dts +++ /dev/null @@ -1,350 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx8mm-kontron-n801x-som.dtsi" - -/ { - model = "Kontron i.MX8MM N801X S"; - compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; - - aliases { - ethernet1 = &usbnet; - }; - - /* fixed crystal dedicated to mcp2515 */ - osc_can: clock-osc-can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "osc-can"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_led>; - - led1 { - label = "led1"; - gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - - led2 { - label = "led2"; - gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; - }; - - led3 { - label = "led3"; - gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; - }; - - led4 { - label = "led4"; - gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; - }; - - led5 { - label = "led5"; - gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - }; - - led6 { - label = "led6"; - gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; - }; - }; - - pwm-beeper { - compatible = "pwm-beeper"; - pwms = <&pwm2 0 5000 0>; - }; - - reg_rst_eth2: regulator-rst-eth2 { - compatible = "regulator-fixed"; - regulator-name = "rst-usb-eth2"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_vdd_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&ecspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - status = "okay"; - - can0: can@0 { - compatible = "microchip,mcp2515"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can>; - clocks = <&osc_can>; - interrupt-parent = <&gpio4>; - interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - spi-max-frequency = <10000000>; - vdd-supply = <®_vdd_3v3>; - xceiver-supply = <®_vdd_5v>; - }; -}; - -&ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii-rxid"; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - reg = <0>; - reset-assert-us = <1>; - reset-deassert-us = <15000>; - reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; -}; - -&pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - linux,rs485-enabled-at-boot-time; - uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - over-current-active-low; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - usb1@1 { - compatible = "usb424,9514"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - usbnet: ethernet@1 { - compatible = "usb424,ec00"; - reg = <1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - }; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - vmmc-supply = <®_vdd_3v3>; - vqmmc-supply = <®_nvcc_sd>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - pinctrl_can: cangrp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 - MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 - MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 - MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 - MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ - MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ - >; - }; - - pinctrl_gpio_led: gpioledgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 - MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 - MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 - MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 - MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 - MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 - MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 - MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 - MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 - MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 - MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 - >; - }; - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 - >; - }; - - pinctrl_usb_eth2: usbeth2grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - >; - }; -}; diff --git a/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi deleted file mode 100644 index 39c0ce19ef..0000000000 --- a/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi +++ /dev/null @@ -1,316 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -#include "imx8mm.dtsi" - -/ { - model = "Kontron i.MX8MM N801X SoM"; - compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; - - memory@40000000 { - device_type = "memory"; - /* - * There are multiple SoM flavors with different DDR sizes. - * The smallest is 1GB. For larger sizes the bootloader will - * update the reg property. - */ - reg = <0x0 0x40000000 0 0x80000000>; - }; - - chosen { - stdout-path = &uart3; - }; -}; - -&A53_0 { - cpu-supply = <®_vdd_arm>; -}; - -&A53_1 { - cpu-supply = <®_vdd_arm>; -}; - -&A53_2 { - cpu-supply = <®_vdd_arm>; -}; - -&A53_3 { - cpu-supply = <®_vdd_arm>; -}; - -&ddrc { - operating-points-v2 = <&ddrc_opp_table>; - - ddrc_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100M { - opp-hz = /bits/ 64 <100000000>; - }; - - opp-750M { - opp-hz = /bits/ 64 <750000000>; - }; - }; -}; - -&ecspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - status = "okay"; - - flash@0 { - compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; - spi-max-frequency = <80000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x1e0000>; - }; - - partition@1e0000 { - label = "env"; - reg = <0x1e0000 0x10000>; - }; - - partition@1f0000 { - label = "env_redundant"; - reg = <0x1f0000 0x10000>; - }; - }; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pca9450: pmic@25 { - compatible = "nxp,pca9450a"; - reg = <0x25>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - - regulators { - reg_vdd_soc: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - nxp,dvs-run-voltage = <850000>; - nxp,dvs-standby-voltage = <800000>; - }; - - reg_vdd_arm: BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <950000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - nxp,dvs-run-voltage = <950000>; - nxp,dvs-standby-voltage = <850000>; - }; - - reg_vdd_dram: BUCK3 { - regulator-name = "buck3"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <950000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_3v3: BUCK4 { - regulator-name = "buck4"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_1v8: BUCK5 { - regulator-name = "buck5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_nvcc_dram: BUCK6 { - regulator-name = "buck6"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_nvcc_snvs: LDO1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_snvs: LDO2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdda: LDO3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_phy: LDO4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_nvcc_sd: LDO5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; -}; - -&uart3 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - vmmc-supply = <®_vdd_3v3>; - vqmmc-supply = <®_vdd_1v8>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 - MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 - MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 - MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 - MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 - MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 - MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; -}; diff --git a/arch/arm/dts/imx8mm-kontron-sl.dtsi b/arch/arm/dts/imx8mm-kontron-sl.dtsi new file mode 100644 index 0000000000..11a50cffc8 --- /dev/null +++ b/arch/arm/dts/imx8mm-kontron-sl.dtsi @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "Kontron SL i.MX8MM (N801X SOM)"; + compatible = "kontron,imx8mm-sl", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x1e0000>; + }; + + partition@1e0000 { + label = "env"; + reg = <0x1e0000 0x10000>; + }; + + partition@1f0000 { + label = "env_redundant"; + reg = <0x1f0000 0x10000>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/board/kontron/sl-mx8mm/MAINTAINERS b/board/kontron/sl-mx8mm/MAINTAINERS index 5e68ae0305..e4e12d3f55 100644 --- a/board/kontron/sl-mx8mm/MAINTAINERS +++ b/board/kontron/sl-mx8mm/MAINTAINERS @@ -1,7 +1,7 @@ Kontron SL/BL i.MX8M Mini Boards (N801x) M: Frieder Schrempf S: Maintained -F: arch/arm/dts/imx8mm-kontron-n801x-* +F: arch/arm/dts/imx8mm-kontron* F: board/kontron/sl-mx8mm F: configs/kontron-sl-mx8mm_defconfig F: doc/board/kontron/sl-mx8mm.rst diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c index affdc136e1..00e63659f4 100644 --- a/board/kontron/sl-mx8mm/spl.c +++ b/board/kontron/sl-mx8mm/spl.c @@ -150,7 +150,8 @@ int do_board_detect(void) int board_fit_config_name_match(const char *name) { if (gd->board_type == BOARD_TYPE_KTN_N801X && is_imx8mm() && - !strncmp(name, "imx8mm-kontron-n801x-s", 22)) + (!strcmp(name, "imx8mm-kontron-n801x-s") || + !strcmp(name, "imx8mm-kontron-bl"))) return 0; return -1; diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index f273f22830..3b80ed2e14 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -11,7 +11,7 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_IMX_CONFIG="board/kontron/sl-mx8mm/imximage.cfg" CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s" +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-bl" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_KONTRON_MX8MM=y CONFIG_SPL_MMC=y -- cgit v1.2.3