From f113d7d3034672de7d074506a05a7055f1f0dcae Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Thu, 26 May 2022 13:13:21 -0400 Subject: Convert CONFIG_SPL_STACK to Kconfig This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini --- README | 32 -------------------------------- 1 file changed, 32 deletions(-) (limited to 'README') diff --git a/README b/README index 02a2a3ff88..360d357bfb 100644 --- a/README +++ b/README @@ -293,33 +293,6 @@ board_init_r(): SPL-specific notes: - stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined and - CONFIG_SPL_STACK_R_ADDR points into SDRAM - - preloader_console_init() can be called here - typically this is - done by selecting CONFIG_SPL_BOARD_INIT and then supplying a - spl_board_init() function containing this call - - loads U-Boot or (in falcon mode) Linux - - -Configuration Options: ----------------------- - -Configuration depends on the combination of board and CPU type; all -such information is kept in a configuration file -"include/configs/.h". - -Example: For a TQM823L module, all configuration settings are in -"include/configs/TQM823L.h". - - -Many of the options are named exactly as the corresponding Linux -kernel configuration options. The intention is to make it easier to -build a config tool - later. - -- ARM Platform Bus Type(CCI): - CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which - provides full cache coherency between two clusters of multi-core - CPUs and I/O coherency for devices and I/O masters - CONFIG_SYS_FSL_HAS_CCI400 Defined For SoC that has cache coherent interconnect @@ -1659,9 +1632,6 @@ The following options need to be configured: CONFIG_SPL_BSS_START_ADDR Link address for the BSS within the SPL binary. - CONFIG_SPL_STACK - Adress of the start of the stack SPL will use - CONFIG_SPL_PANIC_ON_RAW_IMAGE When defined, SPL will panic() if the image it has loaded does not have a signature. @@ -1675,8 +1645,6 @@ The following options need to be configured: CONFIG_SPL_RELOC_STACK Adress of the start of the stack SPL will use after relocation. If unspecified, this is equal to - CONFIG_SPL_STACK. - CONFIG_SYS_SPL_MALLOC_START Starting address of the malloc pool used in SPL. When this option is set the full malloc is used in SPL and -- cgit v1.2.3