From 8a316c9b6215266b8f5f7bbae5ee12e8b8afac83 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 1 Aug 2005 16:49:12 +0200 Subject: Major cleanup for AMCC PPC4xx eval boards. Patch by Stefan Roese, 01 Aug 2005 --- README | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'README') diff --git a/README b/README index c52ccbd9db..6327f64140 100644 --- a/README +++ b/README @@ -295,7 +295,7 @@ The following options need to be configured: CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37 CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG - CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405 + CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900 CONFIG_FPS860L CONFIG_ZUMA @@ -2192,7 +2192,7 @@ configurations; the following names are supported: FADS850SAR_config omap1610h2_config TQM850L_config FADS860T_config omap1610inn_config TQM855L_config FPS850L_config omap5912osk_config TQM860L_config - omap2420h4_config WALNUT405_config + omap2420h4_config walnut_config Yukon8220_config ZPC1900_config @@ -3135,7 +3135,7 @@ locked as (mis-) used as memory, etc. CFG_INIT_RAM_ADDR should be somewhere that won't interfere with your processor/board/system design. The default value you will find in any recent u-boot distribution in - Walnut405.h should work for you. I'd set it to a value larger + walnut.h should work for you. I'd set it to a value larger than your SDRAM module. If you have a 64MB SDRAM module, set it above 400_0000. Just make sure your board has no resources that are supposed to respond to that address! That code in -- cgit v1.2.3