From 822556a93459336c86da09238337b8a8ed217f50 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Thu, 22 Jul 2021 16:20:42 +0100 Subject: arm: dts: sync the Rockhip 3399 SoCs from Linux Sync the rk3399 DTs and associated bits from 5.14-rc1. Signed-off-by: Peter Robinson (Remove the conflict content for vmarc-som) Signed-off-by: Kever Yang --- arch/arm/dts/rk3399-evb.dts | 4 + arch/arm/dts/rk3399-ficus.dts | 29 ++-- arch/arm/dts/rk3399-firefly.dts | 178 +++++++++++++++++--- arch/arm/dts/rk3399-gru.dtsi | 14 +- arch/arm/dts/rk3399-khadas-edge.dtsi | 40 ++++- arch/arm/dts/rk3399-leez-p710.dts | 14 +- arch/arm/dts/rk3399-nanopc-t4.dts | 1 + arch/arm/dts/rk3399-nanopi-r4s.dts | 125 +++++++------- arch/arm/dts/rk3399-nanopi4.dtsi | 18 ++- arch/arm/dts/rk3399-opp.dtsi | 40 ++--- arch/arm/dts/rk3399-orangepi.dts | 72 ++++++++- arch/arm/dts/rk3399-pinebook-pro.dts | 120 ++++++++------ arch/arm/dts/rk3399-puma-haikou.dts | 10 +- arch/arm/dts/rk3399-puma.dtsi | 61 +------ arch/arm/dts/rk3399-roc-pc-mezzanine.dts | 22 ++- arch/arm/dts/rk3399-roc-pc.dtsi | 59 +++++-- arch/arm/dts/rk3399-rock-pi-4.dtsi | 29 ++-- arch/arm/dts/rk3399-rock-pi-4a.dts | 2 +- arch/arm/dts/rk3399-rock-pi-4b.dts | 6 +- arch/arm/dts/rk3399-rock-pi-4c.dts | 6 +- arch/arm/dts/rk3399-rock960.dts | 82 ++++------ arch/arm/dts/rk3399-rock960.dtsi | 10 +- arch/arm/dts/rk3399-rockpro64.dtsi | 95 +++++++++-- arch/arm/dts/rk3399.dtsi | 269 +++++++++++++++++++------------ arch/arm/dts/rk3399pro-vmarc-som.dtsi | 12 +- 25 files changed, 871 insertions(+), 447 deletions(-) (limited to 'arch') diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index 694b0d08d6..7b717ebec8 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -11,6 +11,10 @@ model = "Rockchip RK3399 Evaluation Board"; compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; + aliases { + mmc0 = &sdhci; + }; + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = < diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts index ebe2ee77ba..1ce85a5816 100644 --- a/arch/arm/dts/rk3399-ficus.dts +++ b/arch/arm/dts/rk3399-ficus.dts @@ -27,42 +27,43 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>, - <&user_led4>, <&wlan_led>, <&bt_led>; + pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>, + <&user_led3_pin>, <&user_led4_pin>, + <&wlan_led_pin>, <&bt_led_pin>; - user_led1 { + user_led1: led-1 { label = "red:user1"; gpios = <&gpio4 25 0>; linux,default-trigger = "heartbeat"; }; - user_led2 { + user_led2: led-2 { label = "red:user2"; gpios = <&gpio4 26 0>; linux,default-trigger = "mmc0"; }; - user_led3 { + user_led3: led-3 { label = "red:user3"; gpios = <&gpio4 30 0>; linux,default-trigger = "mmc1"; }; - user_led4 { + user_led4: led-4 { label = "red:user4"; gpios = <&gpio1 0 0>; panic-indicator; linux,default-trigger = "none"; }; - wlan_active_led { + wlan_active_led: led-5 { label = "red:wlan"; gpios = <&gpio1 1 0>; linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt_active_led { + bt_active_led: led-6 { label = "red:bt"; gpios = <&gpio1 4 0>; linux,default-trigger = "hci0-power"; @@ -114,32 +115,32 @@ }; leds { - user_led1: user_led1 { + user_led1_pin: user-led1-pin { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led2: user_led2 { + user_led2_pin: user-led2-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led3: user_led3 { + user_led3_pin: user-led3-pin { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led4: user_led4 { + user_led4_pin: user-led4-pin { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; - wlan_led: wlan_led { + wlan_led_pin: wlan-led-pin { rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_led: bt_led { + bt_led_pin: bt-led-pin { rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts index d63faf38cc..c4dd2a6b48 100644 --- a/arch/arm/dts/rk3399-firefly.dts +++ b/arch/arm/dts/rk3399-firefly.dts @@ -6,6 +6,7 @@ /dts-v1/; #include #include +#include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -13,6 +14,12 @@ model = "Firefly-RK3399 Board"; compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -88,18 +95,25 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - work-led { + work_led: led-0 { label = "work"; default-state = "on"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; }; - diy-led { + diy_led: led-1 { label = "diy"; default-state = "off"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; @@ -145,6 +159,23 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -190,6 +221,17 @@ vin-supply = <&vcc_sys>; }; + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -515,6 +557,53 @@ i2c-scl-falling-time-ns = <20>; status = "okay"; + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + ; + source-pdos = + ; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; + accelerometer@68 { compatible = "invensense,mpu6500"; reg = <0x68>; @@ -572,12 +661,34 @@ }; }; + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + leds { + work_led_pin: work-led-pin { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_pin: diy-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -589,18 +700,16 @@ }; pmic { - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - }; - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -610,9 +719,15 @@ }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -627,16 +742,6 @@ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - leds { - work_led_gpio: work_led-gpio { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_gpio: diy_led-gpio { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; &pwm0 { @@ -704,10 +809,29 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdif_bus_1>; + status = "okay"; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &tcphy0 { status = "okay"; }; +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -731,6 +855,12 @@ phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; }; &u2phy1 { diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi index f9c5bb607b..b80f19066b 100644 --- a/arch/arm/dts/rk3399-gru.dtsi +++ b/arch/arm/dts/rk3399-gru.dtsi @@ -10,6 +10,11 @@ #include "rk3399-op1-opp.dtsi" / { + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -247,8 +252,8 @@ enable-active-high; enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3000000 0x0>; + states = <1800000 0x1>, + <3000000 0x0>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; @@ -342,6 +347,7 @@ cpu-supply = <&ppvar_bigcpu>; }; + &cru { assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, @@ -515,7 +521,7 @@ ap_i2c_audio: &i2c8 { * configured as SDMMC and not JTAG. */ pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin &sdmmc_bus4>; bus-width = <4>; @@ -766,7 +772,7 @@ ap_i2c_audio: &i2c8 { }; /* This is where we actually hook up CD; has external pull */ - sdmmc_cd_gpio: sdmmc-cd-gpio { + sdmmc_cd_pin: sdmmc-cd-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi index e87a044774..d5c7648c84 100644 --- a/arch/arm/dts/rk3399-khadas-edge.dtsi +++ b/arch/arm/dts/rk3399-khadas-edge.dtsi @@ -11,6 +11,12 @@ #include "rk3399-opp.dtsi" / { + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -138,18 +144,26 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + linux,rc-map-name = "rc-khadas"; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>; + pinctrl-0 = <&sys_led_pin>, <&user_led_pin>; - sys-led { + sys_led: led-0 { label = "sys_led"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; }; - user-led { + user_led: led-1 { label = "user_led"; default-state = "off"; gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; @@ -585,12 +599,18 @@ }; }; + ir { + ir_rx: ir-rx { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { - sys_led_gpio: sys_led-gpio { + sys_led_pin: sys-led-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led_gpio: user_led-gpio { + user_led_pin: user-led-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -690,6 +710,16 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + spiflash: flash@0 { + compatible = "winbond,w25q128fw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts index 73be38a537..7c93f840bc 100644 --- a/arch/arm/dts/rk3399-leez-p710.dts +++ b/arch/arm/dts/rk3399-leez-p710.dts @@ -13,6 +13,12 @@ model = "Leez RK3399 P710"; compatible = "leez,p710", "rockchip,rk3399"; + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -341,7 +347,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -360,7 +366,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -447,11 +453,11 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts index e0d75617bb..452728b82e 100644 --- a/arch/arm/dts/rk3399-nanopc-t4.dts +++ b/arch/arm/dts/rk3399-nanopc-t4.dts @@ -95,6 +95,7 @@ }; &pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; vpcie3v3-supply = <&vcc3v3_sys>; }; diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts index 042c73ca17..cef4d18b59 100644 --- a/arch/arm/dts/rk3399-nanopi-r4s.dts +++ b/arch/arm/dts/rk3399-nanopi-r4s.dts @@ -1,13 +1,15 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * FriendlyElec NanoPC-T4 board device tree source * - * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd. * (http://www.friendlyarm.com) * * Copyright (c) 2018 Collabora Ltd. - * Copyright (c) 2019 Arm Ltd. - * Copyright (C) 2020 Xiaobo + * + * Copyright (c) 2020 Jensen Huang + * Copyright (c) 2020 Marty Jones + * Copyright (c) 2021 Tianling Shen */ /dts-v1/; @@ -17,74 +19,57 @@ model = "FriendlyElec NanoPi R4S"; compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399"; - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - }; + /delete-node/ display-subsystem; - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 12 18 255>; - #cooling-cells = <2>; - fan-supply = <&vdd_5v>; - pwms = <&pwm1 0 50000 0>; - }; -}; + gpio-leds { + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; -&cpu_thermal { - trips { - cpu_warm: cpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; + /delete-node/ led-0; - cpu_hot: cpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; + lan_led: led-lan { + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + label = "green:lan"; }; - }; - cooling-maps { - map2 { - trip = <&cpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; + sys_led: led-sys { + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + label = "red:power"; + default-state = "on"; }; - map3 { - trip = <&cpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + wan_led: led-wan { + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + label = "green:wan"; }; }; -}; -&emmc_phy { - status = "disabled"; -}; + gpio-keys { + pinctrl-0 = <&reset_button_pin>; -&fusb0 { - status = "disabled"; -}; + /delete-node/ power; -&leds { - lan_led: led-1 { - gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; - label = "green:lan"; + reset { + debounce-interval = <50>; + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = ; + }; }; - wan_led: led-2 { - gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - label = "green:wan"; + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; }; }; -&leds_gpio { - rockchip,pins = - <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>, - <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; +&emmc_phy { + status = "disabled"; +}; + +&i2c4 { + status = "disabled"; }; &pcie0 { @@ -93,6 +78,32 @@ vpcie3v3-supply = <&vcc3v3_sys>; }; +&pinctrl { + gpio-leds { + /delete-node/ status-led-pin; + + lan_led_pin: lan-led-pin { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rockchip-key { + /delete-node/ power-key; + + reset_button_pin: reset-button-pin { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + &sdhci { status = "disabled"; }; @@ -109,6 +120,10 @@ status = "disabled"; }; +&uart0 { + status = "disabled"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi index c88018a0ef..8c0ff6c96e 100644 --- a/arch/arm/dts/rk3399-nanopi4.dtsi +++ b/arch/arm/dts/rk3399-nanopi4.dtsi @@ -17,6 +17,12 @@ #include "rk3399-opp.dtsi" / { + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -117,9 +123,9 @@ leds: gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_gpio>; + pinctrl-0 = <&status_led_pin>; - status { + status_led: led-0 { gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; label = "status_led"; linux,default-trigger = "heartbeat"; @@ -182,7 +188,7 @@ #address-cells = <1>; #size-cells = <0>; - rtl8211e: phy@1 { + rtl8211e: ethernet-phy@1 { reg = <1>; interrupt-parent = <&gpio3>; interrupts = ; @@ -504,8 +510,6 @@ }; &pcie0 { - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; - max-link-speed = <2>; num-lanes = <2>; vpcie0v9-supply = <&vcca0v9_s3>; vpcie1v8-supply = <&vcca1v8_s3>; @@ -520,12 +524,12 @@ }; gpio-leds { - leds_gpio: leds-gpio { + status_led_pin: status-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - phy { + gmac { phy_intb: phy-intb { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi index d6f1095abb..da41cd81eb 100644 --- a/arch/arm/dts/rk3399-opp.dtsi +++ b/arch/arm/dts/rk3399-opp.dtsi @@ -10,28 +10,28 @@ opp00 { opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <800000>; + opp-microvolt = <825000 825000 1250000>; clock-latency-ns = <40000>; }; opp01 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <800000>; + opp-microvolt = <825000 825000 1250000>; }; opp02 { opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <850000>; + opp-microvolt = <850000 850000 1250000>; }; opp03 { opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <925000>; + opp-microvolt = <925000 925000 1250000>; }; opp04 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1000000>; + opp-microvolt = <1000000 1000000 1250000>; }; opp05 { opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1125000>; + opp-microvolt = <1125000 1125000 1250000>; }; }; @@ -41,36 +41,36 @@ opp00 { opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <800000>; + opp-microvolt = <825000 825000 1250000>; clock-latency-ns = <40000>; }; opp01 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <800000>; + opp-microvolt = <825000 825000 1250000>; }; opp02 { opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <825000>; + opp-microvolt = <825000 825000 1250000>; }; opp03 { opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <875000>; + opp-microvolt = <875000 875000 1250000>; }; opp04 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <950000>; + opp-microvolt = <950000 950000 1250000>; }; opp05 { opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1025000>; + opp-microvolt = <1025000 1025000 1250000>; }; opp06 { opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1100000>; + opp-microvolt = <1100000 1100000 1250000>; }; opp07 { opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1200000>; + opp-microvolt = <1200000 1200000 1250000>; }; }; @@ -79,27 +79,27 @@ opp00 { opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <800000>; + opp-microvolt = <825000 825000 1150000>; }; opp01 { opp-hz = /bits/ 64 <297000000>; - opp-microvolt = <800000>; + opp-microvolt = <825000 825000 1150000>; }; opp02 { opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <825000>; + opp-microvolt = <825000 825000 1150000>; }; opp03 { opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <875000>; + opp-microvolt = <875000 875000 1150000>; }; opp04 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <925000>; + opp-microvolt = <925000 925000 1150000>; }; opp05 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1100000>; + opp-microvolt = <1100000 1100000 1150000>; }; }; }; diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts index f9f7246d4d..04b54abea3 100644 --- a/arch/arm/dts/rk3399-orangepi.dts +++ b/arch/arm/dts/rk3399-orangepi.dts @@ -7,6 +7,7 @@ #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/input/input.h" +#include "dt-bindings/usb/pd.h" #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -14,6 +15,12 @@ model = "Orange Pi RK3399 Board"; compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -214,7 +221,7 @@ #address-cells = <1>; #size-cells = <0>; - rtl8211e: phy@1 { + rtl8211e: ethernet-phy@1 { reg = <1>; interrupt-parent = <&gpio3>; interrupts = ; @@ -531,6 +538,43 @@ pinctrl-names = "default"; pinctrl-0 = <&chg_cc_int_l>; vbus-supply = <&vbus_typec>; + + typec_con: connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + ; + source-pdos = + ; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec_hs: endpoint { + remote-endpoint = <&u2phy0_typec_hs>; + }; + }; + port@1 { + reg = <1>; + typec_ss: endpoint { + remote-endpoint = <&tcphy0_typec_ss>; + }; + }; + port@2 { + reg = <2>; + typec_dp: endpoint { + remote-endpoint = <&tcphy0_typec_dp>; + }; + }; + }; + }; }; }; @@ -554,7 +598,7 @@ }; }; - phy { + gmac { phy_intb: phy-intb { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; @@ -717,6 +761,22 @@ status = "okay"; }; +&tcphy0_dp { + port { + tcphy0_typec_dp: endpoint { + remote-endpoint = <&typec_dp>; + }; + }; +}; + +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -739,6 +799,12 @@ phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; }; &u2phy1 { @@ -799,7 +865,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts index 294d21bf45..2b5f001ff4 100644 --- a/arch/arm/dts/rk3399-pinebook-pro.dts +++ b/arch/arm/dts/rk3399-pinebook-pro.dts @@ -18,6 +18,12 @@ model = "Pine64 Pinebook Pro"; compatible = "pine64,pinebook-pro", "rockchip,rk3399"; + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -28,12 +34,19 @@ pwms = <&pwm0 0 740740 0>; }; + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <9800000>; + voltage-max-design-microvolt = <4350000>; + voltage-min-design-microvolt = <3000000>; + }; + edp_panel: edp-panel { compatible = "boe,nv140fhmn49"; backlight = <&backlight>; enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&panel_en_gpio>; + pinctrl-0 = <&panel_en_pin>; power-supply = <&vcc3v3_panel>; ports { @@ -60,7 +73,7 @@ gpio-key-lid { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&lidbtn_gpio>; + pinctrl-0 = <&lidbtn_pin>; lid { debounce-interval = <20>; @@ -76,7 +89,7 @@ gpio-key-power { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn_gpio>; + pinctrl-0 = <&pwrbtn_pin>; power { debounce-interval = <20>; @@ -90,9 +103,9 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pwrled_gpio &slpled_gpio>; + pinctrl-0 = <&pwr_led_pin &slp_led_pin>; - green-led { + green_led: led-0 { color = ; default-state = "on"; function = LED_FUNCTION_POWER; @@ -100,7 +113,7 @@ label = "green:power"; }; - red-led { + red_led: led-1 { color = ; default-state = "off"; function = LED_FUNCTION_STANDBY; @@ -117,7 +130,7 @@ clocks = <&rk808 1>; clock-names = "ext_clock"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h_gpio>; + pinctrl-0 = <&wifi_enable_h_pin>; post-power-on-delay-ms = <100>; power-off-delay-us = <500000>; @@ -129,7 +142,7 @@ es8316-sound { compatible = "simple-audio-card"; pinctrl-names = "default"; - pinctrl-0 = <&hp_det_gpio>; + pinctrl-0 = <&hp_det_pin>; simple-audio-card,name = "rockchip,es8316-codec"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; @@ -213,7 +226,7 @@ enable-active-high; gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&pwr_5v_gpio>; + pinctrl-0 = <&pwr_5v_pin>; regulator-name = "vcc5v0_usb"; regulator-always-on; regulator-min-microvolt = <5000000>; @@ -270,7 +283,7 @@ enable-active-high; gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h_gpio>; + pinctrl-0 = <&sdmmc0_pwr_h_pin>; regulator-name = "vcc3v0_sd"; regulator-always-on; regulator-min-microvolt = <3000000>; @@ -288,7 +301,7 @@ enable-active-high; gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&lcdvcc_en_gpio>; + pinctrl-0 = <&lcdvcc_en_pin>; regulator-name = "vcc3v3_panel"; regulator-always-on; regulator-min-microvolt = <3300000>; @@ -317,7 +330,7 @@ enable-active-high; gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en_gpio>; + pinctrl-0 = <&vcc5v0_host_en_pin>; regulator-name = "vcc5v0_otg"; regulator-always-on; regulator-min-microvolt = <5000000>; @@ -336,7 +349,7 @@ enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en_gpio>; + pinctrl-0 = <&vcc5v0_typec0_en_pin>; regulator-name = "vbus_5vout"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -368,7 +381,7 @@ /* Also triggered by USB charger */ pinctrl-names = "default"; - pinctrl-0 = <&dc_det_gpio>; + pinctrl-0 = <&dc_det_pin>; }; }; @@ -447,7 +460,7 @@ interrupt-parent = <&gpio3>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l_gpio>; + pinctrl-0 = <&pmic_int_l_pin>; rockchip,system-power-controller; wakeup-source; @@ -627,7 +640,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-always-on; regulator-boot-on; @@ -646,7 +659,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-always-on; regulator-boot-on; @@ -690,9 +703,10 @@ fusb0: fusb30x@22 { compatible = "fcs,fusb302"; reg = <0x22>; - fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = ; pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int_gpio>; + pinctrl-0 = <&fusb0_int_pin>; vbus-supply = <&vbus_typec>; connector { @@ -740,12 +754,29 @@ }; }; }; + + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + cellwise,battery-profile = /bits/ 8 < + 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 + 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 + 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 + 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 + 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 + 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D + 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 + >; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&bat>; + power-supplies = <&mains_charger>, <&fusb0>; + }; }; &i2s1 { - #sound-dai-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; + pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; rockchip,capture-channels = <8>; rockchip,playback-channels = <8>; status = "okay"; @@ -765,7 +796,6 @@ &pcie0 { bus-scan-delay-ms = <1000>; ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - max-link-speed = <2>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; @@ -777,116 +807,116 @@ &pinctrl { buttons { - pwrbtn_gpio: pwrbtn-gpio { + pwrbtn_pin: pwrbtn-pin { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; - lidbtn_gpio: lidbtn-gpio { + lidbtn_pin: lidbtn-pin { rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dc-charger { - dc_det_gpio: dc-det-gpio { + dc_det_pin: dc-det-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; es8316 { - hp_det_gpio: hp-det-gpio { + hp_det_pin: hp-det-pin { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; fusb302x { - fusb0_int_gpio: fusb0-int-gpio { + fusb0_int_pin: fusb0-int-pin { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; i2s1 { - i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { + i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; }; }; lcd-panel { - lcdvcc_en_gpio: lcdvcc-en-gpio { + lcdvcc_en_pin: lcdvcc-en-pin { rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; - panel_en_gpio: panel-en-gpio { + panel_en_pin: panel-en-pin { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; - lcd_panel_reset_gpio: lcd-panel-reset-gpio { + lcd_panel_reset_pin: lcd-panel-reset-pin { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { - pwrled_gpio: pwrled_gpio { + pwr_led_pin: pwr-led-pin { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; - slpled_gpio: slpled_gpio { + slp_led_pin: slp-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { - pmic_int_l_gpio: pmic-int-l-gpio { + pmic_int_l_pin: pmic-int-l-pin { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; sdcard { - sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { + sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { - wifi_enable_h_gpio: wifi-enable-h-gpio { + wifi_enable_h_pin: wifi-enable-h-pin { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb-typec { - vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { + vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { - pwr_5v_gpio: pwr-5v-gpio { + pwr_5v_pin: pwr-5v-pin { rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { + vcc5v0_host_en_pin: vcc5v0-host-en-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-bluetooth { - bt_wake_gpio: bt-wake-gpio { + bt_wake_pin: bt-wake-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_host_wake_gpio: bt-host-wake-gpio { + bt_host_wake_pin: bt-host-wake-pin { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_reset_gpio: bt-reset-gpio { + bt_reset_pin: bt-reset-pin { rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1034,7 +1064,7 @@ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; max-speed = <1500000>; pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; + pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; vbat-supply = <&wifi_bat>; vddio-supply = <&vcc_wl>; diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts index d80d6b7268..292bb7e80c 100644 --- a/arch/arm/dts/rk3399-puma-haikou.dts +++ b/arch/arm/dts/rk3399-puma-haikou.dts @@ -10,14 +10,18 @@ model = "Theobroma Systems RK3399-Q7 SoM"; compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399"; + aliases { + mmc1 = &sdmmc; + }; + chosen { stdout-path = "serial0:115200n8"; }; leds { - pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>; + pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; - sd-card-led { + sd_card_led: led-1 { label = "sd_card_led"; gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; @@ -179,7 +183,7 @@ }; leds { - led_sd_haikou: led-sd-gpio { + sd_card_led_pin: sd-card-led-pin { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 72c06abd27..fb67db4619 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -8,12 +8,16 @@ #include "rk3399-opp.dtsi" / { + aliases { + mmc0 = &sdhci; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_module>; + pinctrl-0 = <&module_led_pin>; - module-led { + module_led: led-0 { label = "module_led"; gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -21,57 +25,6 @@ }; }; - /* - * Overwrite the opp-table for CPUB as this board uses a different - * regulator (FAN53555) that only allows 10mV steps and therefore - * can't reach the operation point target voltages from rk3399-opp.dtsi - */ - /delete-node/ opp-table1; - cluster1_opp: opp-table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <800000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <800000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <830000>; - opp-suspend; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <880000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <950000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1030000>; - }; - opp06 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1100000>; - }; - opp07 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1200000>; - }; - opp08 { - opp-hz = /bits/ 64 <1992000000>; - opp-microvolt = <1230000>; - turbo-mode; - }; - }; - clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -450,7 +403,7 @@ }; leds { - led_pin_module: led-module-gpio { + module_led_pin: module-led-pin { rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts index 2acb3d500f..9447c8724b 100644 --- a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts +++ b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts @@ -11,6 +11,20 @@ model = "Firefly ROC-RK3399-PC Mezzanine Board"; compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; + aliases { + mmc2 = &sdio0; + }; + + /* MP8009 PoE PD */ + poe_12v: poe-12v { + compatible = "regulator-fixed"; + regulator-name = "poe_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + vcc3v3_ngff: vcc3v3-ngff { compatible = "regulator-fixed"; regulator-name = "vcc3v3_ngff"; @@ -22,7 +36,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vcc3v3_pcie: vcc3v3-pcie { @@ -34,10 +48,14 @@ pinctrl-0 = <&vcc3v3_pcie_en>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; }; +&sys_12v { + vin-supply = <&poe_12v>; +}; + &pcie_phy { status = "okay"; }; diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi index 9f225e9c3d..d1aaf8e833 100644 --- a/arch/arm/dts/rk3399-roc-pc.dtsi +++ b/arch/arm/dts/rk3399-roc-pc.dtsi @@ -13,6 +13,11 @@ model = "Firefly ROC-RK3399-PC Board"; compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -58,30 +63,37 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>; - work-led { + work_led: led-0 { label = "green:work"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; - diy-led { + diy_led: led-1 { label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc1"; + linux,default-trigger = "mmc2"; }; - yellow-led { + yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc0"; + linux,default-trigger = "mmc1"; }; }; @@ -110,6 +122,14 @@ regulator-max-microvolt = <5000000>; }; + sys_12v: sys-12v { + compatible = "regulator-fixed"; + regulator-name = "sys_12v"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc_12v>; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -141,7 +161,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vcca_0v9: vcca-0v9 { @@ -186,7 +206,7 @@ regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vdd_log: vdd-log { @@ -376,6 +396,7 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; @@ -456,7 +477,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -475,11 +496,13 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { @@ -588,6 +611,12 @@ }; }; + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -595,25 +624,25 @@ }; leds { - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - yellow_led_gpio: yellow_led-gpio { + yellow_led_pin: yellow-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi index 1c55a4645b..b28888ea92 100644 --- a/arch/arm/dts/rk3399-rock-pi-4.dtsi +++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi @@ -11,6 +11,11 @@ #include "rk3399-opp.dtsi" / { + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -111,10 +116,6 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; }; vdd_log: vdd-log { @@ -362,8 +363,6 @@ regulator-name = "vcc_cam"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -373,8 +372,6 @@ regulator-name = "vcc_mipi"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -387,7 +384,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -406,7 +403,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -440,8 +437,9 @@ }; &i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; + pinctrl-0 = <&i2s0_2ch_bus>; + rockchip,capture-channels = <2>; + rockchip,playback-channels = <2>; status = "okay"; }; @@ -476,7 +474,6 @@ &pcie0 { ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; - max-link-speed = <2>; num-lanes = <4>; pinctrl-0 = <&pcie_clkreqnb_cpm>; pinctrl-names = "default"; @@ -529,11 +526,11 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -680,7 +677,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts index d96dd3ebd3..89f2af5e11 100644 --- a/arch/arm/dts/rk3399-rock-pi-4a.dts +++ b/arch/arm/dts/rk3399-rock-pi-4a.dts @@ -9,5 +9,5 @@ / { model = "Radxa ROCK Pi 4A"; - compatible = "radxa,rockpi4", "rockchip,rk3399"; + compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399"; }; diff --git a/arch/arm/dts/rk3399-rock-pi-4b.dts b/arch/arm/dts/rk3399-rock-pi-4b.dts index 4ca970acac..6c63e61706 100644 --- a/arch/arm/dts/rk3399-rock-pi-4b.dts +++ b/arch/arm/dts/rk3399-rock-pi-4b.dts @@ -9,7 +9,11 @@ / { model = "Radxa ROCK Pi 4B"; - compatible = "radxa,rockpi4", "rockchip,rk3399"; + compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399"; + + aliases { + mmc2 = &sdio0; + }; }; &sdio0 { diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts index 9d07ebd1ec..99169bcd51 100644 --- a/arch/arm/dts/rk3399-rock-pi-4c.dts +++ b/arch/arm/dts/rk3399-rock-pi-4c.dts @@ -10,7 +10,11 @@ / { model = "Radxa ROCK Pi 4C"; - compatible = "radxa,rockpi4", "rockchip,rk3399"; + compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399"; + + aliases { + mmc2 = &sdio0; + }; }; &sdio0 { diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts index 437a75f31a..1a23e8f3cd 100644 --- a/arch/arm/dts/rk3399-rock960.dts +++ b/arch/arm/dts/rk3399-rock960.dts @@ -17,42 +17,43 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>, - <&user_led4>, <&wlan_led>, <&bt_led>; + pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>, + <&user_led3_pin>, <&user_led4_pin>, + <&wlan_led_pin>, <&bt_led_pin>; - user_led1 { + user_led1: led-1 { label = "green:user1"; gpios = <&gpio4 RK_PC2 0>; linux,default-trigger = "heartbeat"; }; - user_led2 { + user_led2: led-2 { label = "green:user2"; gpios = <&gpio4 RK_PC6 0>; linux,default-trigger = "mmc0"; }; - user_led3 { + user_led3: led-3 { label = "green:user3"; gpios = <&gpio4 RK_PD0 0>; linux,default-trigger = "mmc1"; }; - user_led4 { + user_led4: led-4 { label = "green:user4"; gpios = <&gpio4 RK_PD4 0>; panic-indicator; linux,default-trigger = "none"; }; - wlan_active_led { + wlan_active_led: led-5 { label = "yellow:wlan"; gpios = <&gpio4 RK_PD5 0>; linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt_active_led { + bt_active_led: led-6 { label = "blue:bt"; gpios = <&gpio4 RK_PD6 0>; linux,default-trigger = "hci0-power"; @@ -62,38 +63,52 @@ }; +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_thermal { + sustainable-power = <1550>; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; }; &pinctrl { leds { - user_led1: user_led1 { + user_led1_pin: user-led1-pin { rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led2: user_led2 { + user_led2_pin: user-led2-pin { rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led3: user_led3 { + user_led3_pin: user-led3-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led4: user_led4 { + user_led4_pin: user-led4-pin { rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; - wlan_led: wlan_led { + wlan_led_pin: wlan-led-pin { rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_led: bt_led { + bt_led_pin: bt-led-pin { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -124,45 +139,6 @@ status = "okay"; }; -&thermal_zones { - cpu_thermal: cpu { - polling-delay-passive = <100>; - polling-delay = <1000>; - thermal-sensors = <&tsadc 0>; - sustainable-power = <1550>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <65000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_alert1: cpu_alert1 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - - trip = <&cpu_alert1>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi index ba7c75c9f2..25dc61c26a 100644 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ b/arch/arm/dts/rk3399-rock960.dtsi @@ -9,6 +9,12 @@ #include "rk3399-opp.dtsi" / { + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; @@ -470,12 +476,12 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi index 9bca258012..6bff8db7d3 100644 --- a/arch/arm/dts/rk3399-rockpro64.dtsi +++ b/arch/arm/dts/rk3399-rockpro64.dtsi @@ -10,6 +10,12 @@ #include "rk3399-opp.dtsi" / { + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -36,18 +42,25 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - work-led { + work_led: led-0 { label = "work"; default-state = "on"; gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; }; - diy-led { + diy_led: led-1 { label = "diy"; default-state = "off"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; @@ -72,10 +85,27 @@ sound { compatible = "audio-graph-card"; - label = "rockchip,rk3399"; + label = "Analog"; dais = <&i2s1_p0>; }; + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -96,6 +126,24 @@ vin-supply = <&vcc_1v8>; }; + /* micro SD card power */ + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-name = "vcc3v0_sd"; + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -427,7 +475,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -446,7 +494,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -569,12 +617,18 @@ }; }; + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -594,15 +648,22 @@ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; + sdcard { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -661,6 +722,8 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; status = "okay"; }; @@ -671,6 +734,16 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdif_bus_1>; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &spi1 { status = "okay"; @@ -768,7 +841,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index 74f2c3d490..3871c7fd83 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -197,38 +197,12 @@ #clock-cells = <0>; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_bus: dma-controller@ff6d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = , - ; - #dma-cells = <1>; - clocks = <&cru ACLK_DMAC0_PERILP>; - clock-names = "apb_pclk"; - }; - - dmac_peri: dma-controller@ff6e0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = , - ; - #dma-cells = <1>; - clocks = <&cru ACLK_DMAC1_PERILP>; - clock-names = "apb_pclk"; - }; - }; - pcie0: pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -247,15 +221,14 @@ <0 0 0 2 &pcie0_intc 1>, <0 0 0 3 &pcie0_intc 2>, <0 0 0 4 &pcie0_intc 3>; - linux,pci-domain = <0>; max-link-speed = <1>; msi-map = <0x0 &its 0x0 0x1000>; phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 - 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; + ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, + <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, @@ -326,7 +299,7 @@ status = "disabled"; }; - sdhci: sdhci@fe330000 { + sdhci: mmc@fe330000 { compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; reg = <0x0 0xfe330000 0x0 0x10000>; interrupts = ; @@ -403,7 +376,7 @@ reset-names = "usb3-otg"; status = "disabled"; - usbdrd_dwc3_0: dwc3 { + usbdrd_dwc3_0: usb@fe800000 { compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = ; @@ -439,7 +412,7 @@ reset-names = "usb3-otg"; status = "disabled"; - usbdrd_dwc3_1: dwc3 { + usbdrd_dwc3_1: usb@fe900000 { compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = ; @@ -759,7 +732,7 @@ }; thermal_zones: thermal-zones { - cpu_thermal: cpu { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; polling-delay = <1000>; @@ -803,7 +776,7 @@ }; }; - gpu_thermal: gpu { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; polling-delay = <1000>; @@ -845,135 +818,135 @@ rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <1>; status = "disabled"; }; qos_emmc: qos@ffa58000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa58000 0x0 0x20>; }; qos_gmac: qos@ffa5c000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa5c000 0x0 0x20>; }; qos_pcie: qos@ffa60080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60080 0x0 0x20>; }; qos_usb_host0: qos@ffa60100 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60100 0x0 0x20>; }; qos_usb_host1: qos@ffa60180 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60180 0x0 0x20>; }; qos_usb_otg0: qos@ffa70000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa70000 0x0 0x20>; }; qos_usb_otg1: qos@ffa70080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa70080 0x0 0x20>; }; qos_sd: qos@ffa74000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa74000 0x0 0x20>; }; qos_sdioaudio: qos@ffa76000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa76000 0x0 0x20>; }; qos_hdcp: qos@ffa90000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa90000 0x0 0x20>; }; qos_iep: qos@ffa98000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa98000 0x0 0x20>; }; qos_isp0_m0: qos@ffaa0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa0000 0x0 0x20>; }; qos_isp0_m1: qos@ffaa0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa0080 0x0 0x20>; }; qos_isp1_m0: qos@ffaa8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa8000 0x0 0x20>; }; qos_isp1_m1: qos@ffaa8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa8080 0x0 0x20>; }; qos_rga_r: qos@ffab0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab0000 0x0 0x20>; }; qos_rga_w: qos@ffab0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab0080 0x0 0x20>; }; qos_video_m0: qos@ffab8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab8000 0x0 0x20>; }; qos_video_m1_r: qos@ffac0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac0000 0x0 0x20>; }; qos_video_m1_w: qos@ffac0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac0080 0x0 0x20>; }; qos_vop_big_r: qos@ffac8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac8000 0x0 0x20>; }; qos_vop_big_w: qos@ffac8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac8080 0x0 0x20>; }; qos_vop_little: qos@ffad0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffad0000 0x0 0x20>; }; qos_perihp: qos@ffad8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffad8080 0x0 0x20>; }; qos_gpu: qos@ffae0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffae0000 0x0 0x20>; }; @@ -995,126 +968,146 @@ #size-cells = <0>; /* These power domains are grouped by VD_CENTER */ - pd_iep@RK3399_PD_IEP { + power-domain@RK3399_PD_IEP { reg = ; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; pm_qos = <&qos_iep>; + #power-domain-cells = <0>; }; - pd_rga@RK3399_PD_RGA { + power-domain@RK3399_PD_RGA { reg = ; clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>; pm_qos = <&qos_rga_r>, <&qos_rga_w>; + #power-domain-cells = <0>; }; - pd_vcodec@RK3399_PD_VCODEC { + power-domain@RK3399_PD_VCODEC { reg = ; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; pm_qos = <&qos_video_m0>; + #power-domain-cells = <0>; }; - pd_vdu@RK3399_PD_VDU { + power-domain@RK3399_PD_VDU { reg = ; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; pm_qos = <&qos_video_m1_r>, <&qos_video_m1_w>; + #power-domain-cells = <0>; }; /* These power domains are grouped by VD_GPU */ - pd_gpu@RK3399_PD_GPU { + power-domain@RK3399_PD_GPU { reg = ; clocks = <&cru ACLK_GPU>; pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; }; /* These power domains are grouped by VD_LOGIC */ - pd_edp@RK3399_PD_EDP { + power-domain@RK3399_PD_EDP { reg = ; clocks = <&cru PCLK_EDP_CTRL>; + #power-domain-cells = <0>; }; - pd_emmc@RK3399_PD_EMMC { + power-domain@RK3399_PD_EMMC { reg = ; clocks = <&cru ACLK_EMMC>; pm_qos = <&qos_emmc>; + #power-domain-cells = <0>; }; - pd_gmac@RK3399_PD_GMAC { + power-domain@RK3399_PD_GMAC { reg = ; clocks = <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; pm_qos = <&qos_gmac>; + #power-domain-cells = <0>; }; - pd_sd@RK3399_PD_SD { + power-domain@RK3399_PD_SD { reg = ; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; pm_qos = <&qos_sd>; + #power-domain-cells = <0>; }; - pd_sdioaudio@RK3399_PD_SDIOAUDIO { + power-domain@RK3399_PD_SDIOAUDIO { reg = ; clocks = <&cru HCLK_SDIO>; pm_qos = <&qos_sdioaudio>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_TCPD0 { + reg = ; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_TCPD1 { + reg = ; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + #power-domain-cells = <0>; }; - pd_usb3@RK3399_PD_USB3 { + power-domain@RK3399_PD_USB3 { reg = ; clocks = <&cru ACLK_USB3>; pm_qos = <&qos_usb_otg0>, <&qos_usb_otg1>; + #power-domain-cells = <0>; }; - pd_vio@RK3399_PD_VIO { + power-domain@RK3399_PD_VIO { reg = ; + #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - pd_hdcp@RK3399_PD_HDCP { + power-domain@RK3399_PD_HDCP { reg = ; clocks = <&cru ACLK_HDCP>, <&cru HCLK_HDCP>, <&cru PCLK_HDCP>; pm_qos = <&qos_hdcp>; + #power-domain-cells = <0>; }; - pd_isp0@RK3399_PD_ISP0 { + power-domain@RK3399_PD_ISP0 { reg = ; clocks = <&cru ACLK_ISP0>, <&cru HCLK_ISP0>; pm_qos = <&qos_isp0_m0>, <&qos_isp0_m1>; + #power-domain-cells = <0>; }; - pd_isp1@RK3399_PD_ISP1 { + power-domain@RK3399_PD_ISP1 { reg = ; clocks = <&cru ACLK_ISP1>, <&cru HCLK_ISP1>; pm_qos = <&qos_isp1_m0>, <&qos_isp1_m1>; + #power-domain-cells = <0>; }; - pd_tcpc0@RK3399_PD_TCPC0 { - reg = ; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - }; - pd_tcpc1@RK3399_PD_TCPC1 { - reg = ; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - }; - pd_vo@RK3399_PD_VO { + power-domain@RK3399_PD_VO { reg = ; + #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - pd_vopb@RK3399_PD_VOPB { + power-domain@RK3399_PD_VOPB { reg = ; clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; pm_qos = <&qos_vop_big_r>, <&qos_vop_big_w>; + #power-domain-cells = <0>; }; - pd_vopl@RK3399_PD_VOPL { + power-domain@RK3399_PD_VOPL { reg = ; clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; pm_qos = <&qos_vop_little>; + #power-domain-cells = <0>; }; }; }; @@ -1124,8 +1117,6 @@ pmugrf: syscon@ff320000 { compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff320000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; pmu_io_domains: io-domains { compatible = "rockchip,rk3399-pmu-io-voltage-domain"; @@ -1211,7 +1202,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; clocks = <&pmucru PCLK_RKPWM_PMU>; - clock-names = "pwm"; status = "disabled"; }; @@ -1222,7 +1212,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; clocks = <&pmucru PCLK_RKPWM_PMU>; - clock-names = "pwm"; status = "disabled"; }; @@ -1233,7 +1222,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; clocks = <&pmucru PCLK_RKPWM_PMU>; - clock-names = "pwm"; status = "disabled"; }; @@ -1244,7 +1232,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm3a_pin>; clocks = <&pmucru PCLK_RKPWM_PMU>; - clock-names = "pwm"; status = "disabled"; }; @@ -1271,6 +1258,17 @@ power-domains = <&power RK3399_PD_VCODEC>; }; + vdec: video-codec@ff660000 { + compatible = "rockchip,rk3399-vdec"; + reg = <0x0 0xff660000 0x0 0x400>; + interrupts = ; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, + <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + iommus = <&vdec_mmu>; + power-domains = <&power RK3399_PD_VDU>; + }; + vdec_mmu: iommu@ff660480 { compatible = "rockchip,iommu"; reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; @@ -1278,8 +1276,8 @@ interrupt-names = "vdec_mmu"; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; clock-names = "aclk", "iface"; + power-domains = <&power RK3399_PD_VDU>; #iommu-cells = <0>; - status = "disabled"; }; iep_mmu: iommu@ff670800 { @@ -1336,6 +1334,28 @@ }; }; + dmac_bus: dma-controller@ff6d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6d0000 0x0 0x4000>; + interrupts = , + ; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0_PERILP>; + clock-names = "apb_pclk"; + }; + + dmac_peri: dma-controller@ff6e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6e0000 0x0 0x4000>; + interrupts = , + ; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1_PERILP>; + clock-names = "apb_pclk"; + }; + pmucru: pmu-clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; @@ -1387,7 +1407,18 @@ status = "disabled"; }; - u2phy0: usb2-phy@e450 { + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy0: usb2phy@e450 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>; clocks = <&cru SCLK_USB2PHY0_REF>; @@ -1414,7 +1445,7 @@ }; }; - u2phy1: usb2-phy@e460 { + u2phy1: usb2phy@e460 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe460 0x10>; clocks = <&cru SCLK_USB2PHY1_REF>; @@ -1513,7 +1544,7 @@ }; watchdog@ff848000 { - compatible = "snps,dw-wdt"; + compatible = "rockchip,rk3399-wdt", "snps,dw-wdt"; reg = <0x0 0xff848000 0x0 0x100>; clocks = <&cru PCLK_WDT>; interrupts = ; @@ -1700,6 +1731,32 @@ status = "disabled"; }; + isp0: isp0@ff910000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff910000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_ISP0>, + <&cru ACLK_ISP0_WRAPPER>, + <&cru HCLK_ISP0_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp0_mmu>; + phys = <&mipi_dphy_rx0>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + isp0_mmu: iommu@ff914000 { compatible = "rockchip,iommu"; reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; @@ -1883,10 +1940,10 @@ gpu: gpu@ff9a0000 { compatible = "rockchip,rk3399-mali", "arm,mali-t860"; reg = <0x0 0xff9a0000 0x0 0x10000>; - interrupts = , - , - ; - interrupt-names = "gpu", "job", "mmu"; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; #cooling-cells = <2>; power-domains = <&power RK3399_PD_GPU>; @@ -2317,7 +2374,7 @@ }; }; - sleep { + suspend { ap_pwroff: ap-pwroff { rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; }; @@ -2475,7 +2532,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi index 5d087be04a..e1cb426f2a 100644 --- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi +++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi @@ -12,6 +12,11 @@ / { compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + vcc3v3_pcie: vcc-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -324,7 +329,6 @@ &pcie0 { ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - max-link-speed = <2>; num-lanes = <4>; pinctrl-0 = <&pcie_clkreqnb_cpm>; pinctrl-names = "default"; @@ -353,6 +357,12 @@ }; }; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vbus_host { usb1_en_oc: usb1-en-oc { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; -- cgit v1.2.3