From 2ac06f3e66c13b793f9b0859888b7062f24910e6 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 21 Dec 2021 12:20:12 +0100 Subject: board: gdsys: a38x: Enable PCIe link 2 in spl_board_init() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A385 controlcenterdc board does not use PCI DM properly and touches some PCIe devices directly in its board code. This controlcenterdc spl_board_init() function expects that PCIe link is already initialized. Link itself is initialized in a38x serdes code but this will change in future and link initialization will be postponed from U-Boot SPL to proper U-Boot. So explicitly enable PCIe link 2 in spl_board_init() function via SoC Control Register 1 to not break this code by future changes. This board has PCIe link 2 just x1, so no additional initialization (except enabling PCIe port) is needed. Signed-off-by: Pali Rohár --- board/gdsys/a38x/controlcenterdc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'board/gdsys') diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c index 243d022326..7d65400ccb 100644 --- a/board/gdsys/a38x/controlcenterdc.c +++ b/board/gdsys/a38x/controlcenterdc.c @@ -100,6 +100,10 @@ void spl_board_init(void) uint k; struct gpio_desc gpio = {}; + /* Enable PCIe link 2 */ + setbits_32(MVEBU_REGISTER(0x18204), BIT(2)); + mdelay(10); + if (!request_gpio_by_name(&gpio, "pca9698@22", 31, "fpga-program-gpio")) { /* prepare FPGA reconfiguration */ dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT); -- cgit v1.2.3