From ffb78a7c71d555be31c8f8f2bb0fcc2fcfe3892e Mon Sep 17 00:00:00 2001 From: Padmarao Begari Date: Wed, 17 Nov 2021 18:21:19 +0530 Subject: doc: board: Update Microchip MPFS Icicle Kit doc UART1 use for U-Boot and Linux console instead of UART0 and UART0 is reserved for Hart Software Services(HSS). Signed-off-by: Padmarao Begari Reviewed-by: Leo Yu-Chi Liang Reviewed-by: Bin Meng --- doc/board/microchip/mpfs_icicle.rst | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/doc/board/microchip/mpfs_icicle.rst b/doc/board/microchip/mpfs_icicle.rst index c71c2f3cab..a4b10c6bd7 100644 --- a/doc/board/microchip/mpfs_icicle.rst +++ b/doc/board/microchip/mpfs_icicle.rst @@ -20,6 +20,7 @@ The support for following drivers are already enabled: 2. Microchip Clock Driver. 3. Cadence MACB ethernet driver for networking support. 4. Cadence MMC Driver for eMMC/SD support. +5. Microchip I2C Driver. Booting from eMMC using HSS --------------------------- @@ -214,7 +215,8 @@ GPT partition. Booting ~~~~~~~ -You should see the U-Boot prompt on UART0. +You should see the U-Boot prompt on UART1. +(Note: UART0 is reserved for HSS) Sample boot log from MPFS Icicle Kit '''''''''''''''''''''''''''''''''''' @@ -451,7 +453,8 @@ copied payload and Linux image. sudo dd if= of=/dev/sdX2 bs=512 -You should see the U-Boot prompt on UART0. +You should see the U-Boot prompt on UART1. +(Note: UART0 is reserved for HSS) GUID type ~~~~~~~~~ -- cgit v1.2.3