From 53193a4f07c9e7a7d42493863712352cf16f1258 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Fri, 7 Jul 2017 10:16:42 +0200 Subject: powerpc, 8xx: Add support for MCR3000 board from CSSI CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000 and CMPC885 which are respectively based on MPC866 and MPC885 processors. This patch adds support for the first board. Signed-off-by: Christophe Leroy --- board/cssi/MAINTAINERS | 6 ++ board/cssi/MCR3000/Kconfig | 15 +++++ board/cssi/MCR3000/MCR3000.c | 144 ++++++++++++++++++++++++++++++++++++++++++ board/cssi/MCR3000/Makefile | 10 +++ board/cssi/MCR3000/nand.c | 65 +++++++++++++++++++ board/cssi/MCR3000/u-boot.lds | 91 ++++++++++++++++++++++++++ 6 files changed, 331 insertions(+) create mode 100644 board/cssi/MAINTAINERS create mode 100644 board/cssi/MCR3000/Kconfig create mode 100644 board/cssi/MCR3000/MCR3000.c create mode 100644 board/cssi/MCR3000/Makefile create mode 100644 board/cssi/MCR3000/nand.c create mode 100644 board/cssi/MCR3000/u-boot.lds (limited to 'board/cssi') diff --git a/board/cssi/MAINTAINERS b/board/cssi/MAINTAINERS new file mode 100644 index 0000000000..cbf1406a54 --- /dev/null +++ b/board/cssi/MAINTAINERS @@ -0,0 +1,6 @@ +BOARDS from CS Systemes d'Information +M: Christophe Leroy +S: Maintained +F: board/cssi/ +F: include/configs/MCR3000.h +F: configs/MCR3000_defconfig diff --git a/board/cssi/MCR3000/Kconfig b/board/cssi/MCR3000/Kconfig new file mode 100644 index 0000000000..ecfd90fd4c --- /dev/null +++ b/board/cssi/MCR3000/Kconfig @@ -0,0 +1,15 @@ +if TARGET_MCR3000 + +config SYS_BOARD + default "MCR3000" + +config SYS_VENDOR + default "cssi" + +config SYS_CONFIG_NAME + default "MCR3000" + +config SYS_TEXT_BASE + default 0x04000000 + +endif diff --git a/board/cssi/MCR3000/MCR3000.c b/board/cssi/MCR3000/MCR3000.c new file mode 100644 index 0000000000..43c4cb77bb --- /dev/null +++ b/board/cssi/MCR3000/MCR3000.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2010-2017 CS Systemes d'Information + * Florent Trinh Thai + * Christophe Leroy + * + * Board specific routines for the MCR3000 board + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static const uint cs1_dram_table_66[] = { + /* DRAM - single read. (offset 0 in upm RAM) */ + 0x0F3DFC04, 0x0FEFBC04, 0x00BE7804, 0x0FFDF400, + 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* DRAM - burst read. (offset 8 in upm RAM) */ + 0x0F3DFC04, 0x0FEFBC04, 0x00BF7C04, 0x00FFFC00, + 0x00FFFC00, 0x00FEF800, 0x0FFDF400, 0x1FFFFC05, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* DRAM - single write. (offset 18 in upm RAM) */ + 0x0F3DFC04, 0x0FEFB800, 0x00BF7404, 0x0FFEF804, + 0x0FFDF404, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, + + /* DRAM - burst write. (offset 20 in upm RAM) */ + 0x0F3DFC04, 0x0FEFB800, 0x00BF7400, 0x00FFFC00, + 0x00FFFC00, 0x00FFFC04, 0x0FFEF804, 0x0FFDF404, + 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* refresh (offset 30 in upm RAM) */ + 0x0FFDF404, 0x0FFEBC04, 0x0FFD7C84, 0x0FFFFC04, + 0x0FFFFC04, 0x0FFFFC04, 0x1FFFFC85, 0xFFFFFFFF, + + /* init */ + 0x0FEEB874, 0x0FBD7474, 0x1FFFFC45, 0xFFFFFFFF, + + /* exception. (offset 3c in upm RAM) */ + 0xFFFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, +}; + +int ft_board_setup(void *blob, bd_t *bd) +{ + const char *sync = "receive"; + + ft_cpu_setup(blob, bd); + + /* BRG */ + do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", + bd->bi_busfreq, 1); + + /* MAC addr */ + fdt_fixup_ethernet(blob); + + /* Bus Frequency for CPM */ + do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1); + + /* E1 interface - Set data rate */ + do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1); + + /* E1 interface - Set channel phase to 0 */ + do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1); + + /* E1 interface - rising edge sync pulse transmit */ + do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse", + sync, strlen(sync), 1); + + return 0; +} + +int checkboard(void) +{ + serial_puts("BOARD: MCR3000 CSSI\n"); + + return 0; +} + +int dram_init(void) +{ + immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR; + memctl8xx_t __iomem *memctl = &immap->im_memctl; + + printf("UPMA init for SDRAM (CAS latency 2), "); + printf("init address 0x%08x, size ", (int)dram_init); + /* Configure UPMA for cs1 */ + upmconfig(UPMA, (uint *)cs1_dram_table_66, + sizeof(cs1_dram_table_66) / sizeof(uint)); + udelay(10); + out_be16(&memctl->memc_mptpr, 0x0200); + out_be32(&memctl->memc_mamr, 0x14904000); + udelay(10); + out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_PRELIM); + out_be32(&memctl->memc_br1, CONFIG_SYS_BR1_PRELIM); + udelay(10); + out_be32(&memctl->memc_mcr, 0x80002830); + out_be32(&memctl->memc_mar, 0x00000088); + out_be32(&memctl->memc_mcr, 0x80002038); + udelay(200); + + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + SDRAM_MAX_SIZE); + + return 0; +} + +int misc_init_r(void) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + iop8xx_t __iomem *iop = &immr->im_ioport; + + /* Set port C13 as GPIO (BTN_ACQ_AL) */ + clrbits_be16(&iop->iop_pcpar, 0x4); + clrbits_be16(&iop->iop_pcdir, 0x4); + + /* if BTN_ACQ_AL is pressed then bootdelay is changed to 60 second */ + if ((in_be16(&iop->iop_pcdat) & 0x0004) == 0) + setenv("bootdelay", "60"); + + return 0; +} + +int board_early_init_f(void) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + + /* + * Erase FPGA(s) for reboot + */ + clrbits_be32(&immr->im_cpm.cp_pbdat, 0x00020000); /* PROGFPGA down */ + setbits_be32(&immr->im_cpm.cp_pbdir, 0x00020000); /* PROGFPGA output */ + udelay(1); /* Wait more than 300ns */ + setbits_be32(&immr->im_cpm.cp_pbdat, 0x00020000); /* PROGFPGA up */ + + return 0; +} diff --git a/board/cssi/MCR3000/Makefile b/board/cssi/MCR3000/Makefile new file mode 100644 index 0000000000..401d5aa4c1 --- /dev/null +++ b/board/cssi/MCR3000/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (C) 2010-2017 CS Systemes d'Information +# Christophe Leroy +# +# SPDX-License-Identifier: GPL-2.0+ +# +# + +obj-y += MCR3000.o +obj-$(CONFIG_CMD_NAND) += nand.o diff --git a/board/cssi/MCR3000/nand.c b/board/cssi/MCR3000/nand.c new file mode 100644 index 0000000000..8e5b0d0618 --- /dev/null +++ b/board/cssi/MCR3000/nand.c @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2010-2017 CS Systemes d'Information + * Florent Trinh Thai + * Christophe Leroy + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#define BIT_CLE ((unsigned short)0x0800) +#define BIT_ALE ((unsigned short)0x0400) +#define BIT_NCE ((unsigned short)0x1000) + +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtdinfo->priv; + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + unsigned short pddat = 0; + + /* The hardware control change */ + if (ctrl & NAND_CTRL_CHANGE) { + pddat = in_be16(&immr->im_ioport.iop_pddat); + + /* Clearing ALE and CLE */ + pddat &= ~(BIT_CLE | BIT_ALE); + + /* Driving NCE pin */ + if (ctrl & NAND_NCE) + pddat &= ~BIT_NCE; + else + pddat |= BIT_NCE; + + /* Driving CLE and ALE pin */ + if (ctrl & NAND_CLE) + pddat |= BIT_CLE; + if (ctrl & NAND_ALE) + pddat |= BIT_ALE; + + out_be16(&immr->im_ioport.iop_pddat, pddat); + } + + /* Writing the command */ + if (cmd != NAND_CMD_NONE) + out_8(this->IO_ADDR_W, cmd); +} + +int board_nand_init(struct nand_chip *nand) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + + /* Set GPIO Port */ + setbits_be16(&immr->im_ioport.iop_pddir, 0x1c00); + clrbits_be16(&immr->im_ioport.iop_pdpar, 0x1c00); + clrsetbits_be16(&immr->im_ioport.iop_pddat, 0x0c00, 0x1000); + + nand->chip_delay = 60; + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = nand_hwcontrol; + + return 0; +} diff --git a/board/cssi/MCR3000/u-boot.lds b/board/cssi/MCR3000/u-boot.lds new file mode 100644 index 0000000000..cd042ca0ce --- /dev/null +++ b/board/cssi/MCR3000/u-boot.lds @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2010-2017 CS Systemes d'Information + * Christophe Leroy + * + * (C) Copyright 2001-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Modified by Yuli Barcohen + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .text : + { + arch/powerpc/cpu/mpc8xx/start.o (.text) + arch/powerpc/cpu/mpc8xx/start.o (.text*) + arch/powerpc/cpu/mpc8xx/traps.o (.text*) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) + board/cssi/MCR3000/built-in.o (.text*) + disk/built-in.o (.text*) + drivers/net/built-in.o (.text*) + + *(.text) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + KEEP(*(.got)) + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data*) + *(.sdata*) + } + _edata = .; + PROVIDE (edata = .); + + . = .; + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.bss*) + *(.sbss*) + *(COMMON) + . = ALIGN(4); + } + __bss_end = . ; + PROVIDE (end = .); +} +ENTRY(_start) -- cgit v1.2.3