From 14453fbfadc2f98ca35d6033140466c7a4b4947a Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 27 Feb 2019 15:20:36 +0100 Subject: Convert CONFIG_SF_DEFAULT_* to Kconfig This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay --- README | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'README') diff --git a/README b/README index 6525b81e3f..c9a20db34f 100644 --- a/README +++ b/README @@ -2130,21 +2130,6 @@ The following options need to be configured: this is instead controlled by the value of /config/load-environment. -- Serial Flash support - Usage requires an initial 'sf probe' to define the serial - flash parameters, followed by read/write/erase/update - commands. - - The following defaults may be provided by the platform - to handle the common case when only a single serial - flash is present on the system. - - CONFIG_SF_DEFAULT_BUS Bus identifier - CONFIG_SF_DEFAULT_CS Chip-select - CONFIG_SF_DEFAULT_MODE (see include/spi.h) - CONFIG_SF_DEFAULT_SPEED in Hz - - - TFTP Fixed UDP Port: CONFIG_TFTP_PORT -- cgit v1.2.3